Lippert 29.5-Inch Outside-Mount Landing Gear Follow Leg - 122532
Ready to order
Lippert 29.5-Inch Outside-Mount Landing Gear Follow Leg - 122532
---
Lippert 29.5-Inch Outside-Mount Landing Gear Follow Leg - 122532
Lippert 122532 is the standard-length, outside-frame-mount follow leg for a correctly matched Venture-style power landing-gear assembly. Its 29.5-inch measurement is the length of the outer black tube, not jack travel or overall extended height. The follow/idler leg works opposite the motor-driven lead leg; it is not the motor mounting side.
One replacement leg is listed. The current exact sales page explicitly sells the pin, foot pad and mounting hardware separately, even though the representative product image shows a lower pin. A motor, gearbox, cross shaft, switch, harness and second leg are not itemized as included. This is not a complete two-leg power landing-gear system.
Why Choose This Part?
- Configuration: Follow / idler leg for a matched Venture-style system.
- Mount: Outside-frame configuration confirmed by the exact sales page and component chart.
- Size: Standard 29.5-inch outer black tube.
- Package: One leg; pin, foot pad and mounting hardware separate.
- Identification: The exact cap type is not established by a correctly numbered TI-155 column; inspect the original cap.
Technical Specifications
- SKU: 122532
- Brand: Lippert
- Jack Mounting Location: Outside Mount
- Jack Type: Landing Gear
- Warranty Term: 1 Year
- Quantity In Package: 1
- Product Length: 29.5" (Standard)
- Country of Origin: USA
- Unit of Measure: EA
- Keystone RV Part Number: 169210
- Shipping Dimensions: 38" L x 8.5" W x 4" H, 27 lbs.
Before You Order
The electric landing-gear component chart identifies 122532 at callout A as the 29.5-inch outside-mount follow leg. Match the original part number, tube length, frame mounting, drive/idler role, mounting tabs and cap construction. TI-155 / CCD-0002050 instead prints 112532 above its 29.5-inch outside-frame idler column; it does not exactly name 122532. Use the current sales page and exact 122532 component-chart row for identity, and verify cap construction on the original leg rather than silently treating the two numbers as equivalent. Keystone RV 169210 are part cross-references, not fit to every RV of those brands. Lead/follow describes the mechanism role, not a universal driver/passenger vehicle position.
Installation and Reference Notes
The older component chart describes 122532 with a snapper pin, but the current sales page explicitly says pin, foot pad and mounting hardware are sold separately. The older wording is not a current accessory promise. The assembly guide shows the complete system layout rather than this SKU’s package inventory. No numerical load rating or jack travel is published on the focused page; a generic 6K family manual does not establish this exact leg’s rating. Use the matched installation/service procedure and prescribed vehicle supports. Do not use the landing-gear assembly alone for tire changes or vehicle servicing. Other mounting locations, lengths and extra-tab versions are separate options, not automatic substitutes.
Published shipping reference: 38" L x 8.5" W x 4" H, 27 lbs.. These are transport data, not installed dimensions.
Related Parts
Compare another follow-leg mounting and length option. Match its configuration independently. Browse landing gear and leveling parts.
Manuals and Documents
| Sku | 122532 |
|---|---|
| Brand | Lippert |
| Jack mounting location | Outside Mount |
| Jack type | Landing Gear |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Product length | 29.5" (Standard) |
| Country of origin | USA |
| Unit of measure | EA |
| Keystone rv part number | 169210 |
| Shipping dimensions | 38" L x 8.5" W x 4" H, 27 lbs. |
- What does 29.5 inches measure? The outer black tube, not jack travel, fully extended height or carton length.
- Which mechanism side and mount is this? Follow / idler configuration with outside-frame mounting. Match the original leg’s exact geometry.
- Does it include the pin, footpad or hardware? The current sales page sells all three separately. The older component chart says with snapper pin, and the representative image shows a pin; neither overrides the current package statement.
- Does a motor or second leg come with it? No motor, gearbox, cross shaft, harness, switch or second leg is itemized as included. One replacement leg is listed.
- Can i substitute a different length or mounting location? Verify the complete original application first. Tube length, frame mount, drive/idler role and cap construction are separate selection attributes.
- Is the numerical capacity or travel established? No exact load rating or stroke is published on the focused sales page. Do not infer one from a generic family guide or shipping size.
- Why does ti-155 show 112532? That is what the linked chart actually prints. The current sales page and electric landing-gear component chart identify 122532. We do not silently correct the document or infer exact cap fit from the differently numbered column.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


