Need a Mobile RV Tech Near You?
Connect with certified mobile RV technicians for measurement, installation, or repair — directly through RVService.PRO.
RV Techs
You
Reviewed
Service Too
---
When the electric fireplace in your RV stops working — or you're replacing an aging 30" unit — the Covenant LFP30-CT is the direct OEM replacement. This flush-mount insert delivers up to 1,500W of heat and a multi-color LED crystal flame display, operated by either the front panel or the included wireless remote. It's the same unit that shipped in hundreds of fifth wheels and travel trailers from the factory, and it's the exact part to order when your Covenant-branded fireplace fails.
Features & Specifications
- Heating output: 1,500W maximum (120V AC, 60Hz) — automatic thermal cutoff prevents overheating; flame effect runs independently without heat
- Dimensions: 30" W × 6.2" D × 17.7" H — designed for standard 30" flush-mount RV fireplace cutouts
- Flame display: Multi-color adjustable LED with rotating crystal accent; multiple intensity levels
- Controls: Front-panel physical buttons plus included wireless remote control
- Weight: 33 lb
- Model numbers: LFP30-CT / W914-30CT — the same unit with two reference numbers; use either when sourcing parts or looking up the manual
- Instruction manual: Download the W914 Installation Manual (covers 18", 26", 30", 36", 40", 48" sizes)
Who Is This Fireplace For?
This unit is for RV owners whose existing Covenant fireplace has failed, or who are installing a new electric fireplace in a 30" bay. It suits DIY owners comfortable with basic electrical hookup and RV technicians doing warranty or insurance replacements. Before ordering, measure your existing fireplace opening width — the 30" insert must fit a 30" cutout. If your cutout is a different width, see the comparison table below.
If your current fireplace is intermittent, clicks off quickly, won't heat, or has LED failures, the root cause is often the PC board or blower motor — both sold separately as Covenant OEM parts and often cheaper to replace than the full unit. See the troubleshooting guide lower on this page to diagnose first.
What it doesn't fit: Any bay narrower or wider than 30". This unit requires shore power or a generator/inverter (120V AC, minimum 2,000W inverter recommended for off-grid). It is not compatible with 12V DC-only electrical systems.
Why Choose the Covenant LFP30-CT?
The 30" width is the single most common RV fireplace cutout size, which is why the LFP30-CT drops into the original opening on most coaches without modification. The crystal display and multi-color flame settings let you run ambiance without heat year-round — useful in warm-weather camping when you want the look without adding warmth. The physical button panel plus wireless remote gives you two independent control paths, which matters when a failing remote doesn't mean a failing fireplace.
Covenant fireplaces are widely used as OEM units across a range of RV brands. Sourcing the same brand means the same mounting footprint, the same wiring connector, and the same parts ecosystem for future repairs — rather than adapting a generic unit that may not share replaceable components.
Compare Covenant Crystal Fireplace Sizes
All Covenant Crystal-series fireplaces share the same 1,500W output, LED crystal flame display, and flat front panel. Width is the only meaningful difference — match your existing opening measurement.
| Model / Part Numbers | Width | Best For | View Details |
|---|---|---|---|
| LFP26-CT / WD914-26CT | 26" | Compact travel trailers and smaller fifth wheels with 26" cutouts | View Details |
| LFP30-CT / W914-30CT (this product) | 30" | Most common size — fits the majority of RV fireplace openings | Current Product |
| LFP36-CT / WD914-36CT | 36" | Larger living areas in fifth wheels or Class A coaches with 36" openings | View Details |
| LFP40-CT / WD914-40CT | 40" | Luxury fifth wheels and motorhomes with 40" openings | View Details |
| LFP48-CT / WD914-48CT | 48" | Premium Class A coaches with 48" fireplace bays | View Details |
Sizing tip: Measure the opening width of your existing fireplace cutout before ordering. Even a 1" difference means the insert won't fit flush. The part number is usually on a label inside the fireplace cavity or on the unit itself — that's the fastest way to confirm the right size.
Technical Specifications
| Model Numbers | LFP30-CT / W914-30CT |
| Width | 30" |
| Depth | 6.2" |
| Height | 17.7" |
| Weight | 33 lb |
| Power Supply | 120V AC, 60Hz |
| Heating Output | 1,500W maximum |
| Flame Effect | Multi-color adjustable LED with crystal accent (operates independently of heat) |
| Installation Type | Flush-mount, built-in |
| Controls | Front-panel physical buttons + wireless remote control |
| SKU / Barcode | LFP30-CT/W914-30CT / WD91430CT |
What's Included
- Covenant 30" Electric RV Fireplace Insert (LFP30-CT / W914-30CT)
- Wireless remote control
- Mounting hardware and brackets
- Installation manual with wiring diagrams
Not included: Electrical wiring, circuit breaker, or decorative surround/trim. Requires an existing 120V circuit in the fireplace bay.
Compatible Parts & Accessories
If your existing Covenant 30" fireplace is malfunctioning, a replacement part is often all it takes. We stock the full Covenant OEM parts line:
- Replacement PC Board — Touchscreen models — fixes most no-power, no-function, and LED failure issues on LFP-series touchscreen units
- Replacement PC Board — Physical button models — same fix for older non-touchscreen Covenant units
- Blower motor with heating element — resolves no-heat, overheating shutdowns, and fan noise/failure
- Replacement glass front — 30" LFP30-CT / WD914-30CT — cracked or scratched front panel
- Universal remote control — Touchscreen models
- Universal remote control — Physical button models (red power button)
- Universal power cord — all Covenant models
Prefer a log-effect display instead of crystals? The Covenant LFP30-LT is the same 30" width with a touchscreen panel and log-flame effect.
Frequently Asked Questions
- Can I run the flame effect without the heater?
- Yes. The flame display and heating function operate independently. You can run the LED crystal flames at any time without the heat element — useful in warm weather when you want ambiance without adding warmth to the cabin.
- What's the difference between LFP30-CT and W914-30CT?
- They refer to the same unit. LFP30-CT is the Covenant manufacturer part number; W914-30CT is an alternate model designation. Either number works when ordering replacement parts or looking up the manual.
- How much power does this fireplace use?
- 1,500W at full heat — roughly the same as a standard space heater. Running the flame effect only draws approximately 10–15W. For off-grid use, you'll need shore power, a generator, or an inverter rated at 2,000W minimum.
- Will this fit my existing fireplace opening?
- Measure the opening width of your existing cutout. The LFP30-CT fits a 30" wide opening. If your measurement is different, see the comparison table above — we carry the same Crystal series in 26", 36", 40", and 48" widths.
- Does this come with a warranty?
- Covenant OEM parts carry a manufacturer warranty. Use our AI Live Chat for specific warranty terms and coverage details on this model.
- My fireplace won't turn on — do I need a full replacement?
- Not necessarily. Most Covenant electrical failures trace to the PC board or blower motor, both of which we sell as OEM replacement parts for significantly less than a full unit. See the troubleshooting guide below to diagnose the issue before ordering a replacement unit.
Troubleshooting Guide — Covenant LFP30-CT / W914-30CT
Use this guide to diagnose common issues before ordering a full replacement. Most failures have a specific cause and a cheaper targeted fix.
Repair videos:
Will Not Turn On or Off
Q: Won't shut off when reaching temp
Reason: PC board faulty
Solution: Replace the PC board — Touchscreen model / Physical button model
Also try: Disconnect main power for 15 minutes to allow overheat protection to reset. Note: at ambient temps below 32°F, the board requires a 30-second warm-up before heat activates; below 5°F, allow 2 minutes.
Q: Clicks on and off rapidly and stays off
Reason: Overheat protection auto-disconnect
Solution: Replace the blower motor / fan heating component
Q: Will not turn on
Reason: PC board faulty
Solution: Replace the PC board — Touchscreen / Physical button
Q: Turns on then shuts off after a few seconds
Reason: Overheat protection auto-disconnect
Solution: Replace the fan heating component
Q: Works intermittently
Reason: Set temperature too low or at a borderline threshold
Solution: Adjust the temperature setpoint higher
Q: Turns on but no functions respond
Reason: PC board faulty
Solution: Replace the PC board — Touchscreen / Physical button
Q: Won't shut off with button or remote; must cut the breaker
Reason: PC board faulty
Solution: Replace the PC board — Touchscreen / Physical button
Q: Smells hot on first use
Reason: Residual oil on the heating element wire burning off
Solution: Normal on first operation — the smell clears within the first few minutes of use
Fan and Heat Element
Q: Heating element turns red and shuts off
Reason: Fan not turning
Solution: Replace the fan heating component
Q: Noisy fan
Reason: A tie cable or wire touching the fan wheel
Solution: Open the top panel, check if any wire is contacting the fan wheel, and reposition it
Q: Heating element and fan will not turn off
Reason: PC board failure
Solution: Replace the PC board — Touchscreen / Physical button
Q: No heat and no fan
Reason: PC board failure
Solution: Replace the PC board — Touchscreen / Physical button
Flames
Q: Clicking noise when flame is rotating
Solution 1: Remove the back panel and check if the flame film is contacting the side brackets
Solution 2: Replace the synchronous motor
Q: Flames not rotating
Solution 1: Replace the fan motor
Solution 2: Replace the control board — Touchscreen / Physical button
Q: Noisy flame motor
Solution 1: Check the flicker film for obstructions
Solution 2: Replace the synchronous motor
LED Lights
Q: Half the LEDs out / LED not working / LEDs intermittent / Left or right side LED not lighting
Solution 1: Check for loose connectors on the PC board and the LED bar connection
Solution 2: Replace the LED bar
Solution 3: Replace the PC board — Touchscreen / Physical button
LCD Display
Q: LCD display not working
Solution 1: Check for loose connector on the PC board and display connection
Solution 2: Replace the display
Solution 3: Replace the PC board
Q: LCD display hanging / frozen
Solution: Reattach the display bracket springs — they may have fallen to the bottom of the unit
Why Buy from Elkhart RV Parts?
We're based in Elkhart, Indiana — the manufacturing hub of the North American RV industry. We carry the full Covenant fireplace line across multiple widths, plus the complete OEM parts library: PC boards, blower motors, glass fronts, remotes, and power cords. When your fireplace needs a repair or replacement, you're ordering from a source that stocks the same brand your coach was built with and knows the difference between a touchscreen board and a physical-button board before it ships.
| Power supply | 120V AC |
|---|---|
| Depth (inches) | 6.2 |
| Frequency (hz) | 60 |
| Width (inches) | 30 |
| Height (inches) | 17.7 |
| Power consumption (watts) | 1500 |
- What are the dimensions of the covenant 30" electric rv fireplace insert? The overall dimensions are 30 inches in width, 6.2 inches in depth, and 17.7 inches in height.
- Does the fireplace come with a remote control? Yes, the Covenant 30" Electric RV Fireplace Insert includes a remote control for convenient operation.
- What kind of heating output does this electric fireplace provide? This fireplace provides efficient heating with a robust 1500W output, suitable for warming your RV.
- Can i customize the flame settings on this fireplace? Yes, you can choose from multiple flame variations to adjust both appearance and color to suit your mood and décor.
- What power supply is required for this electric fireplace? The fireplace operates on a 120V AC power supply with a frequency of 60Hz.
Product Documents & Manuals
Need a Mobile RV Tech Near You?
Connect with certified mobile RV technicians for measurement, installation, or repair — directly through RVService.PRO.
RV Techs
You
Reviewed
Service Too
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.
Service & Replacement Parts
View All Parts & Diagrams
