Lippert 15-Tooth Through-Frame Spur Gear, 10 DP/20 PA - 328044
Ready to order
Lippert 15-Tooth Through-Frame Spur Gear, 10 DP/20 PA - 328044
---
Lippert 15-Tooth Spur Gear, 10 DP / 20 PA
Lippert 328044 is a replacement 15-tooth spur gear for the manufacturer's stated hydraulic/electric 2 x 2 and 2.5 x 2.5 through-frame slide-out applications. Its published tooth designation is 10 DP / 20 PA, and the exact product page lists it as the replacement for SKU 178239.
This listing is for the replacement gear rather than a complete drive or gear-pack assembly. The manufacturer illustration shows a hexagonal center opening. A shaft, motor, gear-pack housing, pin and installation hardware are not itemized as included; compare your original gear and service part number before ordering.
Why Choose This Replacement Spur Gear?
- Exact gear identity: Lippert 328044, replacing manufacturer SKU 178239.
- 15-tooth configuration: match the original tooth count before ordering.
- Published tooth designation: 10 DP / 20 PA.
- Through-frame application: manufacturer names hydraulic/electric 2 x 2 and 2.5 x 2.5 slide-outs.
- Hexagonal opening illustrated: match the original shaft profile and measured bore.
- One-year warranty term: listed on the exact manufacturer product page.
Technical Specifications
- SKU: 328044
- Brand: Lippert
- Hardware Type: Gear
- Warranty Term: 1 Year
- Country of Origin: USA
- Unit of Measure: EA
- Supersedes SKU: 178239
- Shipping Dimensions: 1.75" L x 1.75" W x 0.75" H, 0.2 lbs.
- Tooth count: 15
- Gear designation: 10 DP / 20 PA
- Published application: Hydraulic/electric 2 x 2 and 2.5 x 2.5 through-frame slide-outs
- Manufacturer illustration: Spur gear with hexagonal center opening
- Bore and actual gear dimensions: Not specified on exact product page
- Material and treatment: Not specified on exact product page
Before You Order
Lippert describes it for hydraulic/electric 2 x 2 and 2.5 x 2.5 through-frame slide-outs. The page does not identify every complete gear pack, shaft, drive assembly or RV model, so verify the original part and service information.
The manufacturer title identifies 15 teeth and 10 DP / 20 PA. Tooth count alone is not sufficient: match the full designation, shaft interface and original dimensions. Do not substitute a gear with different tooth geometry.
The manufacturer illustration shows a hexagonal opening, but the product page gives no across-flats bore dimension, shaft size or mounting tolerance. Measure the original gear and shaft and confirm the exact service part.
No. The 1.75 x 1.75 x 0.75-inch dimensions and 0.2-pound weight are explicitly Shipping Dimensions. Actual outside diameter, face width and bore dimensions are not independently published on this page.
The Support link opens the general Lippert Customer Care homepage rather than an exact SKU-specific manual. Follow the correct instructions for your installed through-frame slide-out system, including its support and power-isolation requirements.
Compare Gear Identity Carefully
The separately listed 18-tooth through-frame spur gear 122739 has a different tooth count. It is shown only to help distinguish gear identities, not as an interchangeable replacement for 328044. Match the exact original part before choosing.
| Sku | 328044 |
|---|---|
| Brand | Lippert |
| Hardware type | Gear |
| Warranty term | 1 Year |
| Country of origin | USA |
| Unit of measure | EA |
| Supersedes sku | 178239 |
| Shipping dimensions | 1.75" L x 1.75" W x 0.75" H, 0.2 lbs. |
| Tooth count | 15 |
| Gear designation | 10 DP / 20 PA |
| Published application | Hydraulic/electric 2 x 2 and 2.5 x 2.5 through-frame slide-outs |
| Manufacturer illustration | Spur gear with hexagonal center opening |
| Bore and actual gear dimensions | Not specified on exact product page |
| Material and treatment | Not specified on exact product page |
- What systems is this gear used in? Lippert describes it for hydraulic/electric 2 x 2 and 2.5 x 2.5 through-frame slide-outs. The page does not identify every complete gear pack, shaft, drive assembly or RV model, so verify the original part and service information.
- Which part number does it replace? The exact manufacturer page lists 328044 as superseding 178239. Compare the original part number, gear profile and application before ordering.
- What tooth specifications should i match? The manufacturer title identifies 15 teeth and 10 DP / 20 PA. Tooth count alone is not sufficient: match the full designation, shaft interface and original dimensions. Do not substitute a gear with different tooth geometry.
- What is the center opening size? The manufacturer illustration shows a hexagonal opening, but the product page gives no across-flats bore dimension, shaft size or mounting tolerance. Measure the original gear and shaft and confirm the exact service part.
- Are the listed dimensions the gear dimensions? No. The 1.75 x 1.75 x 0.75-inch dimensions and 0.2-pound weight are explicitly Shipping Dimensions. Actual outside diameter, face width and bore dimensions are not independently published on this page.
- Does this include a complete gear pack or shaft? This is the replacement spur gear. A complete gear pack, shaft, pin, mounting bolts, motor and slide-out assembly are not itemized as included. Unit of measure is EA; there is no separate packing list.
- Is it interchangeable with other lippert spur gears? The focused source does not establish interchangeability with 18- or 24-tooth gears, a different DP/PA designation or copper-infiltrated part 700612. Match the exact original specification rather than choosing by appearance.
- What material is it made from? The exact product page does not state the material, heat treatment, coating or load rating. The gray manufacturer illustration is not proof of a specific alloy or treatment.
- Are installation instructions provided? The Support link opens the general Lippert Customer Care homepage rather than an exact SKU-specific manual. Follow the correct instructions for your installed through-frame slide-out system, including its support and power-isolation requirements.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


