MORryde CRE3-35 CRE3000 Triple 35″ Wheelbase -
Ready to order
MORryde CRE3-35 CRE3000 Triple 35″ Wheelbase -
---
Match the CRE3000 kit before ordering
CRE3-35 is the triple-axle CRE3000 kit for 35-inch wheelbase. Wheelbase means axle-center spacing; it is not the equalizer beam measurement. CRE2-1000 and CRE2-1475 both use 42-inch wheelbase but have 10-inch and 14.75-inch beams respectively.
MORryde lists four equalizers for a triple kit: two standard units and two with control-beam arms. Two tandem kits are not a substitute for a triple kit. A single-unit photograph is not the complete kit packing list. Separate wet bolts, shackles, crossmembers and other hardware are not established as included by the photographs.
Axle count and wheelbase alone do not approve installation. Check the manufacturer qualification guide for leaf-spring type, hanger geometry, frame-hanger spread, shackle length and loaded clearances. Correct Track applications also require the specified dial position and clearance checks. Use the current instructions and qualified suspension service; a sibling listing is an alternative configuration, not proof of interchangeability.
CRE3000 model and beam-width chart · CRE3000 qualification guide · Owner manual, version 19
MORryde RV suspension part CRE3-35 is for RV owners, mobile techs, and dealers who need to match a MORryde component by the real SKU instead of guessing from a generic photo. Use this listing to confirm part CRE3-35, review the visible specs, and choose the correct replacement or upgrade for the job.
This product solves the common RV-parts problem of finding the exact MORryde item without mixing it up with a similar-looking step, tray, suspension, pin-box, TV-mount, or accessory part. The trade-off is fitment: MORryde parts are often size-, rating-, side-, generation-, or application-specific, so confirm your original label, measurement, or documentation before ordering.
MORryde advertises up to 3 inches of suspension travel using rubber compression equalizers. Actual installation must satisfy the qualification and clearance requirements; this is not a guarantee of additional usable clearance or a cure for every ride problem. MORryde advertises the CRE3000 family for up to 8,000 lb GAWR per axle. This is not a trailer fit approval or permission to increase the axle, tire or trailer rating.
Features & Specifications
- CRE3-35 is the triple-axle CRE3000 kit for 35-inch wheelbase.
- MORryde specifies four equalizers for a triple kit: two standard and two with control-beam arms. Two tandem kits do not replace a triple kit.
- Rubber compression equalizers; advertised suspension travel up to 3 inches.
- Manufacturer family rating up to 8,000 lb GAWR per axle; existing trailer and axle ratings remain limiting.
- Installation requires the qualification guide and current instructions; axle count or appearance alone does not establish fit.
Why Choose CRE3-35?
This MORryde listing is built around part-number accuracy, practical RV use, and clear comparison against nearby options in the ERVP catalog. That matters because a similar title or product image does not guarantee the same dimensions, rating, attachment side, slide direction, or system generation.
Fitment limit: Match the exact kit and complete MORryde’s qualification guide for leaf-spring type, hanger geometry, frame-hanger spread, shackle length and loaded clearances. Wheelbase is axle-center spacing, not equalizer size. Correct Track requires the documented dial-position and clearance checks.
Compare MORryde RV Suspension Parts
These are separate catalog references, not a list of interchangeable parts. Use the exact CRE3000 model, axle configuration, wheelbase, beam reference and manufacturer qualification checks.
| Model / Part | Category | Best For | View Details |
|---|---|---|---|
| CRE3-35 | Triple CRE3000 kit | 35-inch wheelbase; full qualification required | Current Product |
| TG2-33 catalog reference | Separate MORryde listing | Exact application requires its own current manufacturer evidence; no CRE3000 replacement or service-part relationship is asserted. | View Details |
| TG2-35 catalog reference | Separate MORryde listing | Exact application requires its own current manufacturer evidence; no CRE3000 replacement or service-part relationship is asserted. | View Details |
| CRE2-1475 | Tandem CRE3000 kit | 42-inch wheelbase; 14.75-inch beam reference; full qualification required | View Details |
Tip: MORryde part numbers are specific. Check the SKU and the physical measurement, rating, side, generation, or application on your RV before choosing between similar listings.
Technical Specifications
| Brand | MORryde |
| SKU | CRE3-35 |
| Part Number | CRE3-35 |
| Product Family | MORryde RV Suspension Parts |
| Existing catalog shipping weight reference | 35 lb — not independently verified as net kit weight |
| Product Type | RV Suspension |
Physical equalizer dimensions, mounting-hole geometry and net kit weight are not established by the retained shipping entries. Use the qualification guide and exact model evidence; do not treat catalog package measurements as installed dimensions.
What's Included
MORryde specifies four equalizers for a triple kit: two standard and two with control-beam arms. Two tandem kits do not replace a triple kit. A single-equalizer photo is not the full packing list. Separate wet bolts, shackles, crossmembers and loose hardware are not established as included or excluded by the cited photos; confirm the exact supplied kit contents.
Compatible Models & Alternatives
Use the completed kit selector to compare exact CRE3000 configurations. Its options are not interchangeable. Other linked MORryde listings are reference-only; verify their separate application. Co-purchase or a shared brand does not establish fit.
Frequently Asked Questions
- How do I confirm this is the right MORryde part?
- CRE3-35 is the triple-axle CRE3000 kit for 35-inch wheelbase. Match the exact kit and complete MORryde’s qualification guide for leaf-spring type, hanger geometry, frame-hanger spread, shackle length and loaded clearances. Wheelbase is axle-center spacing, not equalizer size. Correct Track requires the documented dial-position and clearance checks.
- What should I measure before ordering?
- Match the exact kit and complete MORryde’s qualification guide for leaf-spring type, hanger geometry, frame-hanger spread, shackle length and loaded clearances. Wheelbase is axle-center spacing, not equalizer size. Correct Track requires the documented dial-position and clearance checks.
- Can I substitute a similar MORryde product?
- A shared brand, axle count or wheelbase does not establish interchangeability. The two 42-inch tandem kits have different beam references: CRE2-1000 is 10 inches and CRE2-1475 is 14.75 inches. Match the exact model and qualification requirements.
- What do buyers usually pair with this part?
- A sales pairing is not compatibility evidence. Select any wet-bolt or shackle kit only after checking the exact suspension, shackle length, hanger type and axle count against its own manufacturer instructions.
Why Buy from Elkhart RV Parts?
Elkhart RV Parts focuses on hard-to-find RV service parts with clear part-number identification, practical fitment notes, and fast support from a team located in Elkhart, Indiana.
| Manufacturer part number | CRE3-35 |
|---|---|
| Axle configuration | Triple |
| Wheelbase (axle-center spacing) | 35 inches |
| Equalizer quantity stated by manufacturer | 4 for triple kit: 2 standard and 2 with control-beam arms |
| Advertised suspension travel | Up to 3 inches; qualification and clearances required |
| Advertised maximum axle rating | Up to 8,000 lb GAWR per axle; not a rating increase or fit approval |
| Installation qualification | Current manufacturer spring, hanger, shackle and loaded-clearance checks required |
| Physical dimensions / net weight | Not verified from the existing catalog shipping references |
| Warranty reference | Manufacturer advertises a two-year term; current terms and eligibility apply |
- What type of vehicle is the morryde cre3-35 suspension upgrade designed for? CRE3-35 is the triple-axle CRE3000 kit for 35-inch wheelbase. It is a trailer suspension system, not an automatic fit for every fifth wheel or travel trailer. Match the exact kit and complete MORryde’s qualification guide for leaf-spring type, hanger geometry, frame-hanger spread, shackle length and loaded clearances. Wheelbase is axle-center spacing, not equalizer size. Correct Track requires the documented dial-position and clearance checks.
- How much suspension travel does the morryde cre3-35 provide? MORryde advertises up to 3 inches of suspension travel using rubber compression equalizers. Actual installation must satisfy the qualification and clearance requirements; this is not a guarantee of additional usable clearance or a cure for every ride problem.
- What are the benefits of installing the morryde cre3-35 suspension system? MORryde provides bolt-on installation instructions, but that does not establish a universal DIY repair. Use qualified suspension service and the current manual for lifting/support, mounting, hardware-specific torque, loaded clearance and Correct Track restrictions.
- Is the morryde cre3-35 easy to install? MORryde provides bolt-on installation instructions, but that does not establish a universal DIY repair. Use qualified suspension service and the current manual for lifting/support, mounting, hardware-specific torque, loaded clearance and Correct Track restrictions.
- What is the weight capacity of the morryde cre3-35 suspension system? MORryde advertises the CRE3000 family for up to 8,000 lb GAWR per axle. This is not a trailer fit approval or permission to increase the axle, tire or trailer rating.
- Are the two 42-inch cre3000 kits interchangeable? CRE2-1000 and CRE2-1475 both use a 42-inch wheelbase, but the manufacturer chart identifies 10-inch and 14.75-inch beams respectively. Check the exact measurement points and complete qualification guide; wheelbase alone does not select the kit.
- Are the catalog dimensions and weight installed equalizer measurements? The cited model chart, qualification guide and owner manual do not verify the existing catalog package entries as the physical equalizer envelope or net kit weight. Native shipping entries are retained as catalog references. Confirm exact geometry and contents before using them for installation planning.
Product Documents & Manuals
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.



