Lippert 3,500-lb Slipper Spring, 6 Leaves, 2 in Wide - 797547
Ready to order
Lippert 3,500-lb Slipper Spring, 6 Leaves, 2 in Wide - 797547
---
Six-Leaf Slipper Spring with HW-5116 Reference
Lippert 797547 is a steel slipper leaf spring with six leaves, a 2-inch width and a stated 3,500-pound capacity for one spring assembly. It replaces a matching spring in a trailer suspension after its end shape, measurements and mounting arrangement are confirmed.
One spring is listed per package. The manufacturer states that the eye bushing is pre-installed and that hanger kits are separate. The photo shows a single bushed eye and a formed slipper end; the source nevertheless labels its 26.5-inch length as eye-to-eye, so confirm the measurement convention against the original spring.
Why Choose This Slipper Spring?
- 3,500-pound spring rating: The stated capacity belongs to one spring assembly; it does not increase the trailer or axle rating.
- Six steel leaves: A layered steel pack flexes as the matching suspension moves.
- Two-inch width: Compare the hanger, axle seat and slipper support with the required 2-inch spring width.
- Single-eye slipper shape: The original photo shows one bushed eye and a formed slipper end.
- Pre-installed bushing: Lippert states the spring eye bushing is installed; separate hangers are required.
- HW-5116 identification: Both the Standens and Dexter-compatible reference fields list HW-5116; quick facts write HW5116.
Technical Specifications
- SKU: 797547
- Brand: Lippert
- Weight Capacity: 3,500 lbs.
- Standens Leaf Spring Number: HW-5116
- Spring Layer Count: 6
- Eye To Eye Length: 26.5
- Axle Spring Type: Slipper Leaf
- Load Arch Length: 2
- Axle Type: Spring
- Hardware Type: Spring
- Unit of Measure: EA
- Item Width (Inches): 2
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- Dexter Compatible Part Number: HW-5116
- UPC: 848150066978
- Shipping Dimensions: 27.5" L x 7" W x 3" H, 30 lbs.
Before You Order
Compare Lippert 797547, HW-5116 / HW5116 and UPC 848150066978 with the original equipment label. Check the 2-inch width, six-leaf pack, single-eye slipper shape, spring rating and actual mounting dimensions. Lippert does not specify the eye bore, bushing material, center-bolt offset or exact parent axle for this SKU. The length field has no endpoint or loaded-state diagram.
Is 3,500 pounds the rating for one spring or an axle pair?
Lippert states a 3,500-pound spring assembly capacity and one spring per package. This is a per-spring figure. It does not certify a complete axle pair, increase the axle rating or override the lowest-rated trailer component.
Why does the page say eye-to-eye for a slipper spring?
Lippert labels the length 26.5 inches and calls it eye-to-eye, while the product is identified and pictured as a single-eye slipper spring. The page does not define the two measurement endpoints or loaded versus unloaded state. Confirm the original reference and physical length convention before ordering.
What does Load Arch Length 2 mean?
The source table prints Load Arch Length as 2 without a unit or measurement diagram. It is retained as a source field, not converted into a verified installed arch or ride-height specification.
What is supplied?
One slipper leaf spring is listed. Lippert states that bushings are pre-installed in the spring eyes. Hanger kits are sold separately; U-bolts, mounting bolts, nuts, equalizers and axle seats are not itemized as included.
Will HW-5116 fit every trailer axle?
HW-5116 is the published Standens leaf-spring and Dexter-compatible reference. Lippert also describes use with most competitor axles. Match width, capacity, end style, length convention, eye and hanger dimensions and the original equipment label; the focused source does not map this SKU to a specific parent axle.
What manual is linked?
The linked suspension-support page offers CCD-0011277, the RV leaf springs and bushings installation manual, revised August 19, 2026. All ten pages cover double-eye and slipper configurations, but do not name 797547 or HW-5116. Use the applicable section as general service context and verify the actual mounting system.
Can I use a torque value from another spring design?
Do not select a torque value by spring capacity alone. The general manual separates double-eye, slipper and heavy-duty slipper hardware. It does not identify the exact fastener sizes supplied with this individual spring. Match the installed hardware and applicable equipment instructions.
Are the box dimensions the spring dimensions?
No. The 27.5 x 7 x 3-inch dimensions and 30-pound weight are shipping fields. They are distinct from the 2-inch spring width and the source-labeled 26.5-inch length.
Manuals and Documents
RV Leaf Springs and Bushings Installation Manual — CCD-0011277 is a general aftermarket guide. Match the applicable suspension section; its illustrations and hardware specifications do not establish an exact parent or mounting kit for this spring.
Compare a Different Slipper Spring
The Lippert 176326 5,000-pound spring has a different width, length and leaf count. It is a comparison item rather than an interchangeable capacity upgrade.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 797547 |
|---|---|
| Brand | Lippert |
| Weight capacity | 3,500 lbs. |
| Standens leaf spring number | HW-5116 |
| Spring layer count | 6 |
| Eye to eye length | 26.5 |
| Axle spring type | Slipper Leaf |
| Load arch length | 2 |
| Axle type | Spring |
| Hardware type | Spring |
| Unit of measure | EA |
| Item width (inches) | 2 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Dexter compatible part number | HW-5116 |
| Upc | 848150066978 |
| Shipping dimensions | 27.5" L x 7" W x 3" H, 30 lbs. |
- Is 3,500 pounds the rating for one spring or an axle pair? Lippert states a 3,500-pound spring assembly capacity and one spring per package. This is a per-spring figure. It does not certify a complete axle pair, increase the axle rating or override the lowest-rated trailer component.
- Why does the page say eye-to-eye for a slipper spring? Lippert labels the length 26.5 inches and calls it eye-to-eye, while the product is identified and pictured as a single-eye slipper spring. The page does not define the two measurement endpoints or loaded versus unloaded state. Confirm the original reference and physical length convention before ordering.
- What does load arch length 2 mean? The source table prints Load Arch Length as 2 without a unit or measurement diagram. It is retained as a source field, not converted into a verified installed arch or ride-height specification.
- What is supplied? One slipper leaf spring is listed. Lippert states that bushings are pre-installed in the spring eyes. Hanger kits are sold separately; U-bolts, mounting bolts, nuts, equalizers and axle seats are not itemized as included.
- Will hw-5116 fit every trailer axle? HW-5116 is the published Standens leaf-spring and Dexter-compatible reference. Lippert also describes use with most competitor axles. Match width, capacity, end style, length convention, eye and hanger dimensions and the original equipment label; the focused source does not map this SKU to a specific parent axle.
- What manual is linked? The linked suspension-support page offers CCD-0011277, the RV leaf springs and bushings installation manual, revised August 19, 2026. All ten pages cover double-eye and slipper configurations, but do not name 797547 or HW-5116. Use the applicable section as general service context and verify the actual mounting system.
- Can i use a torque value from another spring design? Do not select a torque value by spring capacity alone. The general manual separates double-eye, slipper and heavy-duty slipper hardware. It does not identify the exact fastener sizes supplied with this individual spring. Match the installed hardware and applicable equipment instructions.
- Are the box dimensions the spring dimensions? No. The 27.5 x 7 x 3-inch dimensions and 30-pound weight are shipping fields. They are distinct from the 2-inch spring width and the source-labeled 26.5-inch length.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.



