MORryde TV1-012H Base or Ceiling TV Mount - 25 lb
Ready to order
MORryde TV1-012H Base or Ceiling TV Mount - 25 lb
---
MORryde TV1-012H is a base-or-ceiling TV mount with a 25 lb maximum TV weight. Its exact manual supports reinforced under-cabinet/ceiling installation and reversed counter/desktop installation. Match the TV, actual mount revision, hardware and structural support before ordering.
MORryde’s current product page advertises up to 28-inch TVs, while its Version 2 manual lists 15–19-inch flat-panel TVs. These size statements differ. Confirm the actual mount revision and TV with MORryde before relying on the larger size claim; the 25 lb maximum, VESA holes, screw requirements and screen clearance must also match. The current product page and Version 2 manual list 75×75 and 100×100 mm VESA. Other hole spacings, adapters, TV models and cross-model plate interchangeability are unconfirmed; a shared brand or rating is not fitment evidence.
Motion and dimensions: The current page and Version 2 manual specify up to 360° swivel. The page lists 0–10.5° tilt, while the manual lists 0–10° for most applications. Match the actual revision and physical clearance; do not assume unrestricted screen rotation or cable travel. MORryde’s product page gives overall dimensions of 11.5 inches high × 6.5 inches wide × 4.5 inches deep. Check the full screen and cable sweep in the intended orientation; these mount dimensions do not certify clearance for a particular TV.
Features & Specifications
- Brand: MORryde
- SKU: TV1-012H
- Part Number: TV1-012H
- Product Family: MORryde RV TV Mounts
- Capacity: 25 lbs
- Shipping Weight: 6.2891 lb
- Product Type: RV TV Mounts
- Application: reinforced ceiling/under-cabinet or reversed counter/desktop installation, as shown in the exact manual; match TV weight, VESA, hardware and clearance.
Why Choose TV1-012H?
TV1-012H mounts to a reinforced horizontal surface: beneath a reinforced ceiling/cabinet or reversed upright on a counter/desktop. Version 2 explicitly diagrams both orientations. The surface must support five times the combined TV-and-mount weight; the manual excludes brick, concrete and concrete block. Verify the actual structure and fastener engagement rather than assuming thin cabinetry is adequate.
Attachment and travel: The manual shows bolting the TV directly to the mounting plate. Side knobs are loosened to set tilt and then tightened; the rear knob controls swivel and is tightened after adjustment. It is not documented as a snap-in, lift-off or flip-down assembly. The manual lists a secure travel lock but does not establish a separate replacement lock part number or universal travel position; verify the actual revision’s secure setup before travel. Lifting the TV safely may require two people.
Compare MORryde RV TV Mounts
These existing links compare other MORryde products. They do not establish compatible replacement plates, adapters, brackets or hardware; each model needs its own installation and interface evidence.
| Model / Part | Category | Best For | View Details |
|---|---|---|---|
|
TV1-012H Base or Ceiling TV Mount - 25 lb. capacity - TV1-012H |
RV TV Mounts | mounting or securing an RV TV after matching VESA pattern, weight rating, and mount style | Current Product |
| TV1-051H Snap-In TV Mount - 25 lb. capacity - TV1-051H |
RV TV Mounts | mounting or securing an RV TV after matching VESA pattern, weight rating, and mount style | View Details |
| TV1-048H Snap-In TV Mount - 35 lb. capacity - TV1-048H |
RV TV Mounts | mounting or securing an RV TV after matching VESA pattern, weight rating, and mount style | View Details |
| TV10-S-35H Snap-In TV Mount - 35 lb. capacity - TV10-S-35H |
RV TV Mounts | mounting or securing an RV TV after matching VESA pattern, weight rating, and mount style | View Details |
Fitment limit: similar appearance, shared brand or a matching nominal capacity does not certify interchangeable components.
Technical Specifications
| Brand | MORryde |
| SKU | TV1-012H |
| Part Number | TV1-012H |
| Product Family | MORryde RV TV Mounts |
| Capacity | 25 lbs |
| Shipping Weight | 6.2891 lb |
| Product Type | RV TV Mounts |
Measurement note: native package/catalog measurements and shipping weights are retained for operations; they are not independently certified installed geometry, delivered weight or extra TV capacity. Use the source-labelled overall dimensions above.
What's Included
The existing listing identifies the TV mount, installation hardware and instructions. Version 2 illustrates M4/M5/M6 × 12 mm TV bolts, 1/4 × 1 inch lag bolts and washers. Select TV screw thread and insertion depth from the television’s instructions and mounting fasteners for the reinforced structure. Overlong hardware can puncture structures. The actual supplied pack and delivery assembly state are not independently confirmed; do not assume every TV screw or all reinforcement materials are included.
Compatible Models & Alternatives
The current product page and Version 2 manual list 75×75 and 100×100 mm VESA. Other hole spacings, adapters, TV models and cross-model plate interchangeability are unconfirmed; a shared brand or rating is not fitment evidence. No exact separate TV plate, base plate, tilt/swivel knob, lock or hardware-pack service number was established. A diagram label names an assembly component, not an orderable replacement part.
Frequently Asked Questions
- How do I confirm this is the right MORryde part?
- Match exact model TV1-012H and the actual revision, 25 lb maximum TV weight and native 75×75/100×100 mm VESA. MORryde’s current product page advertises up to 28-inch TVs, while its Version 2 manual lists 15–19-inch flat-panel TVs. These size statements differ. Confirm the actual mount revision and TV with MORryde before relying on the larger size claim; the 25 lb maximum, VESA holes, screw requirements and screen clearance must also match.
- What should I measure before ordering?
- Check the reinforced mounting surface, TV weight, hole spacing, screw thread/insertion depth, intended orientation and the entire screen/cable sweep. TV1-012H mounts to a reinforced horizontal surface: beneath a reinforced ceiling/cabinet or reversed upright on a counter/desktop. Version 2 explicitly diagrams both orientations. The surface must support five times the combined TV-and-mount weight; the manual excludes brick, concrete and concrete block. Verify the actual structure and fastener engagement rather than assuming thin cabinetry is adequate.
- Can I substitute a similar MORryde product?
- No automatic substitution is established. The current product page and Version 2 manual list 75×75 and 100×100 mm VESA. Other hole spacings, adapters, TV models and cross-model plate interchangeability are unconfirmed; a shared brand or rating is not fitment evidence.
- What do buyers usually pair with this part?
- No particular companion purchase is established. Version 2 illustrates M4/M5/M6 × 12 mm TV bolts, 1/4 × 1 inch lag bolts and washers. Select TV screw thread and insertion depth from the television’s instructions and mounting fasteners for the reinforced structure. Overlong hardware can puncture structures. The actual supplied pack and delivery assembly state are not independently confirmed; do not assume every TV screw or all reinforcement materials are included.
- Can it mount under a cabinet or upright on a desk?
- TV1-012H mounts to a reinforced horizontal surface: beneath a reinforced ceiling/cabinet or reversed upright on a counter/desktop. Version 2 explicitly diagrams both orientations. The surface must support five times the combined TV-and-mount weight; the manual excludes brick, concrete and concrete block. Verify the actual structure and fastener engagement rather than assuming thin cabinetry is adequate.
- Does it flip down or release like a snap-in mount?
- The manual shows bolting the TV directly to the mounting plate. Side knobs are loosened to set tilt and then tightened; the rear knob controls swivel and is tightened after adjustment. It is not documented as a snap-in, lift-off or flip-down assembly. The manual lists a secure travel lock but does not establish a separate replacement lock part number or universal travel position; verify the actual revision’s secure setup before travel. Lifting the TV safely may require two people.
- Which size and tilt claims should I follow?
- MORryde’s current product page advertises up to 28-inch TVs, while its Version 2 manual lists 15–19-inch flat-panel TVs. These size statements differ. Confirm the actual mount revision and TV with MORryde before relying on the larger size claim; the 25 lb maximum, VESA holes, screw requirements and screen clearance must also match. The current page and Version 2 manual specify up to 360° swivel. The page lists 0–10.5° tilt, while the manual lists 0–10° for most applications. Match the actual revision and physical clearance; do not assume unrestricted screen rotation or cable travel.
Why Buy from Elkhart RV Parts?
Elkhart RV Parts focuses on hard-to-find RV service parts with clear part-number identification, practical fitment notes, and fast support from a team located in Elkhart, Indiana.
| Depth (inches) | 4.5 |
|---|---|
| Width (inches) | 6.5 |
| Height (inches) | 11.5 |
| Tilt range (degrees) | Version2 manual0–10; productpage0–10.5. Confirm actual revision/clearance. |
| Swivel range (degrees) | 360 |
| Product weight (pounds) | 6 |
| Maximum tv size (inches) | Unresolved source difference: Version2 manual15–19; productpageup28. Confirm actual TV/revision. |
| Weight capacity (pounds) | 25 |
| Vesa mounting pattern 1 (millimeters) | 75x75 |
| Vesa mounting pattern 2 (millimeters) | 100x100 |
| Installation and reinforcement | TV1-012H mounts to a reinforced horizontal surface: beneath a reinforced ceiling/cabinet or reversed upright on a counter/desktop. Version 2 explicitly diagrams both orientations. The surface must support five times the combined TV-and-mount weight; the manual excludes brick, concrete and concrete block. Verify the actual structure and fastener engagement rather than assuming thin cabinetry is adequate. |
| Tv attachment and travel | The manual shows bolting the TV directly to the mounting plate. Side knobs are loosened to set tilt and then tightened; the rear knob controls swivel and is tightened after adjustment. It is not documented as a snap-in, lift-off or flip-down assembly. The manual lists a secure travel lock but does not establish a separate replacement lock part number or universal travel position; verify the actual revision’s secure setup before travel. Lifting the TV safely may require two people. |
| Hardware and assembly qualification | Version 2 illustrates M4/M5/M6 × 12 mm TV bolts, 1/4 × 1 inch lag bolts and washers. Select TV screw thread and insertion depth from the television’s instructions and mounting fasteners for the reinforced structure. Overlong hardware can puncture structures. The actual supplied pack and delivery assembly state are not independently confirmed; do not assume every TV screw or all reinforcement materials are included. |
| Native measurement qualification | Existing Product Weight and native operational dimensions retained; not independently verified installed dimensions or delivered weight. Current primary page gives overall11.5Hx6.5Wx4.5D. |
| Service parts and adapters | No exact separate plate/base/knob/lock/hardware-pack PN, adapter interface, TVmodel or crossmodel fit confirmed. |
- What is the maximum weight capacity for the morryde tv1-012h tv mount? Maximum TV weight is 25 lb. Also match the actual revision, reinforced structure, VESA holes, TV screws and clearance.
- Can the morryde tv1-012h mount swivel and tilt? The current page and Version 2 manual specify up to 360° swivel. The page lists 0–10.5° tilt, while the manual lists 0–10° for most applications. Match the actual revision and physical clearance; do not assume unrestricted screen rotation or cable travel.
- What size tvs are compatible with the morryde tv1-012h mount? MORryde’s current product page advertises up to 28-inch TVs, while its Version 2 manual lists 15–19-inch flat-panel TVs. These size statements differ. Confirm the actual mount revision and TV with MORryde before relying on the larger size claim; the 25 lb maximum, VESA holes, screw requirements and screen clearance must also match.
- What vesa mounting patterns does the morryde tv1-012h support? The current product page and Version 2 manual list 75×75 and 100×100 mm VESA. Other hole spacings, adapters, TV models and cross-model plate interchangeability are unconfirmed; a shared brand or rating is not fitment evidence.
- What comes included in the box when purchasing the morryde tv1-012h tv mount? Version 2 illustrates M4/M5/M6 × 12 mm TV bolts, 1/4 × 1 inch lag bolts and washers. Select TV screw thread and insertion depth from the television’s instructions and mounting fasteners for the reinforced structure. Overlong hardware can puncture structures. The actual supplied pack and delivery assembly state are not independently confirmed; do not assume every TV screw or all reinforcement materials are included.
- Can i install this mount on a ceiling or a desktop? TV1-012H mounts to a reinforced horizontal surface: beneath a reinforced ceiling/cabinet or reversed upright on a counter/desktop. Version 2 explicitly diagrams both orientations. The surface must support five times the combined TV-and-mount weight; the manual excludes brick, concrete and concrete block. Verify the actual structure and fastener engagement rather than assuming thin cabinetry is adequate.
- How is the tv attached and secured for travel? The manual shows bolting the TV directly to the mounting plate. Side knobs are loosened to set tilt and then tightened; the rear knob controls swivel and is tightened after adjustment. It is not documented as a snap-in, lift-off or flip-down assembly. The manual lists a secure travel lock but does not establish a separate replacement lock part number or universal travel position; verify the actual revision’s secure setup before travel. Lifting the TV safely may require two people.
Product Documents & Manuals
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.



