Lippert Wire Harness for 10665 Slide-Out Controller - 135696
Ready to order
Lippert Wire Harness for 10665 Slide-Out Controller - 135696
---
Lippert Controller Wire Harness 135696
Replace the matching wiring harness for a Lippert 10665 slide-out controller with part 135696. Lippert identifies 10665 as this harness manufacturer reference, and its electric through-frame component sheet lists the harness alongside controller 135666. Confirm the controller identification and connector arrangement on your installed system before ordering.
This listing supplies one replacement wire harness. The controller, motor, switch, installation tools and complete slide-out assembly are not included. The original manufacturer photo shows a white connector with multicolored wires; it is a product view rather than a wiring diagram.
Why Choose This Exact Harness?
- Exact harness identity: Lippert replacement part 135696
- Controller reference: manufacturer number 10665
- One replacement harness; controller sold separately
- Documented component: CCD-0002560 page 8, callout AU
- Original photo: white connector with multicolored wires
- USA origin and one-year warranty term listed by Lippert
Technical Specifications
- SKU: 135696
- Brand: Lippert
- Hardware Type: Wire Harness
- Country of Origin: USA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Unit of Measure: EA
- Manufacturer Reference Number: 10665
- Reference Vendor/Manufacturer Name: Lippert
- UPC: 848150060396
- Shipping Dimensions: 8" L x 2" W x 0.25" H, 0.13 lbs.
- Documented Component: CCD-0002560 page 8, callout AU
- Controller Reference: 10665 (controller sold separately as Lippert 135666)
- Included Component: One wire harness
Before You Order
Check the 10665 reference on the installed controller and match Lippert harness number 135696 with your system parts information. The 2x2 Electric Through Frame Slide-Out Components sheet identifies wire harness 135696 at callout AU and controller 135666 at callout AT on page 8. This supports component identification, not universal fit across every Lippert controller or RV.
Compare the connector shape, keying, latch arrangement and original wiring configuration. Lippert does not publish an overall harness length, wire gauge, electrical rating, pin assignment or wiring-color function on this product page. Do not assign electrical functions from wire colors in the photo.
Controller and Harness Comparison
The 10665 slide-out controller 135666 is sold separately; its own manufacturer page says a wire harness is required and not included. The 5-foot interconnect harness 241834 is a different, male-to-female motor harness for in-wall slide-outs. It is shown for comparison and is not established as a substitute for 135696.
Manuals and Documents
The 2x2 Electric Through Frame Slide-Out Components sheet, revision March 5, 2026, identifies the harness on page 8 at callout AU. The product support link itself opens the general Lippert support homepage. The component sheet is an identification reference, not a complete wiring or installation procedure.
Use the installed system service instructions for electrical isolation, connection and testing. Confirm the original wiring arrangement before disconnecting components; do not infer a pinout or required electrical settings from this listing.
Shipping Measurements
Lippert publishes an 8 x 2 x 0.25-inch shipping package and a shipping weight of 0.13 lb. These packed measurements do not establish harness length or connector dimensions.
California Proposition 65 Warning
WARNING: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 135696 |
|---|---|
| Brand | Lippert |
| Hardware type | Wire Harness |
| Country of origin | USA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Unit of measure | EA |
| Manufacturer reference number | 10665 |
| Reference vendor/manufacturer name | Lippert |
| Upc | 848150060396 |
| Shipping dimensions | 8" L x 2" W x 0.25" H, 0.13 lbs. |
| Documented component | CCD-0002560 page 8, callout AU |
| Controller reference | 10665 (controller sold separately as Lippert 135666) |
| Included component | One wire harness |
- What is included? One replacement wire harness. The controller, motor and switch are sold separately.
- Which controller reference is listed? Lippert gives manufacturer reference 10665. The separate controller 135666 uses the same 10665 reference; both appear on CCD-0002560 page 8.
- Where is it in the component sheet? CCD-0002560 page 8, callout AU identifies wire harness 135696. Controller135666 is callout AT.
- Is the harness length published? No overall harness length is given. The 8-inch shipping-box length is not a harness-length specification.
- Can wire colors be used as a pinout? No. The product photo does not establish wiring functions, electrical ratings or pin assignments. Use the installed system wiring instructions.
- Is 241834 interchangeable? No interchangeability is established. 241834 is a five-foot male-to-female motor interconnect for in-wall slide-outs.
- Is this for every lippert controller? No universal fitment is established. Match 10665/135696 and the original connector arrangement in your system documentation.
- What shipping data and warranty are listed? Packed size 8 x 2 x 0.25 inches, shipping weight 0.13 lb, USA origin and one-year warranty term.
Compatible With
Fitment and included components
- Lippert RV Slide-Out Controller #10665: Harness135696 ownPDP manufacturer reference10665;controller135666 ownPDP same10665 and requires harness soldseparately. CCD-0002560p8 AU135696/AT135666 visuallyreviewed. Confirm installed system;no universal fitment.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


