Will the Irvine Slow-Rise Spring Fit a Pre-2019 RV Shade?

Answered by Elkhart RV Parts · Elkhart, Indiana · Updated August 2026
Direct Answer

Our current 1-1/4" Slow-Rise spring listing is labeled for 2019+ model-year premium shades; it does not establish fit for a pre-2019 shade. Confirm the actual Irvine shade system, identification tag, aluminum tube outside diameter, shade width and both original spring end fittings. The coach year and tube size alone do not confirm the generation or correct replacement. An exact spring for an older or unidentified shade remains unconfirmed here. Call 574-675-6919 with those details for identification help before ordering.

Compare the System and Current Catalog Options

Your shade Tube Catalog options; confirm exact fit
Confirmed premium system; listing labeled 2019+ 1-1/4" Listed Slow-Rise options — RS-SR31XS / RS-SR31S / RS-SR31SM / RS-SR31L by width
Valu-Line; generation must be confirmed 1" Listed 1" options: MRS-SR25S / MRS-SR25L. Width-only equivalence to Irvine’s chart is unconfirmed.
Valu-Line; generation must be confirmed 3/4" Listed 3/4" options: SRS-SR18S / SRS-SR18L. Width-only equivalence to Irvine’s chart is unconfirmed.
Pre-2019 premium 1-1/4" Call us first — do not order on assumption
These are identification references, not a universal year-to-part crosswalk. Irvine’s replacement-parts page separates Slow-Rise, 1" Valu-Line and 3/4" Valu-Line springs. Its Valu-Line charts have three sizes, while our current listings have two options. Do not infer an exact replacement from width alone. The spring identification guide explains the difference and keeps tube OD, shade width and spring length separate.

Identify the Installed Shade, Not Just the Coach Year

Photograph the shade identification tag and check any original component or replacement records. A coach may have replacement shades, and its model year does not prove the installed shade’s production date or spring design. Do not assume that a 2019-or-newer coach plus a 1-1/4" tube establishes fit. Measure exposed aluminum tube OD across its center, not the inside opening, fabric roll or end cap, and record shade width separately. Compare the original mechanism and both end fittings. If the identification or measurement is unclear, leave the replacement unconfirmed; do not round to a nearby tube size or dismantle a tensioned spring for a measurement. Follow the correct manufacturer procedure or use qualified help.

Ask for identification help before ordering.

Call 574-675-6919 or email help@elkhartrvparts.com

Include the shade tag, clear tube-OD measurement, shade width and both original end fittings. A photo helps identification but does not guarantee a match.