Solera Power Awning Speaker Idler Head Assembly, Black - 342150
Ready to order
Solera Power Awning Speaker Idler Head Assembly, Black - 342150
---
Solera Power Awning Speaker Idler Head Assembly, Black - 342150
Solera 342150 is the black speaker idler head assembly for the matching Solera power speaker awning. It replaces the idler-side head assembly to restore the campsite-facing speaker location while retaining the correct awning-head configuration.
Lippert lists an idler head assembly, speaker and grill in the contents, and its description identifies the front idler speaker head cover and back idler head cover. The matching Solera Power Speaker Drive head is required for the application and is not included. This is the idler side, not a complete awning or drive head.
Why Choose This Solera Speaker Idler Head?
- Speaker-head application: Quick facts identify use across Solera Power Speaker awning assemblies with flat, short and pitched configurations.
- Idler-side replacement: The specified side is Idler Head; match the original assembly rather than substituting a drive head.
- Listed contents: The manufacturer contents list names the idler head assembly, speaker and grill; front and back covers are described in the product text.
- Black exterior: The manufacturer photo shows a black cover with a round speaker grille and exposed mounting section.
- OEM references: Jayco 0306202 and Keystone RV 431253 are listed for cross-reference checking.
- Limited warranty: Lippert lists a one-year limited warranty under its terms.
Technical Specifications
- SKU: 342150
- Brand: Solera®
- Side: Idler Head
- Hardware Type: Cover
- Country of Origin: USA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Unit of Measure: EA
- Reference Vendor/Manufacturer Name: Lippert
- Jayco Part Number: 0306202
- Keystone RV Part Number: 431253
- UPC: 848150021342
- Shipping Dimensions: 12" L x 8.5" W x 8.5" H, 2.95 lbs.
Before You Order
Match part 342150, the original speaker-equipped idler head, cover shape, mounting arrangement and speaker-system identification. Check Jayco 0306202 or Keystone 431253 where applicable. Confirm the required drive-head configuration separately.
Which awnings does this speaker idler head fit?
Lippert quick facts say all Solera Power Speaker awning assemblies, including flat, short and pitched configurations. The longer description uses the broader phrase all Solera power awnings. Confirm the original speaker-head application and exact part identity; this listing does not extend that wording to every non-speaker, manual or newer-generation Solera head.
Is this a drive head or an idler head?
This is the idler head. The source says it should be used with a Solera Power Speaker Drive head, which is not included. Drive-side and idler-side parts have different roles and should not be substituted for one another.
What comes in the package?
The manufacturer contents list names Idler Head Assembly, Speaker and Grill. The description also identifies front idler speaker head and back idler head covers. Quantity is one assembly. A complete awning, drive head, controller, amplifier and separate wiring or hardware kit are not itemized as supplied.
Does the Hardware Type: Cover specification mean it is only an empty cover?
The specification table classifies the hardware type as Cover, while the product name and contents identify an idler head assembly with speaker and grill. Confirm that you need assembly 342150 rather than assuming a standalone empty front or rear cover is the same part.
Does it fit Regal speaker-head parts?
The focused page does not name a Regal replacement part, exact complete awning SKU, superseding number or generation change. Similar product names and related-product suggestions do not establish that a Regal assembly or cover is interchangeable with 342150.
What speaker ratings and connections are provided?
The focused source does not publish speaker wattage, impedance, amplifier requirements, connector identification, pinout or an environmental rating. Verify the existing speaker system and wiring rather than inferring ratings from the image.
Which OEM references should I compare?
Lippert lists Jayco part number 0306202, Keystone RV part number 431253 and UPC 848150021342. These identify the listed component; they do not establish universal compatibility with every Jayco or Keystone RV.
What are the dimensions and weight?
The published shipping package is 12 x 8.5 x 8.5 inches and 2.95 pounds. Those are package measurements and shipping weight, not installed head dimensions, shaft size or net assembly weight.
Are installation documents linked?
The focused page provides general support access but no exact SKU PDF. It describes replacing the old assembly and securing the replacement, without publishing a detailed service procedure, screw specification or torque. Use the service instructions for the exact awning and speaker configuration.
What origin and warranty are listed?
The specification table lists USA as the country of origin and a one-year warranty; the quick facts describe it as a one-year limited warranty. Confirm the manufacturer terms and original part match before ordering.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 342150 |
|---|---|
| Brand | Solera® |
| Side | Idler Head |
| Hardware type | Cover |
| Country of origin | USA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Unit of measure | EA |
| Reference vendor/manufacturer name | Lippert |
| Jayco part number | 0306202 |
| Keystone rv part number | 431253 |
| Upc | 848150021342 |
| Shipping dimensions | 12" L x 8.5" W x 8.5" H, 2.95 lbs. |
- Which awnings does this speaker idler head fit? Lippert quick facts say all Solera Power Speaker awning assemblies, including flat, short and pitched configurations. The longer description uses the broader phrase all Solera power awnings. Confirm the original speaker-head application and exact part identity; this listing does not extend that wording to every non-speaker, manual or newer-generation Solera head.
- Is this a drive head or an idler head? This is the idler head. The source says it should be used with a Solera Power Speaker Drive head, which is not included. Drive-side and idler-side parts have different roles and should not be substituted for one another.
- What comes in the package? The manufacturer contents list names Idler Head Assembly, Speaker and Grill. The description also identifies front idler speaker head and back idler head covers. Quantity is one assembly. A complete awning, drive head, controller, amplifier and separate wiring or hardware kit are not itemized as supplied.
- Does the hardware type: cover specification mean it is only an empty cover? The specification table classifies the hardware type as Cover, while the product name and contents identify an idler head assembly with speaker and grill. Confirm that you need assembly 342150 rather than assuming a standalone empty front or rear cover is the same part.
- Does it fit regal speaker-head parts? The focused page does not name a Regal replacement part, exact complete awning SKU, superseding number or generation change. Similar product names and related-product suggestions do not establish that a Regal assembly or cover is interchangeable with 342150.
- What speaker ratings and connections are provided? The focused source does not publish speaker wattage, impedance, amplifier requirements, connector identification, pinout or an environmental rating. Verify the existing speaker system and wiring rather than inferring ratings from the image.
- Which oem references should i compare? Lippert lists Jayco part number 0306202, Keystone RV part number 431253 and UPC 848150021342. These identify the listed component; they do not establish universal compatibility with every Jayco or Keystone RV.
- What are the dimensions and weight? The published shipping package is 12 x 8.5 x 8.5 inches and 2.95 pounds. Those are package measurements and shipping weight, not installed head dimensions, shaft size or net assembly weight.
- Are installation documents linked? The focused page provides general support access but no exact SKU PDF. It describes replacing the old assembly and securing the replacement, without publishing a detailed service procedure, screw specification or torque. Use the service instructions for the exact awning and speaker configuration.
- What origin and warranty are listed? The specification table lists USA as the country of origin and a one-year warranty; the quick facts describe it as a one-year limited warranty. Confirm the manufacturer terms and original part match before ordering.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


