MORryde TV10-F-35H Rigid Snap-In TV Wall Mount - 35 lb
Ready to order
MORryde TV10-F-35H Rigid Snap-In TV Wall Mount - 35 lb
---
MORryde TV10-F-35H is a rigid snap-in TV wall mount rated for a TV up to 35 lb. The TV remains bolted to its bracket when detached from the portable wall mounting plate. Match the actual model label, TV weight, VESA holes and supporting structure; screen size or appearance alone does not establish fit.
- Rigid TV10-F-35H snap-in wall mount; 35 lb maximum TV weight
- VERSION 2 VESA: 75×75, 100×100, 100×200 and 200×200 mm; verify actual TV holes
- TV bracket stays bolted to TV when detached; vertical support must hold five times combined weight
- Catalog depth 2 inches conflicts with page’s 12.1 inches; verify actual revision, docking engagement and transport instructions
TV mounting pattern
The current TV10-F-35H manual, marked VERSION 2, lists 75×75, 100×100, 100×200 and 200×200 mm VESA patterns. MORryde’s product page instead lists 100×150 among its patterns. Follow the exact manual and verify the actual TV and plate holes; 100×150 compatibility is not confirmed by the reviewed manual. Match TV screw thread, permitted insertion depth and rear recess. An exact adapter or TV-model pairing has not been established.
Rigid function and gallery limits
The exact current manual describes a rigid wall mount with a quick snap-in mechanism. It does not specify an extension arm or viewing swivel/tilt range. Angling the TV/bracket during attachment or removal is not a documented adjustable viewing range. One retained gallery view appears to show an articulated extension assembly; do not use that image to assume TV10-F-35H has the separate TV10-E-35H’s extension function. Actual supplied revision and that gallery discrepancy remain unconfirmed.
TV bracket and portable wall plate
The current manual separates the Portable Mounting Plate, which fixes to the vertical supporting surface, from the TV Bracket, which bolts to the TV. Attach the bracket-and-TV assembly to the portable plate using the illustrated install/installed/remove sequence: engage the upper connection and seat the lower connection. Support the TV during attachment or removal and verify full engagement. Detaching this assembly does not require unscrewing the TV’s VESA bolts.
Vertical support and wall fasteners
Install on a vertical supporting surface capable of five times the combined TV-and-mount weight; reinforcement may be needed. The manual excludes brick, concrete and concrete block. Keep the illustrated wall-plate arrow upright. VERSION 2 Step 1 calls for 1/8-inch pilot holes and 1/4-inch lag bolts with 1/4-inch washers. Verify structural engagement and fastener length for the actual installation. Ceiling or countertop mounting is not established for TV10-F-35H.
Current manual hardware
The current manual lists a Portable Mounting Plate, TV Bracket and hardware pack. It illustrates four each M4×12, M5×12 and M6×12 mm TV bolts; eight 1/4×1 inch lag bolts; and eight each M6, #10 and 1/4-inch flat washers. Use the TV’s specified thread and allowed insertion depth; hardware too long can puncture exterior structure. Actual supplied pack, revision and any additional spacers or hardware needed by the TV remain unconfirmed.
Older instructions and revision differences
The retained older TV10-F-35H instructions also specify 35 lb and VESA up to 200×200 mm, but illustrate M4/M5×12/30 and M6/M8×12/35 mm TV bolts, lock washers and optional spacers. Their wall-fastener illustration includes self-drilling screws and lag bolts, while Step 1 refers to flat-head screws. The current VERSION 2 instructions instead specify lag bolts and washers in Step 1. These are revision differences; do not treat either illustrated pack as proof of the hardware supplied with every unit. Use the instructions matching the actual unit.
Dimensions and cable clearance
Archived MORryde catalog page 22 gives TV10-F-35H overall dimensions of 9.8 W × 8.8 H × 2 D inches. The current product page instead prints 9.84 W × 8.88 H × 12.1 D inches. The depth difference is unresolved; 12.1 inches is not established as the installed projection of this rigid mount. Check the actual assembly and supplied revision before planning fit, rear-TV clearance or cable routing. These are not certified packed dimensions, and retained shipping weight and operational measurement fields were not independently verified by this review.
Docking engagement and transport
The snap-in connection permits removal; it does not by itself prove the TV is secure during vehicle movement. The reviewed manuals illustrate engagement/removal but do not give a detailed transport-restraint or release-control operating procedure. Verify the TV bracket is fully seated, fasteners and support are secure, and use the exact unit’s transport instructions before travel. Do not borrow another model’s chain-release, extension-arm latch or travel-lock sequence. Exact replacement springs, latch and restraint part numbers remain unconfirmed.
Extra wall plate and service parts
The term “Portable Mounting Plate” describes the detachable wall interface; it does not establish that two docking plates are included. An exact extra wall-plate part number, supplied quantity beyond the listed assembly, or interchangeable plate between TV10-F-35H, TV10-E-35H, TV10-S-35H and TV5 portable mounts was not established. Similar snap-in appearance is not proof of fit. Existing selector links compare separate designs rather than approve shared hardware or drop-in replacement.
Instructions by revision
TV10-F-35H current MORryde instructions — VERSION 2 · TV10-F-35H older instructions — hardware revision reference · Archived MORryde catalog, page 22
Compare separate TV mount designs
These links compare designs and do not establish interchangeable plates, hardware or replacement fit.
| Weight capacity (pounds) | 35 |
|---|---|
| Mounting function | Rigid snap-in wall mount; extension or adjustable viewing angles not specified |
| Vesa patterns in version 2 manual (mm) | 75×75; 100×100; 100×200; 200×200 |
| Vesa source conflict | The current TV10-F-35H manual, marked VERSION 2, lists 75×75, 100×100, 100×200 and 200×200 mm VESA patterns. MORryde’s product page instead lists 100×150 among its patterns. Follow the exact manual and verify the actual TV and plate holes; 100×150 compatibility is not confirmed by the reviewed manual. Match TV screw thread, permitted insertion depth and rear recess. An exact adapter or TV-model pairing has not been established. |
| Archived overall dimensions (w × h × d inches) | 9.8 × 8.8 × 2 — archived MORryde catalog |
| Dimension and clearance limits | Archived MORryde catalog page 22 gives TV10-F-35H overall dimensions of 9.8 W × 8.8 H × 2 D inches. The current product page instead prints 9.84 W × 8.88 H × 12.1 D inches. The depth difference is unresolved; 12.1 inches is not established as the installed projection of this rigid mount. Check the actual assembly and supplied revision before planning fit, rear-TV clearance or cable routing. These are not certified packed dimensions, and retained shipping weight and operational measurement fields were not independently verified by this review. |
| Tv bracket and wall plate | The current manual separates the Portable Mounting Plate, which fixes to the vertical supporting surface, from the TV Bracket, which bolts to the TV. Attach the bracket-and-TV assembly to the portable plate using the illustrated install/installed/remove sequence: engage the upper connection and seat the lower connection. Support the TV during attachment or removal and verify full engagement. Detaching this assembly does not require unscrewing the TV’s VESA bolts. |
| Supporting surface and orientation | Install on a vertical supporting surface capable of five times the combined TV-and-mount weight; reinforcement may be needed. The manual excludes brick, concrete and concrete block. Keep the illustrated wall-plate arrow upright. VERSION 2 Step 1 calls for 1/8-inch pilot holes and 1/4-inch lag bolts with 1/4-inch washers. Verify structural engagement and fastener length for the actual installation. Ceiling or countertop mounting is not established for TV10-F-35H. |
| Current manual hardware | The current manual lists a Portable Mounting Plate, TV Bracket and hardware pack. It illustrates four each M4×12, M5×12 and M6×12 mm TV bolts; eight 1/4×1 inch lag bolts; and eight each M6, #10 and 1/4-inch flat washers. Use the TV’s specified thread and allowed insertion depth; hardware too long can puncture exterior structure. Actual supplied pack, revision and any additional spacers or hardware needed by the TV remain unconfirmed. |
| Older manual and actual pack | The retained older TV10-F-35H instructions also specify 35 lb and VESA up to 200×200 mm, but illustrate M4/M5×12/30 and M6/M8×12/35 mm TV bolts, lock washers and optional spacers. Their wall-fastener illustration includes self-drilling screws and lag bolts, while Step 1 refers to flat-head screws. The current VERSION 2 instructions instead specify lag bolts and washers in Step 1. These are revision differences; do not treat either illustrated pack as proof of the hardware supplied with every unit. Use the instructions matching the actual unit. |
| Rigid function and gallery limit | The exact current manual describes a rigid wall mount with a quick snap-in mechanism. It does not specify an extension arm or viewing swivel/tilt range. Angling the TV/bracket during attachment or removal is not a documented adjustable viewing range. One retained gallery view appears to show an articulated extension assembly; do not use that image to assume TV10-F-35H has the separate TV10-E-35H’s extension function. Actual supplied revision and that gallery discrepancy remain unconfirmed. |
| Transport and release limits | The snap-in connection permits removal; it does not by itself prove the TV is secure during vehicle movement. The reviewed manuals illustrate engagement/removal but do not give a detailed transport-restraint or release-control operating procedure. Verify the TV bracket is fully seated, fasteners and support are secure, and use the exact unit’s transport instructions before travel. Do not borrow another model’s chain-release, extension-arm latch or travel-lock sequence. Exact replacement springs, latch and restraint part numbers remain unconfirmed. |
| Extra docking plate and service parts | The term “Portable Mounting Plate” describes the detachable wall interface; it does not establish that two docking plates are included. An exact extra wall-plate part number, supplied quantity beyond the listed assembly, or interchangeable plate between TV10-F-35H, TV10-E-35H, TV10-S-35H and TV5 portable mounts was not established. Similar snap-in appearance is not proof of fit. Existing selector links compare separate designs rather than approve shared hardware or drop-in replacement. |
- What is the weight capacity of the morryde tv10-f-35h tv mount? MORryde TV10-F-35H is a rigid snap-in TV wall mount rated for a TV up to 35 lb. The TV remains bolted to its bracket when detached from the portable wall mounting plate. Match the actual model label, TV weight, VESA holes and supporting structure; screen size or appearance alone does not establish fit.
- Does this tv mount support vesa mounting patterns? The current TV10-F-35H manual, marked VERSION 2, lists 75×75, 100×100, 100×200 and 200×200 mm VESA patterns. MORryde’s product page instead lists 100×150 among its patterns. Follow the exact manual and verify the actual TV and plate holes; 100×150 compatibility is not confirmed by the reviewed manual. Match TV screw thread, permitted insertion depth and rear recess. An exact adapter or TV-model pairing has not been established.
- What are the dimensions of the morryde tv10-f-35h tv mount? Archived MORryde catalog page 22 gives TV10-F-35H overall dimensions of 9.8 W × 8.8 H × 2 D inches. The current product page instead prints 9.84 W × 8.88 H × 12.1 D inches. The depth difference is unresolved; 12.1 inches is not established as the installed projection of this rigid mount. Check the actual assembly and supplied revision before planning fit, rear-TV clearance or cable routing. These are not certified packed dimensions, and retained shipping weight and operational measurement fields were not independently verified by this review.
- Is the tv mounting plate detachable from the wall mount? The current manual separates the Portable Mounting Plate, which fixes to the vertical supporting surface, from the TV Bracket, which bolts to the TV. Attach the bracket-and-TV assembly to the portable plate using the illustrated install/installed/remove sequence: engage the upper connection and seat the lower connection. Support the TV during attachment or removal and verify full engagement. Detaching this assembly does not require unscrewing the TV’s VESA bolts.
- What comes included in the package with this tv mount? The current manual lists a Portable Mounting Plate, TV Bracket and hardware pack. It illustrates four each M4×12, M5×12 and M6×12 mm TV bolts; eight 1/4×1 inch lag bolts; and eight each M6, #10 and 1/4-inch flat washers. Use the TV’s specified thread and allowed insertion depth; hardware too long can puncture exterior structure. Actual supplied pack, revision and any additional spacers or hardware needed by the TV remain unconfirmed. The retained older TV10-F-35H instructions also specify 35 lb and VESA up to 200×200 mm, but illustrate M4/M5×12/30 and M6/M8×12/35 mm TV bolts, lock washers and optional spacers. Their wall-fastener illustration includes self-drilling screws and lag bolts, while Step 1 refers to flat-head screws. The current VERSION 2 instructions instead specify lag bolts and washers in Step 1. These are revision differences; do not treat either illustrated pack as proof of the hardware supplied with every unit. Use the instructions matching the actual unit.
- Does tv10-f-35h extend or swivel, and how should it be secured for travel? The exact current manual describes a rigid wall mount with a quick snap-in mechanism. It does not specify an extension arm or viewing swivel/tilt range. Angling the TV/bracket during attachment or removal is not a documented adjustable viewing range. One retained gallery view appears to show an articulated extension assembly; do not use that image to assume TV10-F-35H has the separate TV10-E-35H’s extension function. Actual supplied revision and that gallery discrepancy remain unconfirmed. The snap-in connection permits removal; it does not by itself prove the TV is secure during vehicle movement. The reviewed manuals illustrate engagement/removal but do not give a detailed transport-restraint or release-control operating procedure. Verify the TV bracket is fully seated, fasteners and support are secure, and use the exact unit’s transport instructions before travel. Do not borrow another model’s chain-release, extension-arm latch or travel-lock sequence. Exact replacement springs, latch and restraint part numbers remain unconfirmed.
- What support does tv10-f-35h need, and can i use an extra docking plate? Install on a vertical supporting surface capable of five times the combined TV-and-mount weight; reinforcement may be needed. The manual excludes brick, concrete and concrete block. Keep the illustrated wall-plate arrow upright. VERSION 2 Step 1 calls for 1/8-inch pilot holes and 1/4-inch lag bolts with 1/4-inch washers. Verify structural engagement and fastener length for the actual installation. Ceiling or countertop mounting is not established for TV10-F-35H. The term “Portable Mounting Plate” describes the detachable wall interface; it does not establish that two docking plates are included. An exact extra wall-plate part number, supplied quantity beyond the listed assembly, or interchangeable plate between TV10-F-35H, TV10-E-35H, TV10-S-35H and TV5 portable mounts was not established. Similar snap-in appearance is not proof of fit. Existing selector links compare separate designs rather than approve shared hardware or drop-in replacement.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.







