Lippert 6,000-lb Slipper Leaf Spring, 6 Leaves, 3 x 30-1/2 in - 296155
Ready to order
Lippert 6,000-lb Slipper Leaf Spring, 6 Leaves, 3 x 30-1/2 in - 296155
---
Lippert 6,000-lb Slipper Leaf Spring, 6 Leaves, 3 x 30-1/2 in - 296155
Lippert 296155 is a six-leaf steel slipper spring with a published 6,000-pound spring-assembly capacity. It is 3 inches wide and has a listed 30.5-inch length. The single-eye slipper design and layered leaves are intended to absorb road shock and vibration in a matching trailer suspension.
The expanded contents identify one Slipper Leaf Spring, with the eye bushing pre-installed. Pre-mounted hangers are required and hanger kits are sold separately. U-bolts, spring plates, attaching bolts, equalizers and a complete axle or suspension installation are not itemized as included. Confirm the original spring and its mounting arrangement before ordering.
Why Choose This Slipper Spring?
- 6,000-pound capacity applies to one spring assembly, not a complete axle or trailer rating.
- Six steel leaves and a single-eye slipper configuration.
- Published 3-inch width and 30.5-inch item length.
- Standens industry reference 72-44 and Dexter-compatible reference 072-044-00.
- Pre-installed eye bushing; requires the correct existing hanger arrangement.
- Layered steel construction helps absorb road shock and vibration.
- One spring per package; one-year limited warranty under manufacturer terms.
Technical Specifications
- SKU: 296155
- Brand: Lippert
- Weight Capacity: 6,000 lbs.
- Standens Leaf Spring Number: 72-44
- Spring Layer Count: 6
- Eye To Eye Length: 30.5
- Axle Spring Type: Slipper Leaf
- Load Arch Length: 2.75
- Axle Type: Spring
- Hardware Type: Spring
- Unit of Measure: EA
- Item Length (Inches): 30.5
- Item Width (Inches): 3
- Item Weight (Pounds): 46.150
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- Manufacturer Reference Number: 296155
- Dexter Compatible Part Number: 072-044-00
- UPC: 848150068606
- Shipping Dimensions: 34.5" L x 14.25" W x 7" H, 52 lbs.
Before You Order
Reference the original equipment label and compare the spring number, capacity, leaf count, width, end geometry, bushing requirements and hanger arrangement. Verify the source length designation and Load Arch Length field against the correct measurement method. Do not choose by a generic universal-fit label or trailer axle brand alone.
What is included?
The expanded contents identify one Slipper Leaf Spring, with the eye bushing pre-installed. Pre-mounted hangers are required and hanger kits are sold separately. U-bolts, spring plates, attaching bolts, equalizers and a complete axle or suspension installation are not itemized as included. Confirm the original spring and its mounting arrangement before ordering.
Does 6,000 pounds describe a spring or the axle?
The quick facts expressly call it 6,000-lb spring assembly capacity. It is the rating of this spring assembly; it does not independently establish axle capacity, trailer GVWR or a safe capacity upgrade. Match the trailer and suspension manufacturer requirements and all other rated components.
Why does the listing say eye-to-eye if it has one eye?
The manufacturer title and specification field call the 30.5-inch dimension Eye To Eye Length, while the quick facts and photos identify a single-eye slipper spring. We retain that published value as supplied, without inventing a second eye or different measurement endpoints. Confirm the original spring and the correct measurement method before purchasing.
Which part numbers identify it?
Match Lippert 296155, Standens leaf spring number 72-44 and the manufacturer’s Dexter-compatible reference 072-044-00. These are the published cross-references. They do not establish fit for every Dexter or competitor axle; confirm the original equipment label and full suspension dimensions.
What dimensions and weight are published?
Item length is 30.5 inches, item width is 3 inches and item weight is 46.150 pounds. The separate shipping package is 34.5 x 14.25 x 7 inches and 52 pounds. The source field Load Arch Length is 2.75 with no unit printed in that field; no alternate unloaded arch or installed clearance is inferred.
Does it include a bushing and mounting hardware?
The page says bushings are pre-installed in the eye-holes; this is a single-eye spring. It does not publish bushing material, eye/bushing diameter, bolt size, U-bolt dimensions or attaching hardware quantities. Hanger kits are explicitly sold separately. Confirm the original mounting requirements rather than choosing by spring width alone.
Can I substitute a similar 8,000-pound spring?
A similar width, length or leaf count does not establish a safe replacement or rating upgrade. The 8,000-pound spring 353498 has a different Standens number and Dexter-compatible reference. Match the original spring specification and manufacturer approval; no interchange is promised here.
Where are installation instructions?
The focused product page and Support link provide no exact spring PDF. The generic DIY wording does not supply support points, torque values, hardware reuse limits or an installation sequence. Follow the exact trailer/suspension instructions, confirm fit with the original equipment manufacturer and inspect the equipment periodically.
Compare Spring Specifications
The 8,000-pound slipper spring 353498 is a separate rated spring with different cross-references. Its similar published width and length do not establish interchangeability or a trailer capacity upgrade.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 296155 |
|---|---|
| Brand | Lippert |
| Weight capacity | 6,000 lbs. |
| Standens leaf spring number | 72-44 |
| Spring layer count | 6 |
| Eye to eye length | 30.5 |
| Axle spring type | Slipper Leaf |
| Load arch length | 2.75 |
| Axle type | Spring |
| Hardware type | Spring |
| Unit of measure | EA |
| Item length (inches) | 30.5 |
| Item width (inches) | 3 |
| Item weight (pounds) | 46.150 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Manufacturer reference number | 296155 |
| Dexter compatible part number | 072-044-00 |
| Upc | 848150068606 |
| Shipping dimensions | 34.5" L x 14.25" W x 7" H, 52 lbs. |
- What is included? The expanded contents identify one Slipper Leaf Spring, with the eye bushing pre-installed. Pre-mounted hangers are required and hanger kits are sold separately. U-bolts, spring plates, attaching bolts, equalizers and a complete axle or suspension installation are not itemized as included. Confirm the original spring and its mounting arrangement before ordering.
- Does 6,000 pounds describe a spring or the axle? The quick facts expressly call it 6,000-lb spring assembly capacity. It is the rating of this spring assembly; it does not independently establish axle capacity, trailer GVWR or a safe capacity upgrade. Match the trailer and suspension manufacturer requirements and all other rated components.
- Why does the listing say eye-to-eye if it has one eye? The manufacturer title and specification field call the 30.5-inch dimension Eye To Eye Length, while the quick facts and photos identify a single-eye slipper spring. We retain that published value as supplied, without inventing a second eye or different measurement endpoints. Confirm the original spring and the correct measurement method before purchasing.
- Which part numbers identify it? Match Lippert 296155, Standens leaf spring number 72-44 and the manufacturer’s Dexter-compatible reference 072-044-00. These are the published cross-references. They do not establish fit for every Dexter or competitor axle; confirm the original equipment label and full suspension dimensions.
- What dimensions and weight are published? Item length is 30.5 inches, item width is 3 inches and item weight is 46.150 pounds. The separate shipping package is 34.5 x 14.25 x 7 inches and 52 pounds. The source field Load Arch Length is 2.75 with no unit printed in that field; no alternate unloaded arch or installed clearance is inferred.
- Does it include a bushing and mounting hardware? The page says bushings are pre-installed in the eye-holes; this is a single-eye spring. It does not publish bushing material, eye/bushing diameter, bolt size, U-bolt dimensions or attaching hardware quantities. Hanger kits are explicitly sold separately. Confirm the original mounting requirements rather than choosing by spring width alone.
- Can i substitute a similar 8,000-pound spring? A similar width, length or leaf count does not establish a safe replacement or rating upgrade. The 8,000-pound spring 353498 has a different Standens number and Dexter-compatible reference. Match the original spring specification and manufacturer approval; no interchange is promised here.
- Where are installation instructions? The focused product page and Support link provide no exact spring PDF. The generic DIY wording does not supply support points, torque values, hardware reuse limits or an installation sequence. Follow the exact trailer/suspension instructions, confirm fit with the original equipment manufacturer and inspect the equipment periodically.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.




