Lippert 70-Inch Super Slide I Cargo Tray - 379507
Ready to order
Lippert 70-Inch Super Slide I Cargo Tray - 379507
---
Reach Your RV Cargo with Super Slide I
Bring the contents of a deep RV storage compartment within reach with the 70-inch Kwikee Super Slide I from Lippert. This cargo slide is rated for 1,000 lbs and uses roller-bearing action to move the completed tray outward. A spring-loaded latch secures the slide in three positions for access and storage.
The tray width is set by the size of your compartment and the plywood deck you supply. Lippert states that a plywood bottom and a separately purchased trim kit are required to complete installation. U-channel and an L-bracket are listed for trim and stiffener use; the specification table nevertheless identifies the cargo trim kit and cargo mounts as not included. Plan those installation materials before ordering.
Why Choose This Lippert Cargo Slide?
- 1,000-lb capacity: The published cargo capacity supports a properly installed, completed tray.
- Roller-bearing action: Industrial-grade ball-bearing slides provide smooth access to stored cargo.
- Three locking positions: A spring-loaded latch secures the one-way slide in three positions.
- Custom deck width: The compartment and your plywood bottom establish the finished tray width.
Technical Specifications
- SKU: 379507
- Brand: Lippert
- Series: Kwikee®, Super Slide I
- Cargo Trim Kit Included: No
- Cargo Mounts Included: No
- Compartment Depth: 70"
- Cargo Locking Method: Spring-Loaded Latch
- Storage Application: Universal
- Weight Capacity: 1,000 lbs.
- Cargo Slide Method: 1-Way (3-Position)
- Unit of Measure: EA
- Warranty Term: 1 Year
- Item Length (Inches): 70.06
- Item Width (Inches): 5.13
- Item Height (Inches): 2.25
- Manufacturer Reference Number: 905856000
- Shipping Dimensions: 70" L x 24" W x 24" H, 57.962 lbs.
Measure and Plan Your Installation
This SKU is the 70-inch compartment-depth version of Super Slide I. Measure the compartment, doorway, mounting surface and available travel before selecting it. Lippert describes the storage application as universal and says the design fits almost any sub-floor compartment; those descriptions do not replace checking the dimensions and mounting arrangement in your RV.
The manufacturer describes finishing the owner-supplied plywood with carpet, rubber matting or vinyl. The product photograph illustrates a completed carpeted tray; it does not change the stated requirement to provide the plywood bottom and buy the trim kit separately. Use the shipping measurements in the specifications for the package, and the stated compartment depth for initial size selection.
Installation Guide Notes
The linked SuperSlide guide specifies a 3/4-inch plywood deck, supplied by the installer, and a 1,000-lb maximum load distributed evenly. It shows base brackets mounted square and parallel, set at least 2.5 inches behind the compartment door or door hardware. Bolts, washers, nuts and deck screws are installation supplies; determine their size and quantity from the mounting surface and the full guide. Use caution when operating on an unlevel vehicle.
The guide describes the SuperSlide system generally. The exact product page marks cargo mounts and the trim kit as not included; check which mounting parts you already have and obtain the required pieces before installation. The assembly illustration also confirms that flooring is not included.
Manuals and Documents
| Sku | 379507 |
|---|---|
| Brand | Lippert |
| Series | Kwikee®, Super Slide I |
| Cargo trim kit included | No |
| Cargo mounts included | No |
| Compartment depth | 70" |
| Cargo locking method | Spring-Loaded Latch |
| Storage application | Universal |
| Weight capacity | 1,000 lbs. |
| Cargo slide method | 1-Way (3-Position) |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Item length (inches) | 70.06 |
| Item width (inches) | 5.13 |
| Item height (inches) | 2.25 |
| Manufacturer reference number | 905856000 |
| Shipping dimensions | 70" L x 24" W x 24" H, 57.962 lbs. |
- Is the plywood deck included? No. Lippert states that a plywood bottom must be supplied to complete installation.
- Is the trim kit included? No. A separate trim kit is required; the specification table also marks cargo mounts as not included.
- What is the weight capacity? The manufacturer lists a 1,000-lb capacity.
- How does the tray lock? A spring-loaded latch locks the one-way cargo slide in three positions.
- What determines the width? Your compartment and the plywood bottom you supply determine the finished tray width.
- Which compartment depth is listed? 70 inches. Measure your compartment and mounting arrangement before ordering.
- What load and deck does the installation guide specify? A maximum of 1,000 lbs. distributed evenly and an installer-supplied 3/4-inch plywood deck. Read the full guide and match the mounting surface and compartment dimensions.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


