Lippert 1,250-lb 3-Leaf Double-Eye Spring 72-06 - 127103
Ready to order
Lippert 1,250-lb 3-Leaf Double-Eye Spring 72-06 - 127103
---
Three-Leaf Double-Eye Spring 72-06
Lippert 127103 is one steel double-eye leaf spring rated for 1,250 pounds per spring assembly. It has three leaves, a nominal 1-3/4-inch width and a 23-1/8-inch unloaded eye-to-eye length. The manufacturer identifies it as Standens 72-06 and lists Dexter compatible part number 072-006-00.
This replacement spring flexes to absorb road shock in the matching trailer suspension. Select it by the original equipment specification and complete spring geometry; matching a capacity or a similar-looking spring alone does not establish fit. One spring is supplied, rather than a complete suspension kit.
Why Choose This Part?
- 1,250-pound spring assembly capacity; match the complete suspension ratings.
- Three-leaf steel construction flexes to absorb road shock.
- Double-eye design with included nylon bushings.
- 23-1/8-inch unloaded eye-to-eye length and 1-3/4-inch nominal width.
- Standens 72-06 and Dexter 072-006-00 identification references.
- One spring per package; hanger kits and bronze bushings sold separately.
Technical Specifications
- SKU: 127103
- Brand: Lippert
- Weight Capacity: 1,250 lbs.
- Standens Leaf Spring Number: 72-06
- Load Length: 24"
- Spring Layer Count: 3
- Eye To Eye Length: 23.125
- Axle Spring Type: Double-Eye Leaf
- Load Arch Length: 2.5
- Axle Type: Spring
- Hardware Type: Spring
- Unit of Measure: EA
- Item Length (Inches): 23.125
- Item Width (Inches): 1.75
- Item Weight (Pounds): 9.060
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- Manufacturer Reference Number: 127103
- Reference Vendor/Manufacturer Name: Lippert
- Dexter Compatible Part Number: 072-006-00
- UPC: 848150052513
- Shipping Dimensions: 10" L x 10" W x 10" H, 9.06 lbs.
Before You Order
Confirm Lippert 127103, Standens 72-06 or Dexter reference 072-006-00 against your original parts record. Verify the double-eye mounting arrangement, 23-1/8-inch unloaded eye-to-eye length, nominal 1-3/4-inch width, bushings, fasteners and required rating. An exact axle or trailer parent is not identified by the focused source.
Manufacturer arch conflict: the specification table says Load Arch Length 2.5, but the approximate-dimensions drawing labels 3.50 inches loaded. Do not assume these values describe the same geometry. Resolve the required arch with the original equipment record or manufacturer before purchase.
Related Suspension Comparison
The four-leaf 2,500-lb spring 133982 has a different rating and leaf count. It is linked for identification comparison, not as an interchangeable replacement or a way to increase the trailer rating.
What does the 1,250-pound rating mean?
It is the capacity of this spring assembly, not a new axle or trailer rating. Match the original equipment requirements and the ratings of the complete suspension.
Why are both 23-1/8 and 24 inches shown?
The product title specifies 23-1/8 inches eye-to-eye unloaded. The Load Length field and drawing state 24 inches loaded. Keep the measurement conditions distinct when comparing the original spring.
Which arch measurement is correct?
The specification table lists Load Arch Length 2.5, while the approximate-dimensions graphic labels 3.50 inches loaded. These manufacturer values conflict. Confirm the required arch with the original equipment record or manufacturer before relying on either for fitment.
What is included?
One three-leaf double-eye spring with nylon bushings. Pre-mounted hangers are required; hanger kits and bronze bushings are sold separately. A complete axle, wheels, equalizer, U-bolts and other installation hardware are not listed as included.
Which cross-reference numbers apply?
Lippert lists Standens 72-06 and Dexter compatible part number 072-006-00. Check the full reference, spring geometry, unloaded length and original suspension requirements.
Does universal fit mean it fits any axle?
No. Lippert describes broad Lippert and competitor axle use without naming an exact axle parent. Verify spring type, length, width, eyes and bushings, mounting hardware, arch and rating. Slipper springs use a different mounting arrangement.
What does the drawing show?
The approximate graphic labels a 24-inch loaded span, 3.50-inch loaded arch, 1.72–1.79-inch width, 0.573–0.603-inch eye opening and 0.030-inch maximum end-gap callout. Its arch conflicts with the 2.5 table value; the drawing is not a fit guarantee.
Are the 10-inch dimensions the spring size?
No. The source shipping package is 10 x 10 x 10 inches and 9.06 pounds. The item table separately lists 23.125-inch length, 1.75-inch width and 9.060-pound item weight. Use the spring measurements and original equipment record for selection.
Which manual applies?
The linked RV Leaf Springs and Bushings aftermarket manual covers multiple double-eye and slipper configurations. Use the procedure and fastener instructions for the actual suspension. Support the trailer as directed and use qualified service help when needed.
Manuals and Documents
| Sku | 127103 |
|---|---|
| Brand | Lippert |
| Weight capacity | 1,250 lbs. |
| Standens leaf spring number | 72-06 |
| Load length | 24" |
| Spring layer count | 3 |
| Eye to eye length | 23.125 |
| Axle spring type | Double-Eye Leaf |
| Load arch length | 2.5 |
| Axle type | Spring |
| Hardware type | Spring |
| Unit of measure | EA |
| Item length (inches) | 23.125 |
| Item width (inches) | 1.75 |
| Item weight (pounds) | 9.060 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Manufacturer reference number | 127103 |
| Reference vendor/manufacturer name | Lippert |
| Dexter compatible part number | 072-006-00 |
| Upc | 848150052513 |
| Shipping dimensions | 10" L x 10" W x 10" H, 9.06 lbs. |
- What does the 1,250-pound rating mean? It is the capacity of this spring assembly, not a new axle or trailer rating. Match the original equipment requirements and the ratings of the complete suspension.
- Why are both 23-1/8 and 24 inches shown? The product title specifies 23-1/8 inches eye-to-eye unloaded. The Load Length field and drawing state 24 inches loaded. Keep the measurement conditions distinct when comparing the original spring.
- Which arch measurement is correct? The specification table lists Load Arch Length 2.5, while the approximate-dimensions graphic labels 3.50 inches loaded. These manufacturer values conflict. Confirm the required arch with the original equipment record or manufacturer before relying on either for fitment.
- What is included? One three-leaf double-eye spring with nylon bushings. Pre-mounted hangers are required; hanger kits and bronze bushings are sold separately. A complete axle, wheels, equalizer, U-bolts and other installation hardware are not listed as included.
- Which cross-reference numbers apply? Lippert lists Standens 72-06 and Dexter compatible part number 072-006-00. Check the full reference, spring geometry, unloaded length and original suspension requirements.
- Does universal fit mean it fits any axle? No. Lippert describes broad Lippert and competitor axle use without naming an exact axle parent. Verify spring type, length, width, eyes and bushings, mounting hardware, arch and rating. Slipper springs use a different mounting arrangement.
- What does the drawing show? The approximate graphic labels a 24-inch loaded span, 3.50-inch loaded arch, 1.72–1.79-inch width, 0.573–0.603-inch eye opening and 0.030-inch maximum end-gap callout. Its arch conflicts with the 2.5 table value; the drawing is not a fit guarantee.
- Are the 10-inch dimensions the spring size? No. The source shipping package is 10 x 10 x 10 inches and 9.06 pounds. The item table separately lists 23.125-inch length, 1.75-inch width and 9.060-pound item weight. Use the spring measurements and original equipment record for selection.
- Which manual applies? The linked RV Leaf Springs and Bushings aftermarket manual covers multiple double-eye and slipper configurations. Use the procedure and fastener instructions for the actual suspension. Support the trailer as directed and use qualified service help when needed.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.






