Lippert Ground Control Front Hall Effect Jack - 305340
Ready to order
Lippert Ground Control Front Hall Effect Jack - 305340
---
Lippert Ground Control Front Hall Effect Jack - 305340
Lippert 305340 replaces either front Hall Effect jack on a compatible Ground Control fifth-wheel leveling system. The exact page identifies a 5,000-lb load capacity. Ground Control OneControl components sheet CCD-0002472 names 305340 at callout A with a 19.8125-inch front stroke, matching the 19-13/16-inch specifications entry.
The source identifies one jack with footpad, and its quick facts and gallery state mounting brackets are included. Bolt-On Pull Pin 119113 and Snapper Pin 225598 are explicitly excluded and sold separately. The kit photo shows the jack leg, motor, footpad and small fasteners; a complete leveling system is not included.
Why Choose This Replacement?
- Documented front jack: CCD-0002472 page 1 callout A identifies exact 305340 with 19.8125-inch stroke.
- Either front position: The exact page allows left or right front replacement; it is not the shorter rear jack.
- Published load: 5,000-lb jack load capacity stated on the page and gallery.
- OEM references: Grand Design 160088, Jayco 0267855 and Keystone 395034 are preserved as identification aids.
Technical Specifications
- SKU: 305340
- Brand: Lippert
- Jack Stroke: 19-13/16"
- Warranty Term: 1 Year
- Quantity In Package: 1
- Country of Origin: CHN
- Unit of Measure: EA
- Reference Vendor/Manufacturer Name: Lippert
- Grand Design Part Number: 160088
- Jayco Part Number: 0267855
- Keystone RV Part Number: 395034
- UPC: 848150057785
- Shipping Dimensions: 44" L x 10.5" W x 6.5" H, 45 lbs.
- Load capacity: 5,000 lb
- Documented front stroke: 19.8125 inches; CCD-0002472 callout A
- Excluded pins: 119113 bolt-on pull pin; 225598 snapper pin
Before You Order
Match the original 305340 front-jack identity, Hall Effect connectors, mounting arrangement and required travel. The page describes Ground Control four- or six-point fifth-wheel systems, but does not identify an exact purchasable full-kit SKU for this part. OEM references are identification aids and do not establish fit with every RV from those brands. Confirm fit-critical heights with the installed system.
Installation and Source Notes
The page is internally inconsistent: its specification table gives 19-13/16-inch stroke, confirmed by the exact parts-sheet 19.8125-inch front-stroke callout. Quick facts and a gallery graphic say the inner leg extends 17 inches and the jack retracts to 38 inches. A separate approximate-dimensions image labels 35.68-inch height and 6.72-inch width. The description also prints 12-1/2-inch lift and 24-1/2-inch retracted / 36-3/4-inch extended heights, which do not match the front-jack identity; the same parts sheet associates 12.5-inch stroke with rear/middle jacks. These values are not combined into an invented envelope. Use the exact front-jack stroke and confirm actual clearance before installation. The six-page components sheet is a parts reference, not a complete installation procedure. Follow instructions matched to the original system and retain the specified pins and mounting hardware.
Manuals and Documents
| Sku | 305340 |
|---|---|
| Brand | Lippert |
| Jack stroke | 19-13/16" |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Country of origin | CHN |
| Unit of measure | EA |
| Reference vendor/manufacturer name | Lippert |
| Grand design part number | 160088 |
| Jayco part number | 0267855 |
| Keystone rv part number | 395034 |
| Upc | 848150057785 |
| Shipping dimensions | 44" L x 10.5" W x 6.5" H, 45 lbs. |
| Load capacity | 5,000 lb |
| Documented front stroke | 19.8125 inches; CCD-0002472 callout A |
| Excluded pins | 119113 bolt-on pull pin; 225598 snapper pin |
- Is this the left or right front jack? Lippert identifies 305340 as a front replacement for either left or right position. Match the original system and mounting.
- Which stroke is supported by the exact parts sheet? CCD-0002472 callout A lists 305340 front stroke 19.8125 inches, matching the 19-13/16-inch specifications entry.
- What is excluded from the assembly? Bolt-On Pull Pin 119113 and Snapper Pin 225598 are explicitly not included and are sold separately.
- Why are several heights shown? The page mixes 38-inch retracted, 35.68-inch approximate graphic height and rear-style 24-1/2-inch dimensions. Confirm the original front jack clearance.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.










