Lippert ABS 8K Threaded Brake Hub Kit - Red, 9/16-in Studs - 2025077679
Ready to order
Lippert ABS 8K Threaded Brake Hub Kit - Red, 9/16-in Studs - 2025077679
---
Lippert ABS 8K Threaded Brake Hub Kit - Red, 9/16-in Studs - 2025077679
Lippert 2025077679 is a red, standard-threaded ABS brake hub kit for one wheel end on a matching 8,000-pound axle. It uses an 8 on 6-1/2-inch bolt pattern, 9/16-inch studs and a 12-1/4-inch brake hub, with a listed wheel range of 16 to 17-1/2 inches. Its cast-in tone-ring teeth work with the existing Lippert ABS sensor and Lippert ABS electric brakes; it is not compatible with Dexter ABS.
Why Choose This ABS Hub Kit?
- One-wheel-end replacement kit for the specified Lippert ABS electric-brake application.
- Cast-in ABS tone-ring teeth interface with the existing Lippert ABS sensor.
- 8,000-lb axle application, 8 on 6.5-inch bolt pattern and 9/16-inch studs.
- 12-1/4-inch red cast-iron brake hub for matching 16 to 17-1/2-inch wheels.
- Oil-bath lubrication; standard-threaded opening accepts Valcrum threaded dust caps.
- Races and zinc-plated wheel studs are pre-installed; shipped in a kraft box.
- Not compatible with Dexter ABS; verify spindle, bearings, brake and wheel details.
Technical Specifications
- SKU: 2025077679
- Brand: Lippert
- Series: ABS
- Stud Size: 9/16"
- Brake Type: ABS Compatible
- Lubrication System: Oil Bath
- Axle Capacity: 8,000 lbs.
- Brake Size: 12-1/4"
- Hub Style: Brake Hub
- Hub Bolt Pattern: 8 on 6.5"
- Wheel Size: 16" - 17-1/2"
- Hardware Type: Hub
- Material Type: Cast Iron
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- UPC: 848150077905
- Shipping Dimensions: 14.5" L x 14.5" W x 9.5" H, 61.98 lbs.
What is included?
The written list names one ABS brake hub assembly, one dust cap with plug, one cotter pin, one six-slot castle spindle nut, one spindle washer and five 60-degree cone trailer lug nuts. The hardware photos show eight lug nuts and the hub has eight studs. Lippert’s written quantity and photos conflict; confirm the supplied nut count and obtain the correct complete fastener set for the wheel before installation. The page explicitly confirms pre-installed races and studs, but does not name bearing or seal part numbers or explicitly confirm installed bearings.
Does it work with Dexter ABS or every 8K axle?
No. Lippert expressly excludes Dexter ABS. Match the original Lippert ABS system, spindle and bearing/seal requirements as well as the 8,000-lb axle application, 8 on 6.5-inch bolt circle, 9/16-inch studs, 12-1/4-inch brake hub and listed 16 to 17-1/2-inch wheel range. Generic universal-fit wording on the source does not override those requirements.
Is it a complete ABS conversion?
No. It services one wheel end and works with the existing Lippert ABS sensor and compatible Lippert ABS electric brakes. A sensor, control module, brake backing-plate assembly, wiring, wheel or complete axle is not itemized as included. The 8,000-pound rating describes the axle application, not an additional rating per hub.
Which lubrication and cap arrangement does it use?
The specification says Oil Bath and the source says it accepts Valcrum threaded dust caps. Confirm the correct oil, fill level, seal and cap service instructions for the original assembly. The linked general ABS manual illustrates a different press-in cap; do not pry out or hammer in this threaded cap using that illustration. The photos show bearing elements with red lubricant, but do not establish the final service lubricant or fill procedure; follow the original assembly requirements.
What installation instructions are available?
The linked ABS Hubs manual CCD-0011131, revision 07.24.26, gives general wheel-end identification, support, hub removal, brake adjustment, replacement and wheel-torque guidance. Its diagram is general, not this kit’s packing list. Use the exact axle, bearing and threaded oil-cap instructions for final installation. Support the trailer by its frame as the RV manufacturer directs, use suitable jack stands and a new cotter pin, and have a qualified technician check brake adjustment and ABS sensor interface.
What wheel torque should I use?
Use the correct wheel and fastener manufacturer specification. The general manual lists 9/16-inch wheel-torque rows for 16- and 16.5-inch wheels; those rows do not establish every 17-1/2-inch wheel application in this product’s stated range. Confirm wheel, nut-seat and fastener requirements. The manual calls for staged tightening in the correct eight-lug sequence and rechecks after 10, 25 and 50 miles. Temporary spindle-nut seating torque is not final wheel-lug torque.
What size is the package?
Lippert lists shipping dimensions of 14.5 x 14.5 x 9.5 inches and shipping weight 61.98 pounds. These are package figures, not spindle, bearing, hub-offset or mounting dimensions.
Manuals and Documents
ABS Hubs Installation Manual - General Aftermarket Guidance
Limited one-year warranty covers materials or workmanship defects under Lippert’s terms.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 2025077679 |
|---|---|
| Brand | Lippert |
| Series | ABS |
| Stud size | 9/16" |
| Brake type | ABS Compatible |
| Lubrication system | Oil Bath |
| Axle capacity | 8,000 lbs. |
| Brake size | 12-1/4" |
| Hub style | Brake Hub |
| Hub bolt pattern | 8 on 6.5" |
| Wheel size | 16" - 17-1/2" |
| Hardware type | Hub |
| Material type | Cast Iron |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Upc | 848150077905 |
| Shipping dimensions | 14.5" L x 14.5" W x 9.5" H, 61.98 lbs. |
- What is included? The written list names one ABS brake hub assembly, one dust cap with plug, one cotter pin, one six-slot castle spindle nut, one spindle washer and five 60-degree cone trailer lug nuts. The hardware photos show eight lug nuts and the hub has eight studs. Lippert’s written quantity and photos conflict; confirm the supplied nut count and obtain the correct complete fastener set for the wheel before installation. The page explicitly confirms pre-installed races and studs, but does not name bearing or seal part numbers or explicitly confirm installed bearings.
- Does it work with dexter abs or every 8k axle? No. Lippert expressly excludes Dexter ABS. Match the original Lippert ABS system, spindle and bearing/seal requirements as well as the 8,000-lb axle application, 8 on 6.5-inch bolt circle, 9/16-inch studs, 12-1/4-inch brake hub and listed 16 to 17-1/2-inch wheel range. Generic universal-fit wording on the source does not override those requirements.
- Is it a complete abs conversion? No. It services one wheel end and works with the existing Lippert ABS sensor and compatible Lippert ABS electric brakes. A sensor, control module, brake backing-plate assembly, wiring, wheel or complete axle is not itemized as included. The 8,000-pound rating describes the axle application, not an additional rating per hub.
- Which lubrication and cap arrangement does it use? The specification says Oil Bath and the source says it accepts Valcrum threaded dust caps. Confirm the correct oil, fill level, seal and cap service instructions for the original assembly. The linked general ABS manual illustrates a different press-in cap; do not pry out or hammer in this threaded cap using that illustration. The photos show bearing elements with red lubricant, but do not establish the final service lubricant or fill procedure; follow the original assembly requirements.
- What installation instructions are available? The linked ABS Hubs manual CCD-0011131, revision 07.24.26, gives general wheel-end identification, support, hub removal, brake adjustment, replacement and wheel-torque guidance. Its diagram is general, not this kit’s packing list. Use the exact axle, bearing and threaded oil-cap instructions for final installation. Support the trailer by its frame as the RV manufacturer directs, use suitable jack stands and a new cotter pin, and have a qualified technician check brake adjustment and ABS sensor interface.
- What wheel torque should i use? Use the correct wheel and fastener manufacturer specification. The general manual lists 9/16-inch wheel-torque rows for 16- and 16.5-inch wheels; those rows do not establish every 17-1/2-inch wheel application in this product’s stated range. Confirm wheel, nut-seat and fastener requirements. The manual calls for staged tightening in the correct eight-lug sequence and rechecks after 10, 25 and 50 miles. Temporary spindle-nut seating torque is not final wheel-lug torque.
- What size is the package? Lippert lists shipping dimensions of 14.5 x 14.5 x 9.5 inches and shipping weight 61.98 pounds. These are package figures, not spindle, bearing, hub-offset or mounting dimensions.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.











