Lippert ABS 3.5K Brake Hub Kit with Installed Bearings - Black, 1/2-in Studs - 2025077652
Ready to order
Lippert ABS 3.5K Brake Hub Kit with Installed Bearings - Black, 1/2-in Studs - 2025077652
---
Lippert ABS 3.5K Brake Hub Kit with Installed Bearings - Black, 1/2-in Studs - 2025077652
Lippert 2025077652 is a black 10-inch ABS brake hub kit with pre-greased, installed bearings for one wheel end on a matching 3,500-pound axle. It uses a 5 on 4-1/2-inch bolt pattern and 1/2-inch studs, with a published 12 to 15-inch wheel range. Cast-in tone-ring teeth work with the existing Lippert ABS sensor and Lippert ABS electric brakes. It is not compatible with Dexter ABS.
Why Choose This ABS Hub Kit?
- Pre-greased, installed bearings and pre-installed races simplify matching wheel-end service.
- Cast-in tone-ring teeth work with an existing compatible Lippert ABS sensor and Lippert ABS electric brakes.
- 3,500-lb axle application, 10-inch brake hub, 5 on 4.5-inch bolt pattern and 1/2-inch studs.
- For 12 to 15-inch wheels; match the original spindle, bearing and seal requirements.
- Cast-iron hub with black finish and pre-installed corrosion-resistant zinc-plated wheel studs.
- Sealed Grease is the published lubrication system; the hub accepts press-in dust caps.
- One wheel-end kit in a kraft box; limited one-year warranty on materials or workmanship defects under manufacturer terms.
Technical Specifications
- SKU: 2025077652
- Brand: Lippert
- Series: ABS
- Stud Size: 1/2"
- Brake Type: ABS Compatible
- Lubrication System: Sealed Grease
- Axle Capacity: 3,500 lbs.
- Brake Size: 10"
- Hub Style: Brake Hub
- Hub Bolt Pattern: 5 on 4.5"
- Wheel Size: 12" - 15"
- Hardware Type: Hub
- Material Type: Cast Iron
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- UPC: 848150077660
- Shipping Dimensions: 13.5" L x 12" W x 6" H, 22.3 lbs.
Before You Order
Confirm the axle tag, spindle, bearings, seals, brake size, wheel bolt circle, stud diameter and existing Lippert ABS system. A shared bolt pattern or capacity alone does not confirm fit.
What is included?
The written contents list one ABS brake hub assembly; one dust cap with plug; one 1.75-inch cotter pin; one 1-inch 6-slot castle spindle nut; one round spindle washer with 1.03-inch inside diameter and 1.68-inch outside diameter; and five 60-degree cone trailer lug nuts. Bearings are pre-greased and installed; races and zinc-plated studs are pre-installed. A wheel, complete axle, brake backing-plate assembly, ABS sensor and controller are not listed as supplied.
Does it fit every 3.5K axle or Dexter ABS?
No. Match the original axle tag, spindle, bearing and seal requirements, 3,500-pound axle application, 10-inch brake size, 5 on 4.5-inch bolt circle, 1/2-inch stud diameter and 12 to 15-inch wheel range. Lippert explicitly excludes Dexter ABS. Generic universal-fit or competitor-axle wording does not confirm this exact kit as a match. The axle capacity is not an additional per-hub rating.
Is this an ABS conversion kit?
This is replacement wheel-end hardware for an existing compatible Lippert ABS electric-brake system. Cast-in tone-ring teeth work with the existing compatible ABS sensor. The kit does not provide or establish fit for a complete ABS conversion, controller, wiring or sensor installation.
What lubricant and dust cap should I use?
Lippert lists Sealed Grease and pre-greased, installed bearings, with a press-in dust-cap interface. The included cap has a plug. The lubricant visible in the photos does not establish its grade, service interval or a filling procedure. Follow the original axle and bearing instructions for this exact assembly.
Where is it made?
The manufacturer specification table lists Country of Origin: USA, while the product photographs show MADE IN CHINA on the hub casting and CHINA on the bearing. These source details conflict. We preserve the published specification and disclose the photographed markings; exact production origin for the supplied assembly is not confirmed.
What measurements are provided?
The shipping package is 13.5 x 12 x 6 inches and 22.3 pounds. These are package figures, not installed hub dimensions or net weight. The page also specifies the 10-inch brake, 5 on 4.5-inch bolt pattern, 1/2-inch studs and 12 to 15-inch wheels. Exact spindle dimensions, hub offset and bearing bores are not supplied. The included spindle nut is described as 1-inch 6-slot; its thread pitch and the lug-nut thread pitch are not specified.
Which part number should I match?
Match Lippert SKU 2025077652 and UPC 848150077660 together with the original axle tag and wheel-end requirements. No separate OEM cross-reference, superseded part or exact parent axle SKU is established on the focused page. A photographed casting or bearing marking alone does not establish a complete replacement bearing and seal set.
Are installation instructions linked?
The focused Support area provides general Lippert support resources, with no exact kit PDF linked. The hub-replacement article is general guidance. Have a qualified trailer technician verify spindle and bearing fit, lubrication, ABS sensor alignment, brake adjustment and fastener requirements using the original assembly instructions. No torque or bearing-preload procedure is inferred.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 2025077652 |
|---|---|
| Brand | Lippert |
| Series | ABS |
| Stud size | 1/2" |
| Brake type | ABS Compatible |
| Lubrication system | Sealed Grease |
| Axle capacity | 3,500 lbs. |
| Brake size | 10" |
| Hub style | Brake Hub |
| Hub bolt pattern | 5 on 4.5" |
| Wheel size | 12" - 15" |
| Hardware type | Hub |
| Material type | Cast Iron |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Upc | 848150077660 |
| Shipping dimensions | 13.5" L x 12" W x 6" H, 22.3 lbs. |
- What is included? The written contents list one ABS brake hub assembly; one dust cap with plug; one 1.75-inch cotter pin; one 1-inch 6-slot castle spindle nut; one round spindle washer with 1.03-inch inside diameter and 1.68-inch outside diameter; and five 60-degree cone trailer lug nuts. Bearings are pre-greased and installed; races and zinc-plated studs are pre-installed. A wheel, complete axle, brake backing-plate assembly, ABS sensor and controller are not listed as supplied.
- Does it fit every 3.5k axle or dexter abs? No. Match the original axle tag, spindle, bearing and seal requirements, 3,500-pound axle application, 10-inch brake size, 5 on 4.5-inch bolt circle, 1/2-inch stud diameter and 12 to 15-inch wheel range. Lippert explicitly excludes Dexter ABS. Generic universal-fit or competitor-axle wording does not confirm this exact kit as a match. The axle capacity is not an additional per-hub rating.
- Is this an abs conversion kit? This is replacement wheel-end hardware for an existing compatible Lippert ABS electric-brake system. Cast-in tone-ring teeth work with the existing compatible ABS sensor. The kit does not provide or establish fit for a complete ABS conversion, controller, wiring or sensor installation.
- What lubricant and dust cap should i use? Lippert lists Sealed Grease and pre-greased, installed bearings, with a press-in dust-cap interface. The included cap has a plug. The lubricant visible in the photos does not establish its grade, service interval or a filling procedure. Follow the original axle and bearing instructions for this exact assembly.
- Where is it made? The manufacturer specification table lists Country of Origin: USA, while the product photographs show MADE IN CHINA on the hub casting and CHINA on the bearing. These source details conflict. We preserve the published specification and disclose the photographed markings; exact production origin for the supplied assembly is not confirmed.
- What measurements are provided? The shipping package is 13.5 x 12 x 6 inches and 22.3 pounds. These are package figures, not installed hub dimensions or net weight. The page also specifies the 10-inch brake, 5 on 4.5-inch bolt pattern, 1/2-inch studs and 12 to 15-inch wheels. Exact spindle dimensions, hub offset and bearing bores are not supplied. The included spindle nut is described as 1-inch 6-slot; its thread pitch and the lug-nut thread pitch are not specified.
- Which part number should i match? Match Lippert SKU 2025077652 and UPC 848150077660 together with the original axle tag and wheel-end requirements. No separate OEM cross-reference, superseded part or exact parent axle SKU is established on the focused page. A photographed casting or bearing marking alone does not establish a complete replacement bearing and seal set.
- Are installation instructions linked? The focused Support area provides general Lippert support resources, with no exact kit PDF linked. The hub-replacement article is general guidance. Have a qualified trailer technician verify spindle and bearing fit, lubrication, ABS sensor alignment, brake adjustment and fastener requirements using the original assembly instructions. No torque or bearing-preload procedure is inferred.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.











