Lippert 16K Oil Brake Hub with Installed Bearings, 8 on 275 mm - 2025048503
Ready to order
Lippert 16K Oil Brake Hub with Installed Bearings, 8 on 275 mm - 2025048503
---
Lippert 16K Oil Brake Hub with Installed Bearings, 8 on 275 mm - 2025048503
Lippert 2025048503 is a 12-1/4-inch standard threaded oil brake hub assembly with an installed bearing kit for the specified 16,000-lb axle application. It has an eight-stud wheel pattern on a 275 mm bolt circle and M22 studs. The hub provides the drum surface against which compatible brake shoes act.
The product page lists a brake hub assembly and bearing kit, with bearing races and zinc-plated wheel studs pre-installed. This is a brake hub, rather than an idler hub or a complete axle. A backing-plate brake assembly, wheel and tire are not listed as package contents. The page does not itemize bearing or seal numbers, or confirm that a threaded oil cap, lubricant, lug nuts and spindle hardware are included; verify those requirements against the original wheel end.
Why Choose This Lippert Hub?
- Brake application: Manufacturer describes use with compatible electric or hydraulic drum brakes; match the complete wheel end before installation.
- Installed bearing kit: Supplied as the installed-bearing version, with races and wheel studs already fitted.
- Specified wheel interface: Eight on 275 mm bolt circle with M22 wheel studs, distinct from eight-on-6-1/2-inch hubs.
- Cast-iron construction: Heavy-duty hub body with corrosion-resistant zinc-plated wheel studs.
- Threaded cap interface: Accepts compatible Valcrum threaded dust caps; cap inclusion and exact cap identity are not established by the contents list.
Technical Specifications
- Manufacturer SKU: 2025048503
- Brand: Lippert
- Type: Standard threaded oil brake hub assembly with installed bearing kit
- Brake hub size: 12-1/4 inches
- Axle application rating: 16,000 lb; not a per-hub load rating
- Bolt pattern: 8 on 275 mm
- Stud size: M22
- Construction: Cast iron
- Pre-installed items: Bearing kit, races and zinc-plated wheel studs as described by manufacturer
- Package contents: Brake hub assembly and bearing kit
- UPC: 848150079398
- Country of origin: USA
- Warranty term: Limited 1 year on materials or workmanship defects per product page
- Unit of measure: EA
- Shipping dimensions: 17 x 15 x 15.5 inches; not installed hub dimensions
- Shipping weight: 142.8 lb as published by Lippert
Before You Order
Confirm the axle identification label, original hub number, brake diameter and width, bearing and seal numbers, spindle dimensions, wheel offset and pilot requirements, bolt circle and M22 fastener interface. The stated 16,000-lb application is an axle rating and does not establish a 16,000-lb load capacity for one hub. Eight studs alone do not identify the correct pattern. The product page does not name a specific complete axle SKU, bearing cross-reference set or vehicle fit list, so no universal or exact parent-axle fit is claimed.
Service Guide Scope
The linked Brake Hub Assemblies manual CCD-0011132 is a general aftermarket service reference. Its exploded-view quantities are illustrative and are not the contents of this eight-stud package. The bearing/seal manual CCD-0011255 likewise illustrates a general idler hub; it is not a parts list for this oil-brake-hub SKU. Have the installer follow instructions matched to the actual axle, lubrication system and wheel hardware. Do not transfer a grease-hub cap procedure to a threaded oil cap without confirming the correct procedure. Wheel torque depends on wheel and nut design as well as stud size; use the matched manufacturer requirements rather than selecting a torque solely because the studs are M22.
Compare the Correct Hub Configuration
The 16K brake hub with races and studs is a different supplied configuration. The 16K oil idler hub is for an idler application, not a substitute for the braking drum. Compare original part numbers and included components; matching bolt pattern alone does not establish interchangeability.
Manuals and Documents
| Manufacturer sku | 2025048503 |
|---|---|
| Brand | Lippert |
| Type | Standard threaded oil brake hub assembly with installed bearing kit |
| Brake hub size | 12-1/4 inches |
| Axle application rating | 16,000 lb; not a per-hub load rating |
| Bolt pattern | 8 on 275 mm |
| Stud size | M22 |
| Construction | Cast iron |
| Pre-installed items | Bearing kit, races and zinc-plated wheel studs as described by manufacturer |
| Package contents | Brake hub assembly and bearing kit |
| Upc | 848150079398 |
| Country of origin | USA |
| Warranty term | Limited 1 year on materials or workmanship defects per product page |
| Unit of measure | EA |
| Shipping dimensions | 17 x 15 x 15.5 inches; not installed hub dimensions |
| Shipping weight | 142.8 lb as published by Lippert |
- What comes in the package? The product page lists a brake hub assembly and bearing kit, with bearing races and zinc-plated wheel studs pre-installed. This is a brake hub, rather than an idler hub or a complete axle. A backing-plate brake assembly, wheel and tire are not listed as package contents. The page does not itemize bearing or seal numbers, or confirm that a threaded oil cap, lubricant, lug nuts and spindle hardware are included; verify those requirements against the original wheel end.
- Does this include a complete brake? The listed contents are the hub assembly and bearing kit. A backing-plate brake assembly is not listed.
- Does eight studs establish fit? No. Confirm the 275 mm bolt circle, M22 studs, bearings, seals, spindle and brake dimensions.
- Is 16,000 lb the capacity of one hub? No. The title identifies the axle application rating; do not use it as a per-hub capacity.
- Are the manuals exact parts lists? The linked Brake Hub Assemblies manual CCD-0011132 is a general aftermarket service reference. Its exploded-view quantities are illustrative and are not the contents of this eight-stud package. The bearing/seal manual CCD-0011255 likewise illustrates a general idler hub; it is not a parts list for this oil-brake-hub SKU. Have the installer follow instructions matched to the actual axle, lubrication system and wheel hardware. Do not transfer a grease-hub cap procedure to a threaded oil cap without confirming the correct procedure. Wheel torque depends on wheel and nut design as well as stud size; use the matched manufacturer requirements rather than selecting a torque solely because the studs are M22.
- Is the oil cap included? The page says the hub accepts Valcrum threaded dust caps but does not itemize a cap in the package contents. Confirm the correct cap and hardware before service.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.









