Lippert 1,400-lb Four-Leaf Double-Eye Spring 72-13 - 125269
Ready to order
Lippert 1,400-lb Four-Leaf Double-Eye Spring 72-13 - 125269
---
Lippert 1,400-lb Double-Eye Leaf Spring 125269 / 72-13
Replace a correctly matched trailer suspension spring with this four-leaf steel Lippert spring. Its flexible leaf stack helps absorb road shock and vibration to reduce strain on the trailer. Lippert specifies a 1,400-pound spring assembly capacity, 1-3/4-inch nominal width and 20-1/2-inch unloaded eye-to-eye length.
The package contains one spring with pre-installed nylon bushings. Pre-mounted hangers are required; hanger kits and bronze bushings are sold separately. A complete axle, suspension kit, wheels and separate mounting hardware are not documented as included. The trailer-wheel image is representative.
Why Choose This Lippert Spring?
- Four-leaf steel spring: Flexes to help absorb road shock and vibration.
- 1,400-pound assembly capacity: Spring rating does not establish a complete axle or trailer rating.
- Double-eye design: Nominal 1.75-inch width and 20.5-inch unloaded eye-to-eye length.
- Pre-installed nylon bushings: Hanger kits and bronze bushings sold separately.
- Published references: Standens 72-13 and Dexter compatible 072-013-00.
- One spring per package: Kraft box and one-year manufacturer warranty term.
Technical Specifications
- SKU: 125269
- Brand: Lippert
- Weight Capacity: 1,400 lbs.
- Standens Leaf Spring Number: 72-13
- Load Length: 21"
- Spring Layer Count: 4
- Eye To Eye Length: 20.5
- Axle Spring Type: Double-Eye Leaf
- Load Arch Length: 2.375
- Axle Type: Spring
- Hardware Type: Spring
- Unit of Measure: EA
- Item Length (Inches): 20.5
- Item Width (Inches): 1.75
- Item Weight (Pounds): 9.180
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: CHN
- Manufacturer Reference Number: 125269
- Reference Vendor/Manufacturer Name: Lippert
- Dexter Compatible Part Number: 072-013-00
- UPC: 848150052506
- Shipping Dimensions: 12" L x 8.5" W x 8.5" H, 11.11 lbs.
- Approximate drawing - loaded length: 21.5 inches; differs from table Load Length 21 inches and feature graphic 21 inches
- Approximate drawing - loaded arch: 3.375 inches; differs from table Load Arch Length 2.375
- Approximate drawing - width range: 1.72 to 1.79 inches
- Approximate drawing - eye opening callout: 0.573 to 0.603 inches; verify installed bushings and hardware
Before You Order
Check the original equipment label and match spring rating, unloaded eye-to-eye length, width, arch, eye/bushing dimensions and mounting arrangement. Lippert lists Standens 72-13 and Dexter compatible 072-013-00; these references do not establish fitment to every axle or RV from either brand.
The unloaded eye-to-eye length is 20.5 inches. Lippert also publishes a 21-inch Load Length field and a feature graphic marked 21 inches, while the approximate drawing labels 21.5 inches loaded. The table Load Arch Length is 2.375 without an explicit unit, while the drawing labels 3.375 inches loaded. These discrepancies remain unreconciled by the source; confirm the required loaded dimensions before ordering.
Installation Reference
RV Leaf Springs and Bushings Installation Manual CCD-0011277 covers general double-eye replacement on pages 3-5 and safety on page 2. It does not name this SKU or an exact parent axle. Use the complete instructions, appropriate support and new U-bolts and nuts; torque depends on the installed hardware and axle.
Compare a Different Spring
The 2,200-pound spring 129745 / 72-78 has a different rating and unloaded length. This is a part-number comparison, not a recommendation to substitute spring capacities.
Frequently Asked Questions
Is 1,400 pounds the axle capacity?
Lippert states a 1,400-pound spring assembly capacity. This is not a complete axle, suspension or trailer rating. Match the original equipment requirements and ratings.
Which length should I use?
The title and Eye To Eye Length field state 20.5 inches unloaded. The table Load Length field and feature graphic state 21 inches, but the approximate drawing labels 21.5 inches loaded. Lippert does not reconcile the two loaded references; confirm the required measurement and load condition before ordering.
Why are two arch measurements listed?
The table lists Load Arch Length as 2.375 without an explicit unit. The approximate drawing labels 3.375 inches loaded. Those values are not reconciled on the page; confirm the required arch against the original equipment.
What cross-reference numbers are published?
Lippert lists Standens leaf spring number 72-13 and Dexter compatible part number 072-013-00. These references do not establish fitment to every axle made by either brand.
What is included?
One double-eye spring with pre-installed nylon bushings. Pre-mounted hangers are required; hanger kits and bronze bushings are sold separately. A complete axle, suspension, wheels and separate mounting hardware are not documented as included.
Does it fit competitor axles?
Lippert states compatibility with Lippert and most competitor trailer axles but names no exact parent axle model in the focused page or linked general manual. Confirm capacity, unloaded length, width, arch, eye/bushing dimensions and mounting arrangement.
Are the shipping measurements the spring size?
No. Lippert publishes a 12 x 8.5 x 8.5-inch shipping package at 11.11 pounds. Its item fields separately list 20.5-inch length, 1.75-inch width and 9.180-pound item weight. The package data is retained as supplied and must not be used as the spring length.
Can I reuse the U-bolts?
The linked general manual CCD-0011277 says not to reuse U-bolts or nuts during double-eye spring replacement. Use correct new hardware and follow the instructions and torque specifications for the actual installed assembly.
Is the longer 2,200-pound spring interchangeable?
Spring 129745 / 72-78 has a different rating and unloaded length. It is linked for part identification only. Shared width or a similar appearance does not establish interchangeability.
| Sku | 125269 |
|---|---|
| Brand | Lippert |
| Weight capacity | 1,400 lbs. |
| Standens leaf spring number | 72-13 |
| Load length | 21" |
| Spring layer count | 4 |
| Eye to eye length | 20.5 |
| Axle spring type | Double-Eye Leaf |
| Load arch length | 2.375 |
| Axle type | Spring |
| Hardware type | Spring |
| Unit of measure | EA |
| Item length (inches) | 20.5 |
| Item width (inches) | 1.75 |
| Item weight (pounds) | 9.180 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | CHN |
| Manufacturer reference number | 125269 |
| Reference vendor/manufacturer name | Lippert |
| Dexter compatible part number | 072-013-00 |
| Upc | 848150052506 |
| Shipping dimensions | 12" L x 8.5" W x 8.5" H, 11.11 lbs. |
| Approximate drawing - loaded length | 21.5 inches; differs from table Load Length 21 inches and feature graphic 21 inches |
| Approximate drawing - loaded arch | 3.375 inches; differs from table Load Arch Length 2.375 |
| Approximate drawing - width range | 1.72 to 1.79 inches |
| Approximate drawing - eye opening callout | 0.573 to 0.603 inches; verify installed bushings and hardware |
- Is 1,400 pounds the axle capacity? Lippert states a 1,400-pound spring assembly capacity. This is not a complete axle, suspension or trailer rating. Match the original equipment requirements and ratings.
- Which length should i use? The title and Eye To Eye Length field state 20.5 inches unloaded. The table Load Length field and feature graphic state 21 inches, but the approximate drawing labels 21.5 inches loaded. Lippert does not reconcile the two loaded references; confirm the required measurement and load condition before ordering.
- Why are two arch measurements listed? The table lists Load Arch Length as 2.375 without an explicit unit. The approximate drawing labels 3.375 inches loaded. Those values are not reconciled on the page; confirm the required arch against the original equipment.
- What cross-reference numbers are published? Lippert lists Standens leaf spring number 72-13 and Dexter compatible part number 072-013-00. These references do not establish fitment to every axle made by either brand.
- What is included? One double-eye spring with pre-installed nylon bushings. Pre-mounted hangers are required; hanger kits and bronze bushings are sold separately. A complete axle, suspension, wheels and separate mounting hardware are not documented as included.
- Does it fit competitor axles? Lippert states compatibility with Lippert and most competitor trailer axles but names no exact parent axle model in the focused page or linked general manual. Confirm capacity, unloaded length, width, arch, eye/bushing dimensions and mounting arrangement.
- Are the shipping measurements the spring size? No. Lippert publishes a 12 x 8.5 x 8.5-inch shipping package at 11.11 pounds. Its item fields separately list 20.5-inch length, 1.75-inch width and 9.180-pound item weight. The package data is retained as supplied and must not be used as the spring length.
- Can i reuse the u-bolts? The linked general manual CCD-0011277 says not to reuse U-bolts or nuts during double-eye spring replacement. Use correct new hardware and follow the instructions and torque specifications for the actual installed assembly.
- Is the longer 2,200-pound spring interchangeable? Spring 129745 / 72-78 has a different rating and unloaded length. It is linked for part identification only. Shared width or a similar appearance does not establish interchangeability.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.






