Lippert 10K Slipper-Spring Front Axle Hanger, 8 x 2.75 in - 182242
Ready to order
Lippert 10K Slipper-Spring Front Axle Hanger, 8 x 2.75 in - 182242
---
Front Slipper-Spring Hanger for 10,000-lb Axle Applications
Lippert 182242 is a front trailer axle hanger for 10,000-pound axle applications using slipper leaf springs. This weld-on steel replacement is listed at 8 inches long and 2-3/4 inches wide. Match the original hanger, axle identification and chassis layout before ordering.
The package contains one axle hanger, not a complete suspension kit. Leaf springs, equalizers, bolts, bushings and an axle are not itemized as included. Lippert directs buyers to reference the original equipment label.
Why Choose This Front Hanger?
- Front mounting position: Designed as the front hanger in the matching slipper-spring suspension.
- 10,000-pound axle application: Identifies the intended axle class; it does not increase trailer capacity.
- Quarter-inch steel: Manufacturer-stated material thickness for the weld-on bracket.
- Single replacement: Package contains one axle hanger.
- Published size: 8-inch length and 2.75-inch width; the item table also lists 8-inch height.
- Manufacturer warranty: Lippert lists a one-year limited warranty.
Technical Specifications
- SKU: 182242
- Brand: Lippert
- Axle Capacity: 10,000 lbs.
- Hardware Type: Bracket/Brace
- Product Length: 8"
- Unit of Measure: EA
- Item Length (Inches): 8
- Item Width (Inches): 2.75
- Item Height (Inches): 8.000
- Item Weight (Pounds): 5.749
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: CHN
- Manufacturer Reference Number: 182242
- UPC: 848150068392
- Shipping Dimensions: 8" L x 8" W x 4" H, 5 lbs.
- Construction: 1/4-inch-thick steel
- Application: Front hanger for 10,000-lb axles with slipper leaf springs
- Attachment: Welded to trailer chassis
Fitment and Installation
Match the front mounting position, slipper-spring arrangement, axle class and original hanger geometry. The stated 10,000-pound application does not establish a capacity upgrade. Lippert mentions most competitor trailer axle springs but does not identify every compatible axle or trailer model.
This hanger welds to the chassis. The focused sources do not provide an exact weld placement, weld specification, hole diameter, internal clearance or hole-center dimensions. Use a technician qualified for suspension welding and follow the chassis manufacturer requirements.
Product and Shipping Measurements
The product listing gives an 8-inch length, 2.75-inch width, 8-inch item height and quarter-inch steel thickness. Separately, the shipping package is listed at 8 x 8 x 4 inches and 5 pounds. The Item Weight field says 5.749 pounds; the source entries differ and are not a reconciled scale measurement.
Compare the Rear Mounting Position
Lippert rear hanger 182245 is a different part for the rear position. Matching axle class and nominal length and width do not establish interchangeability or a confirmed complete suspension pairing.
Manuals and Documents
RV Leaf Springs and Bushings Installation Manual CCD-0011277 is a general service reference. It illustrates front hangers and spring-eye attachment but does not identify 182242 or provide its exact weld-on replacement procedure. Standard and heavy-duty sections use different hardware and torque values; identify the full assembly before applying a procedure.
Frequently Asked Questions
What suspension is this hanger intended for?
Lippert identifies 182242 for the front hanger position on 10,000-pound axle applications using slipper leaf springs. Axle capacity alone is not a complete fitment check; match the original equipment label, hanger geometry and chassis arrangement.
What is included?
The source lists one axle hanger in a kraft box. A pair, leaf springs, equalizers, bolts, bushings and a complete axle are not itemized as included.
What are the product dimensions?
The title and specifications list 8 inches long and 2.75 inches wide; the item table also lists an 8-inch height. Steel thickness is 0.25 inch. Internal clearance, hole diameter and hole-center dimensions are not supplied. Compare the original part rather than interpreting the package dimensions as installed geometry.
Why are there two weights?
Lippert lists Item Weight as 5.749 pounds and separately lists shipping dimensions of 8 x 8 x 4 inches at 5 pounds. These source entries differ. The shipping entry is retained as package data, not a verified measured hanger weight.
How does this hanger attach?
The source states that the hanger is welded to the chassis. It does not supply a SKU-specific weld size, location drawing or welding procedure. Have chassis fit and suspension welding requirements confirmed by a qualified technician.
Can the general manual supply the exact bolt size or torque?
CCD-0011277 illustrates slipper-spring service and front hangers, with different hardware and torque values in its standard and heavy-duty sections. It does not name 182242. Do not assign those values to this SKU without identifying the complete suspension assembly and its applicable procedure.
Is this the same as rear hanger 182245?
No. 182242 is the front hanger and 182245 is the rear hanger. Their shared axle class and nominal length and width do not establish interchangeability or prove they belong together on every trailer.
Will it fit competitor axles?
Lippert states compatibility with Lippert and most competitor trailer axle springs, but supplies no exact model list. Confirm the slipper-spring arrangement, original hanger dimensions and chassis attachment before purchase.
| Sku | 182242 |
|---|---|
| Brand | Lippert |
| Axle capacity | 10,000 lbs. |
| Hardware type | Bracket/Brace |
| Product length | 8" |
| Unit of measure | EA |
| Item length (inches) | 8 |
| Item width (inches) | 2.75 |
| Item height (inches) | 8.000 |
| Item weight (pounds) | 5.749 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | CHN |
| Manufacturer reference number | 182242 |
| Upc | 848150068392 |
| Shipping dimensions | 8" L x 8" W x 4" H, 5 lbs. |
| Construction | 1/4-inch-thick steel |
| Application | Front hanger for 10,000-lb axles with slipper leaf springs |
| Attachment | Welded to trailer chassis |
- What suspension is this hanger intended for? Lippert identifies 182242 for the front hanger position on 10,000-pound axle applications using slipper leaf springs. Axle capacity alone is not a complete fitment check; match the original equipment label, hanger geometry and chassis arrangement.
- What is included? The source lists one axle hanger in a kraft box. A pair, leaf springs, equalizers, bolts, bushings and a complete axle are not itemized as included.
- What are the product dimensions? The title and specifications list 8 inches long and 2.75 inches wide; the item table also lists an 8-inch height. Steel thickness is 0.25 inch. Internal clearance, hole diameter and hole-center dimensions are not supplied. Compare the original part rather than interpreting the package dimensions as installed geometry.
- Why are there two weights? Lippert lists Item Weight as 5.749 pounds and separately lists shipping dimensions of 8 x 8 x 4 inches at 5 pounds. These source entries differ. The shipping entry is retained as package data, not a verified measured hanger weight.
- How does this hanger attach? The source states that the hanger is welded to the chassis. It does not supply a SKU-specific weld size, location drawing or welding procedure. Have chassis fit and suspension welding requirements confirmed by a qualified technician.
- Can the general manual supply the exact bolt size or torque? CCD-0011277 illustrates slipper-spring service and front hangers, with different hardware and torque values in its standard and heavy-duty sections. It does not name 182242. Do not assign those values to this SKU without identifying the complete suspension assembly and its applicable procedure.
- Is this the same as rear hanger 182245? No. 182242 is the front hanger and 182245 is the rear hanger. Their shared axle class and nominal length and width do not establish interchangeability or prove they belong together on every trailer.
- Will it fit competitor axles? Lippert states compatibility with Lippert and most competitor trailer axle springs, but supplies no exact model list. Confirm the slipper-spring arrangement, original hanger dimensions and chassis attachment before purchase.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.



