Lippert 33.5-Inch Inside-Mount Landing Gear Follow Leg - 126385
Ready to order
Lippert 33.5-Inch Inside-Mount Landing Gear Follow Leg - 126385
---
Lippert 33.5-Inch Inside-Mount Landing Gear Follow Leg - 126385
Lippert 126385 is the inside-frame-mount, extended-length follow landing-gear leg for a matched Venture-style power landing-gear assembly. The 33.5-inch measurement describes the outer black tube, not jack travel, overall extended height or the shipping carton.
The listing supplies one follow leg assembly, not a complete two-leg landing-gear system. The current page explicitly sells the pin, foot pad and mounting hardware separately. A motor, gearbox, cross shaft, switch, harness and second leg are not itemized as included. The idler designation identifies the mechanism configuration; it does not establish driver/passenger position on an RV.
Why Choose This Part?
- Configuration: Follow / idler side of a matched Venture-style power system.
- Mounting: Inside-frame configuration confirmed by exact page and TI-155.
- Size: 33.5-inch outer black tube, not travel or overall extended height.
- Cap: Press-fit identification in TI-155.
- Repair scope: One leg; pin, foot pad and mounting hardware sold separately.
Technical Specifications
- SKU: 126385
- Brand: Lippert
- Jack Mounting Location: Inside Mount
- Jack Type: Landing Gear
- Warranty Term: 1 Year
- Quantity In Package: 1
- Product Length: 33.5" (Extended)
- Country of Origin: CHN
- Unit of Measure: EA
- Heartland Part Number: 24662
- Shipping Dimensions: 45" L x 10.5" W x 7" H, 29 lbs.
Before You Order
TI-155 / CCD-0002050 identifies exact SKU 126385 as 33.5-inch outer-tube length, idler configuration, inside-frame mounting and press-fit cap. The electric landing-gear component chart places it at callout A, Inside 33.5-inch Extended Follow Leg. Match all four identification attributes, the original leg number and mounting tabs. Do not substitute the outside-mount or 29.5-inch version based only on appearance. The follow/idler side is opposite the leg where the motor attaches; it is driven by the matched system, not a separate included motor. The exact page lists Heartland reference 24662 as an identification aid, not fit to every Heartland RV.
Installation and Reference Notes
Source-content conflict: the January 2018 component chart describes these legs with a snapper pin, but the current exact sales page says pin, foot pad and mounting hardware are sold separately. Do not rely on the older drawing as a promise of current included accessories. The assembly guide is a family layout, not a package inventory for this single SKU. No numerical capacity, jack stroke or motor rating is published on the focused page; the support index's generic 6K manuals do not establish this leg's rating. Obtain the correct system installation and service procedure, support the RV as prescribed and identify all needed hardware before replacement. The manufacturer support FAQ says the assembly alone is not intended for tire changes or servicing the vehicle. Inside/outside mount identifies the frame-rail configuration, not a universal adapter or a permission to modify the bracket.
Published shipping reference: 45" L x 10.5" W x 7" H, 29 lbs. These are transport data, not installed dimensions.
Related Parts
Browse related parts. Verify dimensions and application separately before selecting another item.
Manuals and Documents
| Sku | 126385 |
|---|---|
| Brand | Lippert |
| Jack mounting location | Inside Mount |
| Jack type | Landing Gear |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Product length | 33.5" (Extended) |
| Country of origin | CHN |
| Unit of measure | EA |
| Heartland part number | 24662 |
| Shipping dimensions | 45" L x 10.5" W x 7" H, 29 lbs. |
- What does 33.5 inches measure? The outer black tube. It is not a published travel, maximum height or shipping-box length.
- Which leg and mount is this? Follow / idler configuration, inside-frame mounting and press-fit cap. Match the original number and all TI-155 identification attributes.
- Are the pin, foot pad and mounting hardware included? The current sales page says all three are sold separately. The older component chart says with snapper pin; that historical line does not promise a supplied pin today.
- Does it include the motor or a pair of legs? No motor, gearbox, cross shaft, switch, harness or second leg is itemized as included. This is one replacement leg assembly.
- Does inside mean the same as lead or follow? No. Inside identifies the frame-rail mount; lead and follow identify the mechanism side. Confirm both independently.
- Is a capacity or jack stroke established here? No numerical rating or stroke is published for this exact leg on the focused page. Do not copy a generic family rating.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


