Lippert 7K Idler Hub, 8 on 6.5, 9/16 Studs, Bearing Kit - 427443
Ready to order
Lippert 7K Idler Hub, 8 on 6.5, 9/16 Studs, Bearing Kit - 427443
---
Eight-Lug Idler Hub with an Uninstalled Bearing Kit
Lippert 427443 is a cast-iron idler hub for a matching 7,000-pound trailer axle. It has an 8-on-6-1/2-inch wheel pattern, 9/16-inch studs and a listed 16-inch wheel application. This hub supports a non-braking idler installation; it is not a brake drum or rotor.
One hub and a bearing kit are listed. The title and written description specify that the bearing kit is not installed, although the gallery shows greased bearings seated in the hub. Verify the supplied configuration and bearing identities rather than treating those photos as a prepacked-assembly promise.
Why Choose This Idler Hub?
- 7,000-pound axle application: Match the original idler axle and spindle; the rating does not increase the trailer capacity.
- Eight-lug pattern: The wheel pattern is 8 on a 6-1/2-inch circle, with a listed 16-inch wheel application.
- 9/16-inch studs: Lippert specifies 1.5-inch stud length and zinc-plated wheel studs.
- Cast-iron body: The manufacturer specifies cast iron for the idler hub.
- Separate bearing-kit installation: The product title and description identify the included bearing kit as not installed.
- Press-in dust-cap interface: The quick facts identify a press-in cap arrangement, without giving the cap diameter.
Technical Specifications
- SKU: 427443
- Brand: Lippert
- Stud Size: 9/16"
- Stud Length: 1.5"
- Axle Capacity: 7,000 lbs.
- Hub Style: Idler Hub
- Hub Bolt Pattern: 8 on 6.5"
- Wheel Size: 16"
- Hardware Type: Hub
- Material Type: Cast Iron
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- UPC: 848150069061
- Shipping Dimensions: 16" L x 16" W x 7.25" H, 20 lbs.
Before You Order
Match SKU 427443 and UPC 848150069061 to the original equipment record. Confirm the 7,000-pound axle application, eight-lug pattern, 9/16-inch stud diameter and wheel requirements. Lippert expressly calls for checking bearing numbers and other dimensions. The focused page gives no exact spindle or parent-axle SKU, bearing journal measurements, seal dimensions or cap diameter.
Are the bearings already installed and greased?
The product title and description say the bearing kit is not installed. Several gallery views show greased bearings seated in the hub, which differs from that written configuration. Treat the gallery as illustrative of the hub, not a promise of installed or prepacked bearings; confirm the received parts and installation requirements before service.
Can this hub operate trailer brakes?
No. Lippert identifies it for idler axles and states that it does not allow a trailer braking system. It is not a brake drum or disc rotor. Do not use this listing as authorization to remove or disable an existing brake system.
Which axle and wheel configuration is listed?
Lippert specifies a 7,000-pound axle application, an 8-on-6.5-inch bolt pattern, 9/16-inch studs and a 16-inch wheel application. Also match the spindle, bearing numbers, seal fit and wheel mounting dimensions; axle capacity and lug pattern alone do not establish fit.
What is included?
The included-items field lists one idler hub and a bearing kit. The written configuration says the kit is not installed. Exact bearing and seal numbers, cap part number, lug-nut count, cotter pin and spindle hardware are not itemized on the focused page.
What kind of dust cap does it use?
Lippert states that this hub accepts press-in dust caps. The page does not give the cap bore, exact cap SKU or an oil-bath specification. Do not substitute a threaded cap based on a similar-looking hub.
Is the 1.5-inch stud length the usable thread projection?
The table labels Stud Length as 1.5 inches but does not define the measurement endpoints or usable threaded projection. Stud diameter is 9/16 inch; thread pitch is not specified on this page. Confirm the wheel and nut engagement requirements against the original hardware.
Is the races-and-studs-only hub the same package?
The separately listed 2024029116 hub has a similar axle, bolt-pattern and stud description, but its package is described as races and wheel studs. This 427443 listing includes a bearing kit. The focused source does not establish identical casting, spindle fit or interchangeability between the packages.
Are exact service instructions linked?
The Support tab opens general Lippert support, without an exact 427443 PDF. The page instructs buyers to verify bearing numbers and dimensions. Bearing adjustment, lubrication, seal installation, spindle-nut procedure and wheel-nut torque must come from the applicable confirmed assembly instructions.
Compare a Different Hub Package
The Lippert 2024029116 idler hub with races and wheel studs is a separate package to compare. It is not presented here as a confirmed interchangeable substitute or a bearing-kit option for the same exact assembly.
The published 16 x 16 x 7.25-inch dimensions and 20-pound weight describe shipping, not the spindle or installed hub geometry.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 427443 |
|---|---|
| Brand | Lippert |
| Stud size | 9/16" |
| Stud length | 1.5" |
| Axle capacity | 7,000 lbs. |
| Hub style | Idler Hub |
| Hub bolt pattern | 8 on 6.5" |
| Wheel size | 16" |
| Hardware type | Hub |
| Material type | Cast Iron |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Upc | 848150069061 |
| Shipping dimensions | 16" L x 16" W x 7.25" H, 20 lbs. |
- Are the bearings already installed and greased? The product title and description say the bearing kit is not installed. Several gallery views show greased bearings seated in the hub, which differs from that written configuration. Treat the gallery as illustrative of the hub, not a promise of installed or prepacked bearings; confirm the received parts and installation requirements before service.
- Can this hub operate trailer brakes? No. Lippert identifies it for idler axles and states that it does not allow a trailer braking system. It is not a brake drum or disc rotor. Do not use this listing as authorization to remove or disable an existing brake system.
- Which axle and wheel configuration is listed? Lippert specifies a 7,000-pound axle application, an 8-on-6.5-inch bolt pattern, 9/16-inch studs and a 16-inch wheel application. Also match the spindle, bearing numbers, seal fit and wheel mounting dimensions; axle capacity and lug pattern alone do not establish fit.
- What is included? The included-items field lists one idler hub and a bearing kit. The written configuration says the kit is not installed. Exact bearing and seal numbers, cap part number, lug-nut count, cotter pin and spindle hardware are not itemized on the focused page.
- What kind of dust cap does it use? Lippert states that this hub accepts press-in dust caps. The page does not give the cap bore, exact cap SKU or an oil-bath specification. Do not substitute a threaded cap based on a similar-looking hub.
- Is the 1.5-inch stud length the usable thread projection? The table labels Stud Length as 1.5 inches but does not define the measurement endpoints or usable threaded projection. Stud diameter is 9/16 inch; thread pitch is not specified on this page. Confirm the wheel and nut engagement requirements against the original hardware.
- Is the races-and-studs-only hub the same package? The separately listed 2024029116 hub has a similar axle, bolt-pattern and stud description, but its package is described as races and wheel studs. This 427443 listing includes a bearing kit. The focused source does not establish identical casting, spindle fit or interchangeability between the packages.
- Are exact service instructions linked? The Support tab opens general Lippert support, without an exact 427443 PDF. The page instructs buyers to verify bearing numbers and dimensions. Bearing adjustment, lubrication, seal installation, spindle-nut procedure and wheel-nut torque must come from the applicable confirmed assembly instructions.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.







