Which Irvine Replacement Spring Fits My RV Roller Shade?

Answered by Elkhart RV Parts · Elkhart, Indiana · Updated August 2026
Direct Answer

Confirm the Irvine shade system, tube outside diameter, shade width and original spring/end fittings before choosing a replacement. Our current listings distinguish 1-1/4" Slow-Rise premium springs from 1" and 3/4" Valu-Line springs. Tube diameter narrows the family; it does not establish the generation or exact spring match. The Slow-Rise listing is labeled for 2019+ model-year shades. Check current prices and availability on the product page.

Current Catalog Spring Options

Listed shade width (left to right) Size Spring length Part number
1-1/4" tube — Slow-Rise premium shades (2019+ model year)
9" – 19" Extra Small 9" RS-SR31XS
20" – 29" Small 13.5" RS-SR31S
30" – 59" Medium 18.5" RS-SR31SM
60" and wider Large 23" RS-SR31L
1" tube — Valu-Line shades
9" – 29" Small 15" MRS-SR25S
30" and wider Large 24" MRS-SR25L
3/4" tube — Valu-Line shades
Up to 40" Short 14.75" SRS-SR18S
Over 40" Long 24" SRS-SR18L
Retractable RV shower door
Confirm shower-screen system and end fittings Separate shower-screen spring — SRS-WOP
Read these as product-listing size labels, not a universal fitment chart. The part numbers and total spring lengths above come from our current variants. Irvine’s replacement-parts charts show the same Slow-Rise width bands, but show Small/Medium/Large Valu-Line bands of 20–29", 30–59" and 60" or wider for both Valu-Line tube sizes. Those do not match our two-option Valu-Line listings. A verified crosswalk between those charts and these specific Valu-Line part numbers is not established here. Confirm the original assembly before ordering, especially for an older shade, an intermediate width or a different spring design.

How to Measure the Roller Tube Outside Diameter

Measure the aluminum tube itself, outside edge to outside edge. The 3/4", 1", and 1-1/4" families in this chart refer to the tube's outside diameter (OD), not the hole inside it.

  1. Find an exposed, undamaged part of the aluminum tube. Measure the tube the fabric wraps around, not the fabric roll, bracket, end cap, or top mounting rail. Do not detach attached fabric or dismantle the spring just to take this measurement.
  2. Use calipers or a rigid ruler. With calipers, place the outside-measuring jaws against opposite outside surfaces of the tube. With a ruler, look straight at the tube end and measure across its center from one outer edge to the opposite outer edge. Align the zero mark with the first edge; do not assume the ruler's physical end is zero.
  3. Keep the reading square and visible. Do not measure diagonally or wrap a flexible tape around the tube; that gives a different measurement. For a photo, show the tube end straight on with both outside edges and the ruler marks or caliper reading visible. Coin comparisons and top-rail dimensions are clues, not a substitute for a clear OD reading.
  4. Record shade width separately. Tube OD is the short distance across the round tube. Shade width is the left-to-right measurement across the shade; spring length is the length of the spring assembly. They are not interchangeable measurements. Compare the width with the relevant listing only after confirming the system and original spring; see the manufacturer-chart difference above.

If the reading is unclear or falls between the listed sizes, do not round it to the nearest family. Send a clear measurement photo and the shade's identification tag, if available, to help@elkhartrvparts.com or call 574-675-6919 before ordering. A measurement photo helps identification; it does not by itself guarantee fitment. The 1-1/4" premium spring listing is labeled for 2019+ model-year shades; this is not proof of an older shade’s compatibility. Use the correct manufacturer procedure or qualified help for tensioned spring work.

Order the Right Spring

Not sure which one you have?

Call 574-675-6919 or email help@elkhartrvparts.com

Send clear photos of the shade tag, measured tube end and both original spring fittings. These help identification but do not guarantee a match.