Lippert RV Entry Door Camber Adjustment Tool - 2023002404
Ready to order
Lippert RV Entry Door Camber Adjustment Tool - 2023002404
---
Lippert RV Entry Door Camber Adjustment Tool - 2023002404
Lippert 2023002404 is an RV entry-door camber adjustment tool for correcting the bow of an appropriate door. Correct camber helps the top and bottom corners meet the frame before the center, putting pressure on the seal and improving latch and opening/closing behavior. It is an alignment service tool rather than a replacement door or latch.
One adjustment tool is listed. The gallery shows its long bar, end contact legs, pressure-adjustment screw, lever and handwheel. The door, seals, latch, installation supplies and any straightedge used to assess camber are not itemized as included. Do not use this tool on Lippert G Series doors with glass paneling: Lippert warns that it can damage the glass.
Why Choose This Part?
- Purpose: Adjust entry-door camber to address suitable alignment problems.
- Sealing: Correct bow helps the door press against its existing seal.
- Operation: May improve opening, closing and latch behavior when camber is the cause.
- Adjustment: Pressure screw and contact legs shown in the product gallery.
- Exclusion: Not for Lippert G Series glass-panel doors.
Technical Specifications
- SKU: 2023002404
- Brand: Lippert
- Warranty Term: 1 Year
- Country of Origin: USA
- Quantity In Package: 1
- Unit of Measure: EA
- Shipping Dimensions: 44" L x 8.5" W x 5" H, 10 lbs.
Before You Order
Identify the door construction before applying pressure. Lippert expressly excludes G Series doors with glass paneling; do not infer suitability for other glass-panel doors without their manufacturer’s instructions. Diagnose camber independently of hinge, frame, latch and seal damage, and compare the door to a straightedge before adjusting. The tool is not a guarantee that every difficult-to-close door can be repaired without replacement.
Installation and Reference Notes
The product page describes excessive positive camber as a gap greater than 1/4 inch, minimal or no camber as less than 1/8 inch or a flat door, and negative camber as the top and bottom corners projecting away from a straightedge. These are the source’s diagnostic scenarios, not a universal target specification. To introduce positive camber, its instructions place the contact legs on the door exterior near the latch and apply pressure gradually; to reduce excessive positive camber, it describes reversing the tool to the interior. Make small changes and remeasure between adjustments to limit component stress. Use the full manufacturer instructions and the door-specific service procedure; no fixed pressure, turn count or force rating is supplied. The linked support resource is a video, not a SKU-specific PDF.
Published shipping reference: 44" L x 8.5" W x 5" H, 10 lbs.. These are transport data, not installed dimensions.
Related Parts
Browse related RV parts and tools. Select each item by its own verified application.
| Sku | 2023002404 |
|---|---|
| Brand | Lippert |
| Warranty term | 1 Year |
| Country of origin | USA |
| Quantity in package | 1 |
| Unit of measure | EA |
| Shipping dimensions | 44" L x 8.5" W x 5" H, 10 lbs. |
- Can it be used on g series glass-panel doors? No. Lippert expressly warns against that use because the glass panel may be damaged.
- Does it replace a door or latch? No. It is a camber adjustment service tool; the door, latch and seal are separate components.
- What does positive camber do? Lippert describes the top and bottom corners contacting the frame before the center, creating pressure against the seal.
- Should i use a fixed number of turns? No fixed turn count or force is supplied. The source calls for gradual small adjustments and repeated measurements.
- Is 44 inches the tool’s installed length? The page states 44 x 8.5 x 5 inches and 10 pounds as shipping data. It does not provide a separate item-length drawing.
- Will it fix every door that will not latch? No. Verify that camber is the issue and check the door’s construction and service instructions before use.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.











