Lippert 7K 12-inch Brake Hub Kit with Installed Bearings, 9/16-in - 2024013261
Ready to order
Lippert 7K 12-inch Brake Hub Kit with Installed Bearings, 9/16-in - 2024013261
---
Lippert 7K 12-inch Brake Hub Kit with Installed Bearings, 9/16-in - 2024013261
Lippert 2024013261 is a 12-inch cast-iron brake hub kit with pre-greased, installed bearings for a matching 7,000-pound axle wheel end. It uses an 8 on 6-1/2-inch bolt pattern, 9/16-inch studs and a published 16 to 17-1/2-inch wheel range. The drum surface works with compatible electric or hydraulic drum brakes.
The package serves one wheel end: one brake hub assembly with installed pre-greased bearings, one dust cap with plug, one 1.75-inch cotter pin, one 1-inch six-slot castle spindle nut, one round spindle washer and eight 60-degree cone lug nuts. Races and zinc-plated wheel studs are pre-installed. A brake backing-plate assembly, wheel, tire, spindle and complete axle are not listed as included.
Why Choose This Complete Hub Kit?
- Pre-greased bearing kit is installed in the hub assembly.
- One-wheel-end kit includes the listed cap, plug, cotter pin, castle nut, washer and eight lug nuts.
- 7,000-pound axle application; 12-inch drum, 8 on 6.5-inch pattern and 9/16-inch studs.
- For the manufacturer’s stated 16 to 17-1/2-inch wheel range.
- Compatible with matching electric or hydraulic drum brakes.
- Cast-iron hub with pre-installed races and zinc-plated studs; accepts press-in dust caps.
- Limited one-year materials/workmanship warranty under manufacturer terms.
Technical Specifications
- SKU: 2024013261
- Brand: Lippert
- Weight Capacity: 7,000 lbs.
- Stud Size: 9/16"
- Stud Length: 1.5"
- Lubrication System: Sealed Grease
- Axle Capacity: 7,000 lbs.
- Brake Size: 12"
- Hub Style: Brake Hub
- Hub Bolt Pattern: 8 on 6.5"
- Wheel Size: 16" - 17-1/2"
- Hardware Type: Hub
- Material Type: Cast Iron
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Retail Box
- Country of Origin: USA
- Manufacturer Reference Number: K-141290
- Supersedes SKU: 814204
- UPC: 848150068071
- Shipping Dimensions: 13" L x 11.5" W x 6" H, 34.012 lbs.
Before You Order
Match Lippert 2024013261, K-141290 or superseded SKU 814204 to the original assembly, then confirm spindle, bearing and seal requirements, wheel bolt circle, stud dimensions and wheel range. The half-inch-stud kit has a different wheel range and is not treated as interchangeable.
What exactly is included?
The package serves one wheel end: one brake hub assembly with installed pre-greased bearings, one dust cap with plug, one 1.75-inch cotter pin, one 1-inch six-slot castle spindle nut, one round spindle washer and eight 60-degree cone lug nuts. Races and zinc-plated wheel studs are pre-installed. A brake backing-plate assembly, wheel, tire, spindle and complete axle are not listed as included.
What hardware dimensions are published?
The studs are listed as 9/16 inch and 1.5 inches long. Included lug nuts fit 9/16-18 studs and have a 60-degree cone seat. The cotter pin is 1-3/4 inches long. The six-slot castle nut has 1-14 threads, a 1-1/2-inch hex and 9/16-inch height. The round washer is 1.06 inches inside diameter and 2 inches outside diameter. Confirm these match the original spindle and wheel requirements.
Will it fit every 7K axle?
No universal fit is established by capacity alone. Confirm the axle tag, spindle and bearing/seal fit, 12-inch drum brakes, 8 on 6.5-inch pattern, 9/16-inch studs, stud length, lug-seat design and stated wheel range. The manufacturer’s competitor-axle wording remains subject to those dimensions and the original equipment requirements. No exact parent axle SKU is named.
Are the bearings installed, and is this an ABS kit?
The page expressly identifies the bearing kit as pre-greased and installed, with installed races and studs. It does not identify ABS compatibility or supply an ABS sensor or controller. This is not the same contents as a races-and-studs-only hub, and it is not a complete ABS conversion. The focused page does not establish a full bearing-and-seal part-number set or a separate grease-seal part number.
Which part number does it replace?
The specification table identifies manufacturer reference K-141290 and supersedes SKU 814204. Match both the original part identity and all wheel-end requirements; a supersession does not make every similar hub interchangeable.
Where is it made?
The manufacturer specification table lists Country of Origin USA. The product images show CHINA markings on the hub casting and bearing. These component markings are disclosed alongside the manufacturer’s assembly-origin field; the photos do not verify an all-USA component claim.
Are the box measurements installed dimensions?
The source lists shipping dimensions of 13 x 11.5 x 6 inches and shipping weight of 34.012 pounds. These are package figures, not net hub weight, installed width, hub offset or spindle dimensions. The 7,000-pound rating describes the axle application, not a new capacity per hub.
Are installation instructions or torque values linked?
The focused product page links the general Lippert support site, with no exact product PDF. It does not supply wheel torque, bearing preload, grease grade, cap diameter or an installation sequence. Use the instructions for the exact axle and wheel-end assembly and confirm fit with the original equipment manufacturer.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 2024013261 |
|---|---|
| Brand | Lippert |
| Weight capacity | 7,000 lbs. |
| Stud size | 9/16" |
| Stud length | 1.5" |
| Lubrication system | Sealed Grease |
| Axle capacity | 7,000 lbs. |
| Brake size | 12" |
| Hub style | Brake Hub |
| Hub bolt pattern | 8 on 6.5" |
| Wheel size | 16" - 17-1/2" |
| Hardware type | Hub |
| Material type | Cast Iron |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Retail Box |
| Country of origin | USA |
| Manufacturer reference number | K-141290 |
| Supersedes sku | 814204 |
| Upc | 848150068071 |
| Shipping dimensions | 13" L x 11.5" W x 6" H, 34.012 lbs. |
- What exactly is included? The package serves one wheel end: one brake hub assembly with installed pre-greased bearings, one dust cap with plug, one 1.75-inch cotter pin, one 1-inch six-slot castle spindle nut, one round spindle washer and eight 60-degree cone lug nuts. Races and zinc-plated wheel studs are pre-installed. A brake backing-plate assembly, wheel, tire, spindle and complete axle are not listed as included.
- What hardware dimensions are published? The studs are listed as 9/16 inch and 1.5 inches long. Included lug nuts fit 9/16-18 studs and have a 60-degree cone seat. The cotter pin is 1-3/4 inches long. The six-slot castle nut has 1-14 threads, a 1-1/2-inch hex and 9/16-inch height. The round washer is 1.06 inches inside diameter and 2 inches outside diameter. Confirm these match the original spindle and wheel requirements.
- Will it fit every 7k axle? No universal fit is established by capacity alone. Confirm the axle tag, spindle and bearing/seal fit, 12-inch drum brakes, 8 on 6.5-inch pattern, 9/16-inch studs, stud length, lug-seat design and stated wheel range. The manufacturer’s competitor-axle wording remains subject to those dimensions and the original equipment requirements. No exact parent axle SKU is named.
- Are the bearings installed, and is this an abs kit? The page expressly identifies the bearing kit as pre-greased and installed, with installed races and studs. It does not identify ABS compatibility or supply an ABS sensor or controller. This is not the same contents as a races-and-studs-only hub, and it is not a complete ABS conversion. The focused page does not establish a full bearing-and-seal part-number set or a separate grease-seal part number.
- Which part number does it replace? The specification table identifies manufacturer reference K-141290 and supersedes SKU 814204. Match both the original part identity and all wheel-end requirements; a supersession does not make every similar hub interchangeable.
- Where is it made? The manufacturer specification table lists Country of Origin USA. The product images show CHINA markings on the hub casting and bearing. These component markings are disclosed alongside the manufacturer’s assembly-origin field; the photos do not verify an all-USA component claim.
- Are the box measurements installed dimensions? The source lists shipping dimensions of 13 x 11.5 x 6 inches and shipping weight of 34.012 pounds. These are package figures, not net hub weight, installed width, hub offset or spindle dimensions. The 7,000-pound rating describes the axle application, not a new capacity per hub.
- Are installation instructions or torque values linked? The focused product page links the general Lippert support site, with no exact product PDF. It does not supply wheel torque, bearing preload, grease grade, cap diameter or an installation sequence. Use the instructions for the exact axle and wheel-end assembly and confirm fit with the original equipment manufacturer.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.











