Lippert ABS 4.4K Brake Hub Kit with Installed Bearings - Red, 1/2-in Studs - 2025077658
Ready to order
Lippert ABS 4.4K Brake Hub Kit with Installed Bearings - Red, 1/2-in Studs - 2025077658
---
Lippert ABS 4.4K Brake Hub Kit with Installed Bearings - Red, 1/2-in Studs - 2025077658
Lippert 2025077658 is a red 10-inch ABS brake hub kit with pre-greased, installed bearings for one wheel end on a matching 4,400-pound axle. It uses a 6 on 5-1/2-inch bolt pattern and 1/2-inch studs, with a published 14 to 15-inch wheel range. Cast-in tone-ring teeth work with the existing Lippert ABS sensor and Lippert ABS electric brakes. It is not compatible with Dexter ABS.
The manufacturer lists one ABS brake hub assembly and hardware. Its photographs show cap and spindle hardware, but the written contents do not itemize hardware sizes or counts. This is wheel-end replacement hardware for an existing compatible system; it does not supply a complete axle, wheel, brake backing-plate assembly or ABS conversion system.
Why Choose This ABS Hub Kit?
- Installed bearings: Pre-greased, installed bearings and pre-installed races simplify matching wheel-end service.
- Lippert ABS interface: Cast-in tone-ring teeth integrate with the existing compatible Lippert ABS sensor and electric brakes.
- Defined configuration: 4,400-lb axle application, 10-inch brake hub, six studs on a 5.5-inch bolt circle and 1/2-inch studs.
- Wheel range: Listed for 14 to 15-inch wheels; match the original spindle, bearings and seals.
- Construction: Red cast-iron hub and pre-installed corrosion-resistant zinc-plated wheel studs.
- Cap interface: Accepts press-in dust caps; confirm the original cap fit rather than substituting a threaded style.
- One wheel end: Quantity one in a kraft box; limited one-year warranty for materials or workmanship defects under manufacturer terms.
Technical Specifications
- SKU: 2025077658
- Brand: Lippert
- Series: ABS
- Stud Size: 1/2"
- Brake Type: ABS Compatible
- Axle Type: Standard
- Axle Capacity: 4,400 lbs.
- Brake Size: 10"
- Hub Style: Brake Hub
- Hub Bolt Pattern: 6 on 5.5"
- Hardware Type: Hub
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- UPC: 848150077721
- Shipping Dimensions: 13.5" L x 12" W x 6" H, 23.8 lbs.
Before You Order
Confirm the axle tag, spindle, bearings, seals, brake size, wheel bolt circle, stud diameter and existing Lippert ABS system. A shared bolt pattern or capacity alone does not confirm fit.
What is included?
The written contents list one ABS brake hub assembly and hardware. Bearings are pre-greased and installed; races and zinc-plated studs are pre-installed. The source photographs show a cap, plug, castle nut, washer, cotter pin and lug nuts, but the page does not itemize their sizes or counts. Do not transfer a hardware list from a different-capacity kit. A wheel, complete axle, brake backing-plate assembly, ABS sensor and controller are not listed as supplied.
Does it fit every 4.4K axle or Dexter ABS?
No. Match the original axle identification, spindle, bearing and seal requirements, 4,400-pound axle application, 10-inch brake, 6 on 5.5-inch bolt pattern, 1/2-inch studs and 14 to 15-inch wheel range. Lippert explicitly excludes Dexter ABS. Generic universal-fit or competitor-axle language does not establish this exact kit as a match. The axle capacity is not an additional per-hub rating.
Is this a complete ABS conversion kit?
No. The cast-in teeth work with an existing compatible Lippert ABS sensor and Lippert ABS electric brakes. The kit is a replacement wheel-end assembly; it does not establish compatibility with a new ABS module, sensor or wiring installation.
What lubricant and dust cap should I use?
Lippert describes pre-greased, installed bearings and acceptance of press-in dust caps. It does not publish a Lubrication System specification on this page. The red lubricant visible in the photos does not establish its grade, maintenance interval or filling procedure. Follow the original axle and bearing instructions for the exact assembly.
Where is it made?
The manufacturer specification table lists Country of Origin: USA, while the product photographs show CHINA on the hub casting and bearing. These source details conflict. We preserve the published specification and disclose the photographed markings; exact production origin for the supplied assembly is not confirmed.
What measurements are provided?
The published shipping package is 13.5 x 12 x 6 inches and 23.8 pounds. These are package figures, not installed hub dimensions or net weight. The page also specifies a 10-inch brake, 6 on 5.5-inch bolt pattern, 1/2-inch studs and 14 to 15-inch wheel range. Exact spindle dimensions, bearing bores, hub offset and hardware sizes are not supplied.
Which part number should I match?
Match Lippert SKU 2025077658 and UPC 848150077721 along with the original axle tag and wheel-end requirements. No separate OEM cross-reference, superseded part or exact parent axle SKU is established on the focused page. A photographed bearing marking alone does not establish a complete replacement bearing and seal set.
Are installation instructions linked?
The focused Support area links to general Lippert support resources, with no exact kit PDF. The hub-replacement article is general guidance. Have a qualified trailer technician verify spindle and bearing fit, ABS sensor alignment, lubrication, brake adjustment and fastener requirements using the original assembly instructions. No torque, stud thread pitch or bearing-preload procedure is inferred.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Compare Related Hub Configurations
The 4,400-lb hub with races and studs 2024029078 is a different listing; do not assume it includes this installed-bearing kit or ABS interface. The black 6K ABS hub kit 2025077660 has a different capacity, brake size and wheel range. These comparisons are not interchangeability claims.
Compare Color Options
The black Lippert 4.4K ABS installed-bearing kit 2025077656 has the same published fitment and generic written contents. Each color has its own SKU, UPC and shipping package figures. Confirm the original axle, spindle and ABS requirements for either option.
| Sku | 2025077658 |
|---|---|
| Brand | Lippert |
| Series | ABS |
| Stud size | 1/2" |
| Brake type | ABS Compatible |
| Axle type | Standard |
| Axle capacity | 4,400 lbs. |
| Brake size | 10" |
| Hub style | Brake Hub |
| Hub bolt pattern | 6 on 5.5" |
| Hardware type | Hub |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Upc | 848150077721 |
| Shipping dimensions | 13.5" L x 12" W x 6" H, 23.8 lbs. |
- What is included? The written contents list one ABS brake hub assembly and hardware. Bearings are pre-greased and installed; races and zinc-plated studs are pre-installed. The source photographs show a cap, plug, castle nut, washer, cotter pin and lug nuts, but the page does not itemize their sizes or counts. Do not transfer a hardware list from a different-capacity kit. A wheel, complete axle, brake backing-plate assembly, ABS sensor and controller are not listed as supplied.
- Does it fit every 4.4k axle or dexter abs? No. Match the original axle identification, spindle, bearing and seal requirements, 4,400-pound axle application, 10-inch brake, 6 on 5.5-inch bolt pattern, 1/2-inch studs and 14 to 15-inch wheel range. Lippert explicitly excludes Dexter ABS. Generic universal-fit or competitor-axle language does not establish this exact kit as a match. The axle capacity is not an additional per-hub rating.
- Is this a complete abs conversion kit? No. The cast-in teeth work with an existing compatible Lippert ABS sensor and Lippert ABS electric brakes. The kit is a replacement wheel-end assembly; it does not establish compatibility with a new ABS module, sensor or wiring installation.
- What lubricant and dust cap should i use? Lippert describes pre-greased, installed bearings and acceptance of press-in dust caps. It does not publish a Lubrication System specification on this page. The red lubricant visible in the photos does not establish its grade, maintenance interval or filling procedure. Follow the original axle and bearing instructions for the exact assembly.
- Where is it made? The manufacturer specification table lists Country of Origin: USA, while the product photographs show CHINA on the hub casting and bearing. These source details conflict. We preserve the published specification and disclose the photographed markings; exact production origin for the supplied assembly is not confirmed.
- What measurements are provided? The published shipping package is 13.5 x 12 x 6 inches and 23.8 pounds. These are package figures, not installed hub dimensions or net weight. The page also specifies a 10-inch brake, 6 on 5.5-inch bolt pattern, 1/2-inch studs and 14 to 15-inch wheel range. Exact spindle dimensions, bearing bores, hub offset and hardware sizes are not supplied.
- Which part number should i match? Match Lippert SKU 2025077658 and UPC 848150077721 along with the original axle tag and wheel-end requirements. No separate OEM cross-reference, superseded part or exact parent axle SKU is established on the focused page. A photographed bearing marking alone does not establish a complete replacement bearing and seal set.
- Are installation instructions linked? The focused Support area links to general Lippert support resources, with no exact kit PDF. The hub-replacement article is general guidance. Have a qualified trailer technician verify spindle and bearing fit, ABS sensor alignment, lubrication, brake adjustment and fastener requirements using the original assembly instructions. No torque, stud thread pitch or bearing-preload procedure is inferred.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.











