Lippert Quick-Release Landing Gear Pull Pin 119113 - Single

Lippert Quick-Release Pull Pin 119113 for Landing Gear

Lippert 119113 is a spring-loaded, bolt-on pull pin for adjusting a fifth-wheel trailer's landing-gear drop leg. Pulling the handle releases the pin so the inner leg can move; the spring returns the pin toward its engaged position when the handle is released. Confirm that the pin fully engages the correct hole before the landing gear carries a load or the trailer is moved.

This listing is for one pull-pin assembly. Lippert identifies the package quantity as one each. A complete landing-gear leg, footpad or leveling system is not the listed product. If you need two pins, compare the separately listed Lippert 308287 two-pack and verify the required assembly before choosing a package.

Why Choose This Pull Pin?

• Spring-loaded operation: A pull-and-release handle makes drop-leg adjustment less cumbersome than removing a loose standard hair pin.
• Bolt-on mounting: Lippert specifies a one-time attachment without welding.
• Published pin size: The pin diameter is 3/8 inch and Lippert specifies a 7/16-inch receiving hole.
• Zinc-plated finish: The manufacturer identifies a bright zinc-plated finish.

Technical Specifications

• Lippert part number: 119113
• Package quantity: one each
• Hardware type: pin
• Pin diameter: 3/8 inch; stated hole size: 7/16 inch
• Shipping package: 8.5 x 3.25 x 1.14 inches; shipping weight: 0.81 lb
• OEM references: Forest River 1051532; Heartland 14217; Jayco 0192209; Keystone RV 253163; Winnebago 201499-01-000

Before You Order

Match the original Lippert part number, mounting arrangement and receiving-hole size. The shipping dimensions describe the package and are not a mounting template. The current product page describes broad jack use, but that wording does not establish that every landing-gear generation accepts this part. Manufacturer component sheets identify 119113 in electric landing-gear, Ground Control 2.0, Ground Control LCD and OneControl families; confirm your exact assembly before selecting the replacement.

Support the trailer according to the manufacturer's instructions before servicing its landing gear. Do not use a leveling system alone to support under-trailer service. See Lippert electric landing-gear support for the relevant manufacturer documents. Exact applications beyond the documented kits remain under evidence review.

Documented Ground Control Replacement Applications

Lippert’s Ground Control LCD aftermarket manual CCD-0011144 (revision November 12, 2026; for systems installed after April 2021) lists 119113 as callout P on page 5. Both kit 358590 and kit 675817 include two of these pull pins. This single-pin listing serves replacement or repair needs; a new complete kit already contains the two pins, so an extra pin purchase is not required solely to install that kit.

See the 358590 four-point system or 675817 six-point system for the complete assembly. This source does not establish universal fit across every jack, short-leg kit or travel-trailer system.