Lippert Small Hydraulic Slide Front Cylinder Bracket - 113535
Ready to order
Lippert Small Hydraulic Slide Front Cylinder Bracket - 113535
---
Small Hydraulic Slide-Out Front Cylinder Bracket - 113535
Lippert 113535 is the small replacement front cylinder bracket for the manufacturer’s 2 x 2 and 2.5 x 2.5 hydraulic slide systems. The product title identifies a 2-1/2-inch length. Use the original slide-system identification and bracket geometry to confirm the replacement before ordering.
This listing is for one bracket. A hydraulic cylinder, slide mechanism, mounting bolts, pins and other installation hardware are not identified as included. The manufacturer illustration shows a bent bracket with a circular opening in the upright section; it does not establish hole diameter or fastener specifications.
Why Choose This Cylinder Bracket?
- Front cylinder application: intended for the hydraulic slide-system position named by Lippert.
- Small size designation: the title specifies a 2-1/2-inch-long bracket.
- Manufacturer-stated systems: 2 x 2 and 2.5 x 2.5 hydraulic slide systems.
- Keystone reference: 321107 is listed for identification and original-part comparison.
- Single replacement bracket: package quantity one, rather than a cylinder or complete slide-out assembly.
Technical Specifications
- SKU: 113535
- Brand: Lippert
- Hardware Type: Bracket/Brace
- Quantity In Package: 1
- Warranty Term: 1 Year
- Country of Origin: USA
- Unit of Measure: EA
- Keystone RV Part Number: 321107
- Shipping Dimensions: 2.5" L x 2.5" W x 1.5" H, 1 lbs.
- Application: Front cylinder bracket for 2 x 2 and 2.5 x 2.5 hydraulic slide systems, as stated by Lippert
- Size designation: Small, 2-1/2-inch length in product title
- Mounting details: Hole diameter, center location, material and attachment procedure not specified
- Shipping versus part dimensions: 2.5 x 2.5 x 1.5 inches,1lb is the published shipping package;not a complete bracket drawing
Before You Order
Confirm Lippert SKU 113535 and, where applicable, Keystone reference 321107 against the original equipment. Compare the bracket shape, bend, mounting-hole diameter and position, cylinder interface and attachment arrangement. The page does not define what the 2 x 2 and 2.5 x 2.5 system numbers measure, so they must not be treated as this bracket’s footprint or hole spacing. No exact cylinder SKU, coach model or universal fit list is supplied.
Part Size and Shipping Measurements
The 2-1/2-inch length is the title’s part-size designation. The Specifications panel separately lists shipping dimensions of 2.5 x 2.5 x 1.5 inches and a shipping weight of 1 pound. That package information is not a dimensioned bracket drawing and does not verify the upright height, plate thickness, mounting-hole bore or net part weight.
Installation and Source Limits
The linked manufacturer support page is a general resource directory, not an installation document specific to 113535. No torque, welding instruction, pin selection or fastener size is established by the focused product page. Obtain the instructions for the installed hydraulic slide system and confirm the mounting method with Lippert before repair. The source lists a one-year warranty term and Country of Origin: USA. No superseded part number is stated.
Related Slide-Out Components
Compare the Lippert 354183 hydraulic slide cylinder as a separate component listing. This source does not verify that cylinder as the parent for 113535.
The Lippert 122852 electric-slide front actuator bracket serves a separately described electric application. It is not an established substitute for this hydraulic front cylinder bracket.
| Sku | 113535 |
|---|---|
| Brand | Lippert |
| Hardware type | Bracket/Brace |
| Quantity in package | 1 |
| Warranty term | 1 Year |
| Country of origin | USA |
| Unit of measure | EA |
| Keystone rv part number | 321107 |
| Shipping dimensions | 2.5" L x 2.5" W x 1.5" H, 1 lbs. |
| Application | Front cylinder bracket for 2 x 2 and 2.5 x 2.5 hydraulic slide systems, as stated by Lippert |
| Size designation | Small, 2-1/2-inch length in product title |
| Mounting details | Hole diameter, center location, material and attachment procedure not specified |
| Shipping versus part dimensions | 2.5 x 2.5 x 1.5 inches,1lb is the published shipping package;not a complete bracket drawing |
- What does this listing include? This listing is for one bracket. A hydraulic cylinder, slide mechanism, mounting bolts, pins and other installation hardware are not identified as included. The manufacturer illustration shows a bent bracket with a circular opening in the upright section; it does not establish hole diameter or fastener specifications.
- Which hydraulic slide systems are named? Lippert states 2 x 2 and 2.5 x 2.5 hydraulic slide systems. These are source system descriptions; the page does not define their measurement reference or list exact parent model numbers.
- What is the keystone part reference? Lippert lists Keystone RV Part Number321107 for this bracket. Match the original part and mounting geometry rather than assuming every Keystone model uses it.
- Are the shipping dimensions the bracket dimensions? The 2-1/2-inch length is the title’s part-size designation. The Specifications panel separately lists shipping dimensions of 2.5 x 2.5 x 1.5 inches and a shipping weight of 1 pound. That package information is not a dimensioned bracket drawing and does not verify the upright height, plate thickness, mounting-hole bore or net part weight.
- What mounting bolts or installation torque should i use? The linked manufacturer support page is a general resource directory, not an installation document specific to 113535. No torque, welding instruction, pin selection or fastener size is established by the focused product page. Obtain the instructions for the installed hydraulic slide system and confirm the mounting method with Lippert before repair. The source lists a one-year warranty term and Country of Origin: USA. No superseded part number is stated.
- Is this the same as an electric slide-out actuator bracket? This part is described for a hydraulic slide front cylinder. An electric actuator bracket is a separately identified application; no interchangeability is established.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


