Lippert ABS 6K Brake Hub Kit with Installed Bearings - Black, 1/2-in Studs - 2025077660
Ready to order
Lippert ABS 6K Brake Hub Kit with Installed Bearings - Black, 1/2-in Studs - 2025077660
---
Lippert ABS 6K Brake Hub Kit with Installed Bearings - Black, 1/2-in Studs - 2025077660
Lippert 2025077660 is a black 12-inch ABS brake hub complete kit with pre-greased, installed bearings for one wheel end on a matching 6,000-pound axle. It uses a 6 on 5-1/2-inch bolt pattern and 1/2-inch studs, and is listed for 15 to 16-inch wheels. Cast-in tone-ring teeth work with the existing Lippert ABS sensor and Lippert ABS electric brakes. It is not compatible with Dexter ABS.
This kit supplies a replacement hub and the listed cap and spindle hardware for one matching wheel end. It does not include a complete brake backing-plate assembly, ABS sensor or controller, wheel or axle. Confirm the original axle identification and wheel-end specifications before ordering.
Why Choose This ABS Hub Kit?
- Installed bearings: Pre-greased, installed bearings and pre-installed races simplify matching wheel-end service.
- Lippert ABS interface: Cast-in tone-ring teeth integrate with the existing compatible Lippert ABS sensor.
- Defined fit: 6,000-lb axle application, 12-inch brake hub, six studs on a 5.5-inch bolt circle and 1/2-inch studs.
- Wheel range: Listed for 15 to 16-inch wheels; match the original spindle, bearings and seals.
- Durable construction: Black cast-iron hub with corrosion-resistant zinc-plated wheel studs.
- Cap and lubrication: Accepts press-in dust caps and uses the published sealed-grease lubrication system.
- Single wheel end: One wheel-end kit in a kraft box; limited one-year warranty for materials or workmanship defects under manufacturer terms.
Technical Specifications
- SKU: 2025077660
- Brand: Lippert
- Series: ABS
- Stud Size: 1/2"
- Brake Type: ABS Compatible
- Lubrication System: Sealed Grease
- Axle Capacity: 6,000 lbs.
- Brake Size: 12"
- Hub Style: Brake Hub
- Hub Bolt Pattern: 6 on 5.5"
- Wheel Size: 15" - 16"
- Hardware Type: Hub
- Material Type: Cast Iron
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- UPC: 848150077745
- Shipping Dimensions: 15.5" L x 14" W x 7.5" H, 32.44 lbs.
Before You Order
Confirm the original axle tag, spindle, bearing and seal requirements, brake size, wheel bolt circle, stud size and Lippert ABS system. Shared capacity or bolt pattern alone does not establish fit.
What is included?
The source lists one ABS brake hub assembly, one dust cap with plug, one 1.75-inch cotter pin, one 1-inch six-slot castle spindle nut, one round spindle washer with 1.06-inch inside diameter and 2-inch outside diameter, and six 60-degree cone trailer lug nuts. Bearings are pre-greased and installed; races and zinc-plated studs are pre-installed. A brake backing-plate assembly, sensor, controller, wheel and complete axle are not itemized as included.
Does it fit every 6K axle or Dexter ABS?
No. Match the original axle, spindle, bearing and seal requirements, 6,000-pound axle application, 12-inch brake, 6 on 5.5-inch bolt pattern, 1/2-inch studs and listed 15 to 16-inch wheel range. Lippert explicitly excludes Dexter ABS. Generic universal-fit or competitor-axle language does not override these exact restrictions. The axle capacity is not an additional per-hub rating.
Is this a complete ABS conversion kit?
No. The cast-in teeth work with an existing compatible Lippert ABS sensor and Lippert ABS electric brakes. The source does not list an ABS module, sensor, wiring or complete brake assembly as supplied.
Which cap and lubricant does it use?
The source specifies sealed grease and acceptance of press-in dust caps; the kit includes a dust cap with plug. The photographed red lubricant does not establish its grade, service interval or fill procedure. Follow the original axle and bearing instructions; do not substitute a threaded cap based on appearance.
Where is it made?
The manufacturer specification table lists Country of Origin: USA, while its product photos show CHINA on both the hub casting and bearing. These source details conflict. We retain the manufacturer table as published and disclose the photographed markings; exact production origin for the supplied assembly is not confirmed.
What measurements are provided?
The published shipping package is 15.5 x 14 x 7.5 inches and 32.44 pounds. These are package figures, not installed hub dimensions or net weight. The page also specifies a 12-inch brake, 6 on 5.5-inch bolt pattern, 1/2-inch studs and a 15 to 16-inch wheel range. Exact spindle dimensions and hub offset are not supplied.
Which part number should I match?
Match Lippert SKU 2025077660 and UPC 848150077745 along with the original axle tag and wheel-end requirements. No separate OEM cross-reference, superseded part or exact parent axle SKU is established on the focused page. A visible bearing marking in a product photograph does not establish a complete replacement bearing and seal set.
Are installation instructions linked?
The Product Support link opens the general Lippert support homepage; no exact kit PDF is linked. The Learn & Explore hub-replacement article is general guidance. Have a qualified trailer technician verify spindle and bearing fit, ABS sensor alignment, lubrication, brake adjustment and fastener requirements using the original assembly instructions. No torque, stud thread pitch or bearing-preload procedure is inferred.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Compare Color Options
The red Lippert 6K ABS hub kit 2025077664 has the same published fitment configuration and listed contents. Each color has its own SKU, UPC and shipping weight. Confirm the original axle, spindle and ABS requirements for either color.
| Sku | 2025077660 |
|---|---|
| Brand | Lippert |
| Series | ABS |
| Stud size | 1/2" |
| Brake type | ABS Compatible |
| Lubrication system | Sealed Grease |
| Axle capacity | 6,000 lbs. |
| Brake size | 12" |
| Hub style | Brake Hub |
| Hub bolt pattern | 6 on 5.5" |
| Wheel size | 15" - 16" |
| Hardware type | Hub |
| Material type | Cast Iron |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Upc | 848150077745 |
| Shipping dimensions | 15.5" L x 14" W x 7.5" H, 32.44 lbs. |
- What is included? The source lists one ABS brake hub assembly, one dust cap with plug, one 1.75-inch cotter pin, one 1-inch six-slot castle spindle nut, one round spindle washer with 1.06-inch inside diameter and 2-inch outside diameter, and six 60-degree cone trailer lug nuts. Bearings are pre-greased and installed; races and zinc-plated studs are pre-installed. A brake backing-plate assembly, sensor, controller, wheel and complete axle are not itemized as included.
- Does it fit every 6k axle or dexter abs? No. Match the original axle, spindle, bearing and seal requirements, 6,000-pound axle application, 12-inch brake, 6 on 5.5-inch bolt pattern, 1/2-inch studs and listed 15 to 16-inch wheel range. Lippert explicitly excludes Dexter ABS. Generic universal-fit or competitor-axle language does not override these exact restrictions. The axle capacity is not an additional per-hub rating.
- Is this a complete abs conversion kit? No. The cast-in teeth work with an existing compatible Lippert ABS sensor and Lippert ABS electric brakes. The source does not list an ABS module, sensor, wiring or complete brake assembly as supplied.
- Which cap and lubricant does it use? The source specifies sealed grease and acceptance of press-in dust caps; the kit includes a dust cap with plug. The photographed red lubricant does not establish its grade, service interval or fill procedure. Follow the original axle and bearing instructions; do not substitute a threaded cap based on appearance.
- Where is it made? The manufacturer specification table lists Country of Origin: USA, while its product photos show CHINA on both the hub casting and bearing. These source details conflict. We retain the manufacturer table as published and disclose the photographed markings; exact production origin for the supplied assembly is not confirmed.
- What measurements are provided? The published shipping package is 15.5 x 14 x 7.5 inches and 32.44 pounds. These are package figures, not installed hub dimensions or net weight. The page also specifies a 12-inch brake, 6 on 5.5-inch bolt pattern, 1/2-inch studs and a 15 to 16-inch wheel range. Exact spindle dimensions and hub offset are not supplied.
- Which part number should i match? Match Lippert SKU 2025077660 and UPC 848150077745 along with the original axle tag and wheel-end requirements. No separate OEM cross-reference, superseded part or exact parent axle SKU is established on the focused page. A visible bearing marking in a product photograph does not establish a complete replacement bearing and seal set.
- Are installation instructions linked? The Product Support link opens the general Lippert support homepage; no exact kit PDF is linked. The Learn & Explore hub-replacement article is general guidance. Have a qualified trailer technician verify spindle and bearing fit, ABS sensor alignment, lubrication, brake adjustment and fastener requirements using the original assembly instructions. No torque, stud thread pitch or bearing-preload procedure is inferred.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.











