Lippert Stop Block with Set Screw for Above-Floor Slides - 124188
Ready to order
Lippert Stop Block with Set Screw for Above-Floor Slides - 124188
---
Lippert 124188 Above-Floor Slide-Out Stop Block
Lippert 124188 is a replacement stop block with set screw for single- and dual-rail above-floor slide-out systems. It acts as a clamp-on hard stop at the slide mechanism’s travel limits, helping prevent the interior trim or exterior flange from taking the stopping load. Lippert technical sheet TI-157 identifies this exact part in the above-floor mechanism.
One stop-block assembly is supplied per package. The product photo shows a notched block with a socket set screw, and the double-rail components sheet names 124188 “Stop Block with Set Screw.” A complete slide system, motor, rail, crown gear and installation tools are not listed as included.
Why Choose This Stop Block?
- Documented identity: Lippert 124188, with Jayco reference 0242274 and Keystone RV reference 371728.
- Above-floor application: source page specifies single- and dual-rail above-floor slide systems.
- Clamp-on design: TI-157 describes an aluminum block notched to fit over the ear of the hat channel or arm and secured by a set screw.
- Travel-stop function: gives the applicable mechanism a hard stop rather than using trim or slide flanges as stops.
- Single replacement assembly: one stop block with set screw; match the existing mechanism and required quantity.
Technical Specifications
- SKU: 124188
- Brand: Lippert
- Hardware Type: Jig/Stop
- Quantity In Package: 1
- Warranty Term: 1 Year
- Country of Origin: USA
- Unit of Measure: EA
- Reference Vendor/Manufacturer Name: Lippert
- Jayco Part Number: 0242274
- Keystone RV Part Number: 371728
- UPC: 848150060419
- Shipping Dimensions: 1.25" L x 0.8" W x 0.8" H, 0.15 lbs.
- Application: Single/dual-rail above-floor slide systems
- Assembly: Notched aluminum block with set screw (TI-157)
- Double-rail diagram: CCD-0003650, page 1, callout D
- Single-rail diagram: CCD-0003648, page 3, callout Q
- Installation reference: TI-157 / CCD-0002054
- Bare-part dimensions / set-screw size: Not specified on product page
Before You Order
Confirm the slide system is the single- or dual-rail above-floor type covered by Lippert’s page and diagrams. Match SKU 124188 or the stated OEM reference, notch profile, hat-channel or arm interface and original hardware. Jayco 0242274 and Keystone 371728 are part references, not a list of all compatible coach models or years. This is not a universal stop for in-wall, through-frame or other slide designs.
How the Stop Block Works
The hard stop allows the applicable motor clutch or control box to respond when travel stops. It is not a motor, brake, electronic limit switch or controller. Replacing the block alone does not establish that another slide-out fault has been diagnosed or repaired.
Installation and Adjustment References
TI-157 describes placing the block over the ear of the hat channel or arm at the extend and retract stop locations, setting the stops when the slide seal is made, and tightening the set screw with a hex wrench. The sheet identifies 124188 in its illustration. It does not provide a numeric set-screw torque, screw thread size or a dimensioned notch drawing. Use the complete sheet and the identified system’s instructions for the actual adjustment; do not guess a torque or transfer settings from another mechanism.
- Above-Floor Double-Rail Components — Page 1, Callout D
- Above-Floor Single-Rail Components — Page 3, Callout Q
- TI-157 Above-Floor Slide-Out Hard Stops
The diagrams identify the part within the above-floor system family. They do not establish a specific complete slide assembly or coach model for every installation. No superseded part number is stated on the product page.
Shipping Measurements
Lippert publishes shipping dimensions of 1.25 x 0.8 x 0.8 inches and a shipping weight of 0.15 lb. These are package data, not a dimensioned drawing of the block, notch, screw or clamp interface. Exact bare-part measurements are not supplied on the reviewed product page.
Related Slide-Out Parts
For other above-floor service parts, see the 26-tooth crown gear 116658, shown separately in the component diagram. For comparison with another stop design, see stop-can assembly 122840. Neither part is included or a documented substitute for stop block 124188; select by the correct mechanism and exact part reference.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 124188 |
|---|---|
| Brand | Lippert |
| Hardware type | Jig/Stop |
| Quantity in package | 1 |
| Warranty term | 1 Year |
| Country of origin | USA |
| Unit of measure | EA |
| Reference vendor/manufacturer name | Lippert |
| Jayco part number | 0242274 |
| Keystone rv part number | 371728 |
| Upc | 848150060419 |
| Shipping dimensions | 1.25" L x 0.8" W x 0.8" H, 0.15 lbs. |
| Application | Single/dual-rail above-floor slide systems |
| Assembly | Notched aluminum block with set screw (TI-157) |
| Double-rail diagram | CCD-0003650, page 1, callout D |
| Single-rail diagram | CCD-0003648, page 3, callout Q |
| Installation reference | TI-157 / CCD-0002054 |
| Bare-part dimensions / set-screw size | Not specified on product page |
- What is included? One stop-block assembly is supplied per package. The product photo shows a notched block with a socket set screw, and the double-rail components sheet names 124188 “Stop Block with Set Screw.” A complete slide system, motor, rail, crown gear and installation tools are not listed as included.
- Which slide systems does it fit? Confirm the slide system is the single- or dual-rail above-floor type covered by Lippert’s page and diagrams. Match SKU 124188 or the stated OEM reference, notch profile, hat-channel or arm interface and original hardware. Jayco 0242274 and Keystone 371728 are part references, not a list of all compatible coach models or years. This is not a universal stop for in-wall, through-frame or other slide designs.
- How does the stop block work? The hard stop allows the applicable motor clutch or control box to respond when travel stops. It is not a motor, brake, electronic limit switch or controller. Replacing the block alone does not establish that another slide-out fault has been diagnosed or repaired.
- Where does it attach and how is it adjusted? TI-157 describes placing the block over the ear of the hat channel or arm at the extend and retract stop locations, setting the stops when the slide seal is made, and tightening the set screw with a hex wrench. The sheet identifies 124188 in its illustration. It does not provide a numeric set-screw torque, screw thread size or a dimensioned notch drawing. Use the complete sheet and the identified system’s instructions for the actual adjustment; do not guess a torque or transfer settings from another mechanism.
- What are jayco 0242274 and keystone 371728? They are the OEM part references Lippert lists for stop block124188. Confirm the original part and mechanism; they do not identify all compatible coach models or years.
- Are the shipping measurements the block dimensions? Lippert publishes shipping dimensions of 1.25 x 0.8 x 0.8 inches and a shipping weight of 0.15 lb. These are package data, not a dimensioned drawing of the block, notch, screw or clamp interface. Exact bare-part measurements are not supplied on the reviewed product page.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


