Lippert Under-Chassis Sliding Bike Rack, No Jack - 126890
Ready to order
Lippert Under-Chassis Sliding Bike Rack, No Jack - 126890
---
Lippert Sliding Bike Rack without Jack - 126890
Lippert 126890 is an under-chassis sliding bike rack supplied without a jack. The powder-coated steel rack slides outward to provide access to a bicycle-storage platform and uses a latch-pin locking arrangement. Lippert lists a 200-lb capacity and identifies Heartland 58861 and Keystone RV 262644 as OEM references.
One sliding rack is listed per package. Cargo mounts and a trim kit are marked as not included, and the without-jack product designation is explicit. Bicycles, a spare tire, tie-down straps and a complete vehicle mounting kit are not established as supplied by the product photo or the stated specifications.
Why Choose This Sliding Rack?
- Access: Under-chassis slide-out bicycle storage arrangement.
- Capacity: 200-lb capacity; read the actual rack label before loading.
- Construction: Powder-coated steel frame.
- Configuration: Latch-pin lock and without-jack configuration.
Technical Specifications
- SKU: 126890
- Brand: Lippert
- Cargo Trim Kit Included: No
- Cargo Mounts Included: No
- Cargo Rack Features: Slide-Out
- Hitch Size: 1-5/8"
- Cargo Locking Method: Latch Pin
- Cargo Rack Style: Slide
- Storage Application: Bikes
- Cargo Mounting Location: Under Chassis
- Weight Capacity: 200 lbs.
- Unit of Measure: EA
- Country of Origin: CHN
- Quantity In Package: 1
- Warranty Term: 1 Year
- Item Length (Inches): 66.5
- Item Width (Inches): 20
- Item Height (Inches): 4.5
- Heartland Part Number: 58861
- Keystone RV Part Number: 262644
- Shipping Dimensions: 68.2" L x 24" W x 24" H, 108 lbs.
Before You Order
Match the original part identification and chassis mounting arrangement, not only the generic bike-rack description. Lippert says bracket mounts should be flush to the end of the coach I-beam frame and the outside of the I-beam flange. Verify bracket availability, frame geometry, clearances and installed travel before ordering. The page lists a 1-5/8-inch hitch-size field but identifies an under-chassis mounting location; do not select it as a standard receiver-hitch rack solely from that field.
The manufacturer title calls this a 68-1/2-inch rack, while the specification table gives item measurements of 66.5 x 20 x 4.5 inches. Shipping measurements are separately listed as 68.2 x 24 x 24 inches at 108 lbs. These differing manufacturer references are not a confirmed mounting drawing; obtain the exact installation measurements if your chassis clearance depends on them.
Operating Guide and Load Planning
TI-095 explicitly names 126890 as the sliding bike rack without jack. The three-page guide shows removing the retaining pins and cane bolts on both sides before extending the rack by its bumper, then replacing the retaining hardware. It warns against pulling the rack out by a spare-tire carrier. The upright support must be pinned securely, and suitable bicycle restraints are separate supplies.
Use the load label on the actual rack. Lippert describes its 200-lb figure as additional to a spare tire on applicable configurations; that wording does not confirm that a spare-tire carrier is included with this SKU or establish a universal combined-load allowance. A separate Import Bike Rack manual in the support collection describes other mounting assemblies and is not treated as an exact installation procedure for 126890.
Manuals and Documents
| Sku | 126890 |
|---|---|
| Brand | Lippert |
| Cargo trim kit included | No |
| Cargo mounts included | No |
| Cargo rack features | Slide-Out |
| Hitch size | 1-5/8" |
| Cargo locking method | Latch Pin |
| Cargo rack style | Slide |
| Storage application | Bikes |
| Cargo mounting location | Under Chassis |
| Weight capacity | 200 lbs. |
| Unit of measure | EA |
| Country of origin | CHN |
| Quantity in package | 1 |
| Warranty term | 1 Year |
| Item length (inches) | 66.5 |
| Item width (inches) | 20 |
| Item height (inches) | 4.5 |
| Heartland part number | 58861 |
| Keystone rv part number | 262644 |
| Shipping dimensions | 68.2" L x 24" W x 24" H, 108 lbs. |
- Is a jack included? No. Lippert identifies SKU 126890 as the sliding bike rack without jack.
- What are the manufacturer size references? The manufacturer title calls this a 68-1/2-inch rack, while the specification table gives item measurements of 66.5 x 20 x 4.5 inches. Shipping measurements are separately listed as 68.2 x 24 x 24 inches at 108 lbs. These differing manufacturer references are not a confirmed mounting drawing; obtain the exact installation measurements if your chassis clearance depends on them.
- Are cargo mounts and restraints included? The table marks cargo mounts as not included. TI-095 says bicycle restraints such as straps are not included.
- Does the manual identify this part? Yes. TI-095 explicitly identifies 126890 as the sliding bike rack without jack and explains manual extension and securing the support tube.
- How should the rack be extended? Follow the full TI-095 instructions: release the retaining hardware on both sides, pull by the rack bumper and reinstall the retaining hardware. Do not pull by a spare tire carrier.
- How much can it carry? Use the load label on the actual rack. Lippert describes its 200-lb figure as additional to a spare tire on applicable configurations; that wording does not confirm that a spare-tire carrier is included with this SKU or establish a universal combined-load allowance. A separate Import Bike Rack manual in the support collection describes other mounting assemblies and is not treated as an exact installation procedure for 126890.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


