Lippert 28.125-Inch Collapsible Bed Table Stand - 645306
Ready to order
Lippert 28.125-Inch Collapsible Bed Table Stand - 645306
---
Lippert 645306 Collapsible Bed Table Stand
Replace the stand in a matching bed-table arrangement with Lippert 645306. The manufacturer lists an open size of 22 inches deep by 23.25 inches wide by 28.125 inches high. Use the original component number and all three dimensions to identify the stand you need; a matching footprint alone does not confirm the correct working height.
This package contains one replacement collapsible stand. The tabletop is not included, so this listing is for the support component rather than a complete table. Lippert also marks cargo mounts and the cargo trim kit as not included. Compare the original assembly and its installation requirements before ordering; the reviewed product information does not specify a load rating, fastener schedule or universal RV application.
Lippert identifies 237333 as the superseded part number for this stand. Retain that cross-reference when checking older parts records. The reviewed page does not state a collapsed height for 645306, so do not use the published collapsed height of the shorter stand as its specification.
Why Choose This Lippert Stand?
- Defined working height: The published open height is 28.125 inches for this exact part.
- Stand-only replacement: Keep the tabletop requirement separate from the support being ordered.
- Collapsible design: Lippert describes the component as a replacement collapsible bed-table stand.
- Clear component references: Manufacturer records list Jayco 0220219; Keystone RV 596844 for identification.
- Original-part comparison: The source drawing shows the support feet, upright members, cross-linkage and upper mounting bars.
Technical Specifications
- Lippert part: 645306
- Open depth: 22 inches
- Open width: 23.25 inches
- Open height: 28.125 inches
- Package quantity: One stand
- Tabletop included: No
- Cargo mounts included: No
- Cargo trim kit included: No
- Warranty term: 1 year
- Country of origin: China
- Jayco cross-reference: 0220219
- Keystone RV cross-reference: 596844
- Shipping package: 33" L x 26" W x 20" H, 22 lbs.
- Replaces: 237333
Before You Order
Confirm part 645306 or the applicable OEM reference in your parts records. Check the required open height as well as the 22-by-23.25-inch footprint, and compare the feet, upper bars and linkage shown in the drawing with your original stand. Lippert separately lists stand 203070 with a 26.125-inch open height; it is a different part number and should not be assumed interchangeable.
The listed shipping dimensions describe the packed shipment, not the open stand. No tabletop dimensions, mounting-hole spacing, load capacity or installation torque is supplied in the reviewed source. If those details are needed to establish your match, confirm them from documentation for your exact existing installation before purchasing. Related product recommendations for bed-lift motors and rails do not establish that this stand fits those systems.
| Lippert part | 645306 |
|---|---|
| Open depth | 22 inches |
| Open width | 23.25 inches |
| Open height | 28.125 inches |
| Package quantity | One stand |
| Tabletop included | No |
| Cargo mounts included | No |
| Cargo trim kit included | No |
| Warranty term | 1 year |
| Country of origin | China |
| Jayco cross-reference | 0220219 |
| Keystone rv cross-reference | 596844 |
| Shipping package | 33" L x 26" W x 20" H, 22 lbs. |
| Replaces | 237333 |
- Is a tabletop included? No. This listing supplies one replacement collapsible stand. Lippert explicitly excludes the tabletop.
- What is the open size? The manufacturer lists 22 inches deep by 23.25 inches wide by 28.125 inches high for part 645306.
- Are cargo mounts and a trim kit included? No. The manufacturer specifications mark both the cargo mounts and cargo trim kit as not included.
- Which oem numbers identify this component? Jayco 0220219; Keystone RV 596844. These are component cross-references, not approval for every RV from those manufacturers.
- Does the shorter or taller stand fit the same installation? Lippert separately numbers stand 203070 at 26.125 inches high. Compare the exact original part and required working height; interchangeability is not established by the shared footprint.
- What load rating and mounting measurements are published? The reviewed source does not state a load rating, mounting-hole spacing or fastener torque. Confirm the requirements of the original installation before ordering.
- Which earlier part does this replace? Lippert lists 237333 as the superseded part number for stand 645306. Check that exact reference in your original parts record.
Ready to order
Lippert 28.125-Inch Collapsible Bed Table Stand - 645306
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.