Lippert In-Wall IG-42 5mm Slide-Out Motor Assembly - 240015
Ready to order
Lippert In-Wall IG-42 5mm Slide-Out Motor Assembly - 240015
---
Lippert In-Wall IG-42 5mm Slide-Out Motor Assembly - 240015
Lippert 240015 is the IG-42, 5 mm replacement motor assembly listed for various Lippert In-Wall RV slide-outs. It replaces a matching motor component in an existing slide-out drive system. Confirm the original motor identification, mechanical interface and controller requirements before ordering; the In-Wall name alone does not establish an exact match.
Lippert describes this as an exact-match component supplied as an assembled motor, with no motor assembly required. The listing quantity is one. A controller, wiring harness, coupler, H-column, mounting kit and complete slide-out mechanism are not itemized as included. The RV and slide-room photographs illustrate the application and do not establish fit to those particular vehicles.
Why Choose This Matching Motor Assembly?
- Specific replacement identity: Lippert SKU 240015, IG-42 with the manufacturer's 5 mm designation.
- In-Wall application: intended for a matching Lippert In-Wall slide-out; verify the original system documentation.
- Assembled component: manufacturer states no motor assembly is needed; installation and system checks are still required.
- Measured reference graphic: approximately 5.83 inches overall, 4.49 inches across the illustrated body span and 1.77 inches across the illustrated width.
- Original product view: cylindrical motor assembly with visible terminals and projecting ends; no connector pinout or electrical rating is inferred.
- Service identification resources: linked In-Wall guides help distinguish other motor and controller versions, with their applicability limits stated below.
Technical Specifications
- SKU: 240015
- Brand: Lippert
- Series: In-Wall® Slide-Out
- Hardware Type: Motor
- Quantity In Package: 1
- Warranty Term: 1 Year
- Country of Origin: CHN
- Unit of Measure: EA
- Reference Vendor/Manufacturer Name: Lippert
- UPC: 848150048424
- Shipping Dimensions: 29" L x 16" W x 12" H, 24 lbs.
Before You Order
Confirm the original motor part number, 5 mm configuration, mechanical interface and controller documentation. Gear ratio and controller compatibility are not established by this page. No exact parent system SKU or vehicle-model fit is inferred.
How do I confirm the right motor?
Match Lippert SKU 240015 and the IG-42 5 mm designation against the original motor, system manual and mechanical/electrical interfaces. The source body also uses IG-42GM wording. The reviewed QR-144 identification guide lists 229466, 236575 and 287298, but does not identify 240015. Its other motor drawings and part numbers do not prove this SKU is interchangeable with them.
Is it a 300:1 or 500:1 motor?
The exact 240015 page does not specify a gear ratio. TI-160 distinguishes 236575 at 300:1 from 287298 at 500:1 and directs matching the original ratio. That family guidance does not assign either ratio to 240015. Do not order this motor as a high-torque conversion or replacement for those part numbers without exact confirmation.
What does 5 mm measure?
The product title, quick facts and feature graphic call this the 5 mm motor assembly, but do not define which feature that measurement describes. It is retained as the manufacturer's configuration designation rather than asserted to be a verified shaft diameter or length.
What size and weight are provided?
The approximate-dimension graphic shows 1.77 inches across the illustrated width, 4.49 inches along the body span and 5.83 inches overall. It does not dimension the mounting holes, shaft diameter or connector. The separate specification table gives shipping dimensions of 29 x 16 x 12 inches at 24 pounds; these are package figures, not motor dimensions or net weight.
Which controller or wiring will it work with?
No exact controller, voltage, current, torque, connector pinout or harness is specified for 240015 on the focused page. TI-160 covers named In-Wall motor/controller combinations and some controller upgrades require different harnesses, but it does not name this SKU. Confirm the exact original motor and controller combination rather than transferring those instructions to this product.
What is included?
One replacement IG-42 5 mm motor assembly is listed. The photo shows the assembled motor; separate controller, wiring harness, coupler, H-column, mounting hardware, tools and complete slide-out system are not itemized. Vehicle, awning and camping scenes are representative illustrations, not included contents.
Can I follow the linked replacement guide?
TI-162 is a general In-Wall motor replacement reference with separate procedures for systems with and without a motor notch. Both require interior and exterior access, and the older-style procedure calls for supporting the slide room. The guide does not name 240015; confirm applicability to the exact system before using it. The page's DIY wording is not a verified step-by-step procedure for every In-Wall installation.
Does this fit every Schwintek-equipped RV?
No universal vehicle fit is established. The manufacturer describes various In-Wall applications and tells buyers to consult their owner's manual. Brand history, a similar-looking motor or a representative RV photo is not enough to confirm compatibility.
Which part references and warranty are listed?
Use Lippert SKU 240015 and UPC 848150048424. The page lists a one-year warranty term, Country of Origin: CHN and quantity one. It does not name a separate RV-builder cross-reference or superseded part number. Warranty coverage remains subject to Lippert's terms.
Compare Other In-Wall Motor Configurations
The IG-42 10 mm motor 236575 and 500:1 high-torque motor 287298 are separate configurations. The identification guides distinguish them; neither is established as interchangeable with 240015.
In-Wall Identification and Service References
These linked manufacturer documents cover the In-Wall family and do not identify 240015 as an exact compatible motor:
- QR-144 In-Wall Motor Part Number Identification — general reference; does not identify 240015
- TI-160 In-Wall Motor/Controller Compatibility — general reference; does not identify 240015
- TI-162 Replacing an In-Wall Motor — system-style procedure; confirm applicability
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 240015 |
|---|---|
| Brand | Lippert |
| Series | In-Wall® Slide-Out |
| Hardware type | Motor |
| Quantity in package | 1 |
| Warranty term | 1 Year |
| Country of origin | CHN |
| Unit of measure | EA |
| Reference vendor/manufacturer name | Lippert |
| Upc | 848150048424 |
| Shipping dimensions | 29" L x 16" W x 12" H, 24 lbs. |
- How do i confirm the right motor? Match Lippert SKU 240015 and the IG-42 5 mm designation against the original motor, system manual and mechanical/electrical interfaces. The source body also uses IG-42GM wording. The reviewed QR-144 identification guide lists 229466, 236575 and 287298, but does not identify 240015. Its other motor drawings and part numbers do not prove this SKU is interchangeable with them.
- Is it a 300:1 or 500:1 motor? The exact 240015 page does not specify a gear ratio. TI-160 distinguishes 236575 at 300:1 from 287298 at 500:1 and directs matching the original ratio. That family guidance does not assign either ratio to 240015. Do not order this motor as a high-torque conversion or replacement for those part numbers without exact confirmation.
- What does 5 mm measure? The product title, quick facts and feature graphic call this the 5 mm motor assembly, but do not define which feature that measurement describes. It is retained as the manufacturer's configuration designation rather than asserted to be a verified shaft diameter or length.
- What size and weight are provided? The approximate-dimension graphic shows 1.77 inches across the illustrated width, 4.49 inches along the body span and 5.83 inches overall. It does not dimension the mounting holes, shaft diameter or connector. The separate specification table gives shipping dimensions of 29 x 16 x 12 inches at 24 pounds; these are package figures, not motor dimensions or net weight.
- Which controller or wiring will it work with? No exact controller, voltage, current, torque, connector pinout or harness is specified for 240015 on the focused page. TI-160 covers named In-Wall motor/controller combinations and some controller upgrades require different harnesses, but it does not name this SKU. Confirm the exact original motor and controller combination rather than transferring those instructions to this product.
- What is included? One replacement IG-42 5 mm motor assembly is listed. The photo shows the assembled motor; separate controller, wiring harness, coupler, H-column, mounting hardware, tools and complete slide-out system are not itemized. Vehicle, awning and camping scenes are representative illustrations, not included contents.
- Can i follow the linked replacement guide? TI-162 is a general In-Wall motor replacement reference with separate procedures for systems with and without a motor notch. Both require interior and exterior access, and the older-style procedure calls for supporting the slide room. The guide does not name 240015; confirm applicability to the exact system before using it. The page's DIY wording is not a verified step-by-step procedure for every In-Wall installation.
- Does this fit every schwintek-equipped rv? No universal vehicle fit is established. The manufacturer describes various In-Wall applications and tells buyers to consult their owner's manual. Brand history, a similar-looking motor or a representative RV photo is not enough to confirm compatibility.
- Which part references and warranty are listed? Use Lippert SKU 240015 and UPC 848150048424. The page lists a one-year warranty term, Country of Origin: CHN and quantity one. It does not name a separate RV-builder cross-reference or superseded part number. Warranty coverage remains subject to Lippert's terms.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.









