Lippert J-1 RV Slide-Out Service Roller Assembly - 115611
Ready to order
Lippert J-1 RV Slide-Out Service Roller Assembly - 115611
---
J-1 RV Slide-Out Service Roller - 115611
Lippert 115611 is the J-1 replacement service roller assembly for compatible Lippert RV slide-outs. Its nylon roller is mounted to a steel base and supports the slide-out’s rolling movement during extension and retraction. Match the original roller assembly and consult your RV’s system manual before ordering; the J-1 designation does not establish fit to every Lippert slide-out.
One assembly is supplied, consisting of the roller, base, shaft and two push nuts. Mounting screws, a complete slide-out mechanism and additional roller assemblies are not listed as included. The slotted mounting base permits placement adjustment, but the correct mounting position and number of rollers depend on the installed system. Lippert recommends professional installation assistance from the original RV manufacturer.
Why Choose This Service Roller?
- Nylon roller and steel base: the manufacturer identifies both materials for the service assembly.
- Slotted mounting holes: elongated holes allow positioning to match the installed roller location.
- One complete roller assembly: roller, base, shaft and two push nuts are named in Quick Facts.
- Product measurements available: 1.448-inch base-to-roller-top height and 4.147-inch width aid comparison.
- J-1 identification: use Lippert SKU 115611 and the original system manual to select the replacement.
Technical Specifications
- SKU: 115611
- Brand: Lippert
- Hardware Type: Roller
- Country of Origin: USA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Unit of Measure: EA
- Reference Vendor/Manufacturer Name: Lippert
- UPC: 848150030085
- Shipping Dimensions: 6" L x 4" W x 4" H, 1.05 lbs.
- Service designation: J-1
- Materials: Nylon roller; steel mounting plate
- Contents: One roller assembly: roller, base, shaft and two push nuts
- Height: 1.448 inches, bottom of base to top of roller
- Width: 4.147 inches, manufacturer Quick Facts / approximate dimension graphic
- Roller size: 1 x 3-3/4 inches, manufacturer Quick Facts
- Approximate graphic side dimensions: 2.70-inch horizontal and 1.37-inch vertical side-view callouts; use the shown reference points
- Mounting: Elongated screw holes; fastener sizes and slot spacing not supplied
- Installation: Professional assistance from the original RV manufacturer recommended
- Load rating: Not supplied on the focused product page
Before You Order
Compare the original roller’s mounting base, hole arrangement, roller size and installed height. Lippert identifies a 1.448-inch height from the bottom of the base to the top of the roller, a 4.147-inch width and a 1 x 3-3/4-inch roller in Quick Facts. The approximate dimension graphic additionally marks a 2.70-inch horizontal and 1.37-inch vertical side-view span; refer to its depicted reference points. Those callouts are not all overall dimensions.
The 6 x 4 x 4-inch, 1.05-lb figures describe shipping. No exact parent unit list, numerical load rating, mounting screw size, slot spacing or torque is supplied. Lippert gives no additional OEM cross-reference or superseded SKU on this page. Consult the installed system manual and original RV manufacturer before purchasing or adjusting the assembly.
Installation and Gallery Notes
Lippert recommends professional installation assistance from the original RV manufacturer. Multiple rollers may be used in a slide-out, but this package contains only one assembly; the listing does not specify a universal roller count or placement. RV exterior photos and feature graphics are representative illustrations, not proof of fit to the pictured RV or additional included products.
Other Service Rollers to Compare
The J-32 roller 249845 and J-38 roller 320500 are different service parts. Compare exact geometry and system identification; similar names do not make them interchangeable with this J-1 assembly.
| Sku | 115611 |
|---|---|
| Brand | Lippert |
| Hardware type | Roller |
| Country of origin | USA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Unit of measure | EA |
| Reference vendor/manufacturer name | Lippert |
| Upc | 848150030085 |
| Shipping dimensions | 6" L x 4" W x 4" H, 1.05 lbs. |
| Service designation | J-1 |
| Materials | Nylon roller; steel mounting plate |
| Contents | One roller assembly: roller, base, shaft and two push nuts |
| Height | 1.448 inches, bottom of base to top of roller |
| Width | 4.147 inches, manufacturer Quick Facts / approximate dimension graphic |
| Roller size | 1 x 3-3/4 inches, manufacturer Quick Facts |
| Approximate graphic side dimensions | 2.70-inch horizontal and 1.37-inch vertical side-view callouts; use the shown reference points |
| Mounting | Elongated screw holes; fastener sizes and slot spacing not supplied |
| Installation | Professional assistance from the original RV manufacturer recommended |
| Load rating | Not supplied on the focused product page |
- Which slide-out systems does the j-1 fit? Lippert says it is compatible with multiple Lippert slide-out systems but provides no exact parent model or serial-number chart on the focused page. Match the original J-1 assembly, mounting arrangement and dimensions with your RV manual before ordering.
- What comes in one package? One roller assembly, with a roller, base, shaft and two push nuts. Mounting screws, additional assemblies and a complete slide-out mechanism are not listed as included.
- What are its product dimensions? Quick Facts states 1.448 inches from the bottom of the base to the top of the roller, 4.147 inches wide, and a 1 x 3-3/4-inch roller. The approximate dimension graphic also shows 2.70-inch horizontal and 1.37-inch vertical side-view callouts; compare the reference points in that graphic rather than treating every callout as the overall assembly size.
- Is the 6 x 4 x 4-inch measurement the roller size? No. Those are the shipping-box dimensions, with a shipping weight of 1.05 lb. They are separate from the assembly and roller measurements.
- Can i choose a different j-number roller as a substitute? Not from the J-number or similar appearance alone. The linked J-32 and J-38 rollers are different service parts. Match the installed assembly and system instructions; no interchangeability is established here.
- Are mounting screw sizes and a load rating supplied? The focused page does not state screw size, slot spacing, mounting torque or a numerical load rating. Confirm them with the original RV manufacturer or the correct system manual.
- Who should install it? Lippert recommends professional assistance from the original RV manufacturer. The correct mounting location and number of rollers are system-specific; this listing does not provide a universal installation or adjustment procedure.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.










