Lippert ABS 8K Hybrid Threaded Brake Hub Kit - Black, 9/16-in Studs - 2025077675
Ready to order
Lippert ABS 8K Hybrid Threaded Brake Hub Kit - Black, 9/16-in Studs - 2025077675
---
Lippert ABS 8K Hybrid Threaded Brake Hub Kit - Black, 9/16-in Studs - 2025077675
Lippert 2025077675 is a black hybrid-threaded ABS brake hub complete kit for one wheel end on a matching 8,000-pound hybrid spring axle. It accepts a 12-inch brake, uses an 8 on 6-1/2-inch bolt pattern and 9/16-inch studs, and is listed for 16 to 17-1/2-inch wheels. Its cast-in tone-ring teeth work with the existing Lippert ABS sensor and Lippert ABS electric brakes; it is not compatible with Dexter ABS.
The kit combines the brake hub with cap and spindle hardware for wheel-end service. Lippert describes the hybrid design as providing the same overhang as a standard 7,000-pound axle while using a larger outer bearing. That description does not make it a drop-in replacement for every 7K or 8K axle: match the original hybrid assembly, spindle, bearings, seals, wheel and ABS system before ordering. A complete brake, sensor, controller, wheel and axle are not itemized as included.
Why Choose This Hybrid ABS Hub Kit?
- Hybrid wheel-end design: accepts a 12-inch brake and provides Lippert's stated standard-7K overhang with a larger outer bearing; confirm the exact assembly match.
- Lippert ABS interface: cast-in tone-ring teeth work with the existing sensor and compatible Lippert ABS electric brakes.
- Defined fit: 8,000-lb hybrid spring axle application, eight studs on a 6.5-inch bolt circle and 9/16-inch stud size.
- Wheel range: listed for 16 to 17-1/2-inch wheels with the matching 12-inch brake hub.
- Durable hub: black cast-iron construction with pre-installed races and corrosion-resistant zinc-plated studs.
- Threaded cap interface: accepts Valcrum threaded dust caps; use the correct cap and service requirements for the original assembly.
- Single wheel end: one hub kit in a kraft box, with a limited one-year materials/workmanship warranty under Lippert's terms.
Technical Specifications
- SKU: 2025077675
- Brand: Lippert
- Series: ABS
- Stud Size: 9/16"
- Brake Type: ABS Compatible
- Axle Type: Hybrid Spring
- Axle Capacity: 8,000 lbs.
- Hub Style: Brake Hub
- Hub Bolt Pattern: 8 on 6.5"
- Hardware Type: Hub
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- UPC: 848150077868
- Shipping Dimensions: 15.5" L x 14" W x 7.5" H, 39.8 lbs.
Before You Order
Confirm the original axle tag, hybrid hub geometry, bearing and seal numbers, brake size, wheel bolt circle, stud diameter and Lippert ABS system. A shared capacity or bolt pattern alone does not establish fit.
What is included?
The written contents list names one ABS brake hub assembly, one dust cap with plug, one cotter pin, one six-slot castle spindle nut, one spindle washer and five 60-degree cone trailer lug nuts. The photos show eight lug nuts and the hub has eight studs. Confirm the supplied nut count and obtain the correct complete fastener set before installation. Races and studs are explicitly described as pre-installed; bearing and seal part numbers and installed-bearing status are not explicitly specified in the written list.
Does it fit every 8K axle or Dexter ABS?
No. Match the original Lippert hybrid spring axle, spindle, bearing and seal requirements, 8,000-pound axle application, 8 on 6.5-inch bolt pattern, 9/16-inch studs, 12-inch brake and listed 16 to 17-1/2-inch wheel range. Lippert expressly excludes Dexter ABS. Generic universal-fit language on the source does not override these specific restrictions.
How does hybrid differ from standard threaded?
Lippert states that this hybrid hub accepts a 12-inch brake, provides the same overhang as a standard 7,000-pound axle and has a larger outer bearing than standard axles. Exact bearing numbers and overhang measurements are not supplied. Standard-threaded 12-1/4-inch ABS kits are separate configurations; do not substitute them based only on stud size, color or an 8K rating.
Is it a complete ABS conversion?
No. It services one wheel end in an existing compatible Lippert ABS system. A sensor, ABS module, wiring, brake backing-plate assembly, wheel and complete axle are not listed as included. The 8,000-pound rating describes the axle application, not an added rating per hub.
Which lubricant and cap should I use?
The source confirms a Valcrum threaded dust-cap interface, but this exact page does not specify the service lubricant, oil or grease grade, fill level, or cap torque. Photos show bearing elements with red lubricant and a clear-window cap; those details do not establish a service procedure. Follow the exact axle, bearing, seal and threaded-cap instructions. Do not treat this threaded opening as a press-in dust cap.
Are installation instructions supplied on this page?
The Product Support link opens Lippert's general support homepage; no exact kit manual is linked. Have a qualified trailer technician confirm spindle and bearing fit, ABS sensor alignment, brake adjustment, lubrication and fastener requirements using the original assembly instructions. No installation torque or bearing-preload procedure is inferred from generic hub instructions.
What measurements are provided?
The listed shipping size is 15.5 x 14 x 7.5 inches with shipping weight 39.8 pounds. Those are package figures, not installed hub width, spindle diameter, bearing bores or offset. Confirm the original assembly separately when dimensional fit matters.
Which part number and OEM references should I match?
Match Lippert SKU 2025077675 and UPC 848150077868 along with the original axle identification. The focused source page names no separate OEM cross-reference, superseded part number or exact parent axle SKU. None is inferred from similar-looking hubs.
Compare Other Configurations
The black 9/16-inch standard-threaded ABS hub kit 2025077678 uses a different, 12-1/4-inch brake configuration. The red standard-threaded 9/16-inch kit 2025077679 is another separate configuration. Compare specifications; neither standard-threaded kit is established as interchangeable with this hybrid kit.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 2025077675 |
|---|---|
| Brand | Lippert |
| Series | ABS |
| Stud size | 9/16" |
| Brake type | ABS Compatible |
| Axle type | Hybrid Spring |
| Axle capacity | 8,000 lbs. |
| Hub style | Brake Hub |
| Hub bolt pattern | 8 on 6.5" |
| Hardware type | Hub |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Upc | 848150077868 |
| Shipping dimensions | 15.5" L x 14" W x 7.5" H, 39.8 lbs. |
- What is included? The written contents list names one ABS brake hub assembly, one dust cap with plug, one cotter pin, one six-slot castle spindle nut, one spindle washer and five 60-degree cone trailer lug nuts. The photos show eight lug nuts and the hub has eight studs. Confirm the supplied nut count and obtain the correct complete fastener set before installation. Races and studs are explicitly described as pre-installed; bearing and seal part numbers and installed-bearing status are not explicitly specified in the written list.
- Does it fit every 8k axle or dexter abs? No. Match the original Lippert hybrid spring axle, spindle, bearing and seal requirements, 8,000-pound axle application, 8 on 6.5-inch bolt pattern, 9/16-inch studs, 12-inch brake and listed 16 to 17-1/2-inch wheel range. Lippert expressly excludes Dexter ABS. Generic universal-fit language on the source does not override these specific restrictions.
- How does hybrid differ from standard threaded? Lippert states that this hybrid hub accepts a 12-inch brake, provides the same overhang as a standard 7,000-pound axle and has a larger outer bearing than standard axles. Exact bearing numbers and overhang measurements are not supplied. Standard-threaded 12-1/4-inch ABS kits are separate configurations; do not substitute them based only on stud size, color or an 8K rating.
- Is it a complete abs conversion? No. It services one wheel end in an existing compatible Lippert ABS system. A sensor, ABS module, wiring, brake backing-plate assembly, wheel and complete axle are not listed as included. The 8,000-pound rating describes the axle application, not an added rating per hub.
- Which lubricant and cap should i use? The source confirms a Valcrum threaded dust-cap interface, but this exact page does not specify the service lubricant, oil or grease grade, fill level, or cap torque. Photos show bearing elements with red lubricant and a clear-window cap; those details do not establish a service procedure. Follow the exact axle, bearing, seal and threaded-cap instructions. Do not treat this threaded opening as a press-in dust cap.
- Are installation instructions supplied on this page? The Product Support link opens Lippert's general support homepage; no exact kit manual is linked. Have a qualified trailer technician confirm spindle and bearing fit, ABS sensor alignment, brake adjustment, lubrication and fastener requirements using the original assembly instructions. No installation torque or bearing-preload procedure is inferred from generic hub instructions.
- What measurements are provided? The listed shipping size is 15.5 x 14 x 7.5 inches with shipping weight 39.8 pounds. Those are package figures, not installed hub width, spindle diameter, bearing bores or offset. Confirm the original assembly separately when dimensional fit matters.
- Which part number and oem references should i match? Match Lippert SKU 2025077675 and UPC 848150077868 along with the original axle identification. The focused source page names no separate OEM cross-reference, superseded part number or exact parent axle SKU. None is inferred from similar-looking hubs.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.











