Lippert 4,000-lb Slipper Spring, 7 Leaves, 2 x 26-1/2 in - 796558
Ready to order
Lippert 4,000-lb Slipper Spring, 7 Leaves, 2 x 26-1/2 in - 796558
---
4,000-lb Seven-Leaf Slipper Spring with Identification References
Lippert 796558 is a steel trailer slipper spring designed to flex under road shock and reduce vibration transmitted to the trailer. It uses a single-eye configuration with a pre-installed bushing, seven leaves and a two-inch width. Lippert rates the spring assembly at 4,000 pounds and lists a 26.5-inch length.
The package contains one spring, sold each, in a kraft box. Pre-mounted hangers are required and hanger kits are sold separately. This is a replacement spring, not an axle or complete suspension kit. Match the original suspension before ordering; a spring capacity alone does not establish the trailer rating or exact axle compatibility.
Why Choose This Slipper Spring?
- 4,000-pound capacity per spring assembly; seven steel leaves.
- Single-eye slipper design with a pre-installed eye bushing.
- Two-inch width and manufacturer-listed 26.5-inch length.
- Standens E-5226-7 and Dexter E-5226/7 identification references.
- One spring per kraft box; USA origin and one-year limited warranty.
Technical Specifications
- SKU: 796558
- Brand: Lippert
- Weight Capacity: 4,000 lbs.
- Standens Leaf Spring Number: E-5226-7
- Spring Layer Count: 7
- Eye To Eye Length: 26.5
- Axle Spring Type: Slipper Leaf
- Load Arch Length: 2
- Axle Type: Spring
- Hardware Type: Spring
- Unit of Measure: EA
- Item Length (Inches): 26.5
- Item Width (Inches): 2
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- Dexter Compatible Part Number: E-5226/7
- UPC: 848150066985
- Shipping Dimensions: 25" L x 8" W x 3" H, 26.72 lbs.
Before You Order
Compare the original equipment label and references E-5226-7, E-5226/7 and E5226/7. Verify spring width, end style, length measurement, required capacity, bushing and hanger arrangement. Lippert calls the length eye-to-eye although this is a single-eye spring; measurement endpoints and loaded condition are not defined. The Load Arch Length field is 2 with no stated unit. Do not substitute the package measurements for spring measurements.
What is the capacity of this spring?
Lippert rates this spring assembly at 4,000 pounds. This is a per-spring rating, not a declaration of trailer payload or a complete axle rating. Match the original suspension specification; replacing springs does not by itself change the trailer rating.
Is this a single-eye or double-eye spring?
It is a single-eye slipper spring. The photographs show an eye at one end and a formed slipper end at the other. Lippert nevertheless labels its 26.5-inch length as Eye To Eye Length. That is the manufacturer field wording, not evidence of a second eye. The focused page does not define the measuring endpoints or loaded/unloaded condition.
What references help identify the replacement?
Lippert SKU 796558 lists Standens Leaf Spring Number E-5226-7 and Dexter Compatible Part Number E-5226/7. The quick facts also use E5226/7. Compare the original equipment label, spring profile, width, end configuration and mounting arrangement before selecting it.
What is included, and are hangers supplied?
One slipper spring is listed, with a pre-installed eye bushing. Pre-mounted hangers are required; hanger kits are sold separately. An axle, hanger kit, equalizer, U-bolt kit and complete suspension assembly are not listed as included.
What does the Load Arch Length value mean?
Lippert prints Load Arch Length: 2 but supplies no unit or measurement condition for that field. It should not be treated as a verified two-inch unloaded arch or a mounting dimension. Confirm the original spring and exact suspension requirements.
Are the shipping measurements the spring dimensions?
No. Lippert separately lists the spring as 26.5 inches long and two inches wide, and the shipping package as 25 x 8 x 3 inches at 26.72 pounds. These source fields differ and are retained as published; the package length does not redefine the spring length.
Will it fit every Lippert or competitor axle?
Lippert describes broad compatibility with its own and competitor trailer axles, but the focused page names no exact parent axle or hanger model. The slipper style, dimensions, capacity, bushing and mounting arrangement must match. No universal bolt-on fit or substitution for a double-eye spring is established.
Are installation instructions linked?
The focused Support link opens general Lippert support, with no exact 796558 installation PDF. The page requires pre-mounted hangers and recommends checking the original equipment label and periodically inspecting the equipment. It supplies no bolt torque, eye-bore size or detailed installation procedure.
Compare Other Slipper Springs
The 5,000-lb, 2-1/2-inch-wide slipper spring 176326 has a different capacity and width. It is a comparison option, not a verified substitute for 796558.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 796558 |
|---|---|
| Brand | Lippert |
| Weight capacity | 4,000 lbs. |
| Standens leaf spring number | E-5226-7 |
| Spring layer count | 7 |
| Eye to eye length | 26.5 |
| Axle spring type | Slipper Leaf |
| Load arch length | 2 |
| Axle type | Spring |
| Hardware type | Spring |
| Unit of measure | EA |
| Item length (inches) | 26.5 |
| Item width (inches) | 2 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Dexter compatible part number | E-5226/7 |
| Upc | 848150066985 |
| Shipping dimensions | 25" L x 8" W x 3" H, 26.72 lbs. |
- What is the capacity of this spring? Lippert rates this spring assembly at 4,000 pounds. This is a per-spring rating, not a declaration of trailer payload or a complete axle rating. Match the original suspension specification; replacing springs does not by itself change the trailer rating.
- Is this a single-eye or double-eye spring? It is a single-eye slipper spring. The photographs show an eye at one end and a formed slipper end at the other. Lippert nevertheless labels its 26.5-inch length as Eye To Eye Length. That is the manufacturer field wording, not evidence of a second eye. The focused page does not define the measuring endpoints or loaded/unloaded condition.
- What references help identify the replacement? Lippert SKU 796558 lists Standens Leaf Spring Number E-5226-7 and Dexter Compatible Part Number E-5226/7. The quick facts also use E5226/7. Compare the original equipment label, spring profile, width, end configuration and mounting arrangement before selecting it.
- What is included, and are hangers supplied? One slipper spring is listed, with a pre-installed eye bushing. Pre-mounted hangers are required; hanger kits are sold separately. An axle, hanger kit, equalizer, U-bolt kit and complete suspension assembly are not listed as included.
- What does the load arch length value mean? Lippert prints Load Arch Length: 2 but supplies no unit or measurement condition for that field. It should not be treated as a verified two-inch unloaded arch or a mounting dimension. Confirm the original spring and exact suspension requirements.
- Are the shipping measurements the spring dimensions? No. Lippert separately lists the spring as 26.5 inches long and two inches wide, and the shipping package as 25 x 8 x 3 inches at 26.72 pounds. These source fields differ and are retained as published; the package length does not redefine the spring length.
- Will it fit every lippert or competitor axle? Lippert describes broad compatibility with its own and competitor trailer axles, but the focused page names no exact parent axle or hanger model. The slipper style, dimensions, capacity, bushing and mounting arrangement must match. No universal bolt-on fit or substitution for a double-eye spring is established.
- Are installation instructions linked? The focused Support link opens general Lippert support, with no exact 796558 installation PDF. The page requires pre-mounted hangers and recommends checking the original equipment label and periodically inspecting the equipment. It supplies no bolt torque, eye-bore size or detailed installation procedure.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.





