Lippert 4,000-lb Slipper Spring, 6 Leaves, 2 in Wide - 334744
Ready to order
Lippert 4,000-lb Slipper Spring, 6 Leaves, 2 in Wide - 334744
---
Six-Leaf Slipper Spring with E5115 Reference
Lippert 334744 is a 2-inch-wide, six-leaf steel slipper spring rated at 4,000 pounds per spring assembly. Its layered leaves flex to absorb road shock, while the single bushed eye and formed slipper end must match the original trailer suspension.
One spring is listed with the eye bushing pre-installed; hangers are separate. Lippert labels its 29-1/2-inch length eye-to-eye even though this is a single-eye slipper design. Compare that source measurement with the original equipment record rather than assuming a loaded or unloaded measuring convention.
Why Choose This Slipper Spring?
- 4,000-pound spring assembly: The stated rating applies to one spring assembly, within the limits of the complete suspension.
- Six steel leaves: A 2-inch-wide layered steel pack flexes to absorb road shock and vibrations.
- Single-eye slipper design: The bushed eye and formed slipper end must match the original mounting arrangement.
- Published replacement references: Standens E5115 and Dexter-compatible E-5115 support identification.
- One replacement spring: The source lists one spring, with the eye bushing pre-installed and hanger kits sold separately.
Technical Specifications
- SKU: 334744
- Brand: Lippert
- Weight Capacity: 4,000 lbs.
- Standens Leaf Spring Number: E5115
- Spring Layer Count: 6
- Eye To Eye Length: 29.5
- Axle Spring Type: Slipper Leaf
- Load Arch Length: 2.5
- Axle Type: Spring
- Hardware Type: Spring
- Unit of Measure: EA
- Item Length (Inches): 29.5
- Item Width (Inches): 2
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: CHN
- Dexter Compatible Part Number: E-5115
- UPC: 848150066961
- Shipping Dimensions: 46" L x 6" W x 6" H, 26.72 lbs.
Before You Order
Match Lippert 334744, Standens E5115, Dexter-compatible E-5115 and UPC 848150066961 to the original spring record. Confirm six leaves, 2-inch width, the eye and slipper profile, and the actual length convention. The 46 x 6 x 6-inch, 26.72-pound shipping data describes the package, not installed spring dimensions.
Is 4,000 pounds the rating for one spring or a pair?
Lippert states 4,000 pounds per spring assembly and lists one spring per package. This does not certify a new axle or trailer capacity; keep the limits of the axle, chassis, tires and other suspension parts.
How is the 29-1/2-inch length measured?
The title calls it eye-to-eye and the table lists Eye To Eye Length 29.5 and Item Length (Inches) 29.5. The spring has a single-eye slipper design, so it does not have two eyes. The focused source does not define measurement endpoints or explicitly label this length loaded or unloaded; match the original measurement convention.
What is supplied with the spring?
One slipper leaf spring is listed with pre-installed eye bushings. Hanger kits are sold separately and pre-mounted hangers are required. A complete axle, U-bolts, mounting bolts and nuts are not itemized as included.
Which replacement numbers should I compare?
The manufacturer lists Standens E5115, Dexter-compatible E-5115, Lippert SKU 334744 and UPC 848150066961. Compare the original equipment label and mounting geometry as well as these references.
Does Load Arch Length 2.5 define a ride-height change?
The source field gives 2.5 without a unit or a measurement diagram. It is preserved as printed, without treating it as a verified installed arch height or promising a ride-height change.
Will it fit a competitor axle?
Lippert describes use with most competitor trailer axles. Verify rating, 2-inch width, single-eye and slipper geometry, actual length convention, bushing bore and hanger arrangement. The page does not identify an exact parent axle or mounting kit.
Is the seven-leaf 710494 an interchangeable option?
No interchangeable fit is established. The separately listed 710494 has seven leaves and a different published length. A shared 4,000-pound rating and 2-inch width do not make the springs substitutes.
Are installation torque and bolt details specified?
The focused page supplies no bushing bore, center-bolt position, fastener thread or installation torque for this SKU. Confirm the exact suspension and use its service instructions before installation.
Compare Different Spring Specifications
The seven-leaf 4,000-pound spring 710494 and six-leaf 3,500-pound spring 797547 are different specifications. These comparison links do not establish interchangeable fitment or a capacity upgrade.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 334744 |
|---|---|
| Brand | Lippert |
| Weight capacity | 4,000 lbs. |
| Standens leaf spring number | E5115 |
| Spring layer count | 6 |
| Eye to eye length | 29.5 |
| Axle spring type | Slipper Leaf |
| Load arch length | 2.5 |
| Axle type | Spring |
| Hardware type | Spring |
| Unit of measure | EA |
| Item length (inches) | 29.5 |
| Item width (inches) | 2 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | CHN |
| Dexter compatible part number | E-5115 |
| Upc | 848150066961 |
| Shipping dimensions | 46" L x 6" W x 6" H, 26.72 lbs. |
- Is 4,000 pounds the rating for one spring or a pair? Lippert states 4,000 pounds per spring assembly and lists one spring per package. This does not certify a new axle or trailer capacity; keep the limits of the axle, chassis, tires and other suspension parts.
- How is the 29-1/2-inch length measured? The title calls it eye-to-eye and the table lists Eye To Eye Length 29.5 and Item Length (Inches) 29.5. The spring has a single-eye slipper design, so it does not have two eyes. The focused source does not define measurement endpoints or explicitly label this length loaded or unloaded; match the original measurement convention.
- What is supplied with the spring? One slipper leaf spring is listed with pre-installed eye bushings. Hanger kits are sold separately and pre-mounted hangers are required. A complete axle, U-bolts, mounting bolts and nuts are not itemized as included.
- Which replacement numbers should i compare? The manufacturer lists Standens E5115, Dexter-compatible E-5115, Lippert SKU 334744 and UPC 848150066961. Compare the original equipment label and mounting geometry as well as these references.
- Does load arch length 2.5 define a ride-height change? The source field gives 2.5 without a unit or a measurement diagram. It is preserved as printed, without treating it as a verified installed arch height or promising a ride-height change.
- Will it fit a competitor axle? Lippert describes use with most competitor trailer axles. Verify rating, 2-inch width, single-eye and slipper geometry, actual length convention, bushing bore and hanger arrangement. The page does not identify an exact parent axle or mounting kit.
- Is the seven-leaf 710494 an interchangeable option? No interchangeable fit is established. The separately listed 710494 has seven leaves and a different published length. A shared 4,000-pound rating and 2-inch width do not make the springs substitutes.
- Are installation torque and bolt details specified? The focused page supplies no bushing bore, center-bolt position, fastener thread or installation torque for this SKU. Confirm the exact suspension and use its service instructions before installation.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


