Lippert 4,000-lb Slipper Spring, 7 Leaves, 2 in Wide - 710494
Ready to order
Lippert 4,000-lb Slipper Spring, 7 Leaves, 2 in Wide - 710494
---
Seven-Leaf Slipper Spring with 72-33 Reference
Lippert 710494 is a 2-inch-wide steel slipper spring with seven leaves and a 4,000-pound rating for one spring assembly. Its single-eye shape and formed slipper end must match the existing trailer suspension, together with the original mounting measurements.
One spring is listed with a pre-installed eye bushing; the hanger kit is separate. Lippert gives a 25-inch loaded length and also labels another length 26.88 inches, with 26-7/8 inches in the title. These source fields need to be matched by their measurement convention rather than treated as one identical dimension.
Why Choose This Slipper Spring?
- 4,000-pound spring assembly: The rating applies to one spring, within the limits of the complete axle and trailer.
- Seven steel leaves: The pack is listed with seven leaves and a 2-inch width.
- Single-eye slipper design: One end has a pre-installed eye bushing; the opposite end has the formed slipper profile.
- Published loaded length: The table and feature graphic state a 25-inch loaded length, separate from the 26.88-inch length field.
- Replacement references: Standens 72-33 and Dexter-compatible 072-033-00 help identify the original specification.
- Hangers separate: One slipper spring is supplied; the page requires existing hangers or a separately purchased hanger kit.
Technical Specifications
- SKU: 710494
- Brand: Lippert
- Weight Capacity: 4,000 lbs.
- Standens Leaf Spring Number: 72-33
- Load Length: 25"
- Spring Layer Count: 7
- Eye To Eye Length: 26.88
- Axle Spring Type: Slipper Leaf
- Load Arch Length: 2
- Axle Type: Spring
- Hardware Type: Spring
- Unit of Measure: EA
- Item Length (Inches): 26.88
- Item Width (Inches): 2
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: CHN
- Supersedes SKU: 156446,2023071984
- Dexter Compatible Part Number: 072-033-00
- UPC: 848150054029
- Shipping Dimensions: 27" L x 8" W x 3" H, 28 lbs.
Before You Order
Match SKU 710494, Standens 72-33, Dexter-compatible 072-033-00 and UPC 848150054029 with the original spring record. Check the seven-leaf pack, 2-inch width and single-eye slipper ends. Compare the 25-inch loaded measurement separately from the source-labeled 26.88-inch eye-to-eye field. A matching width alone does not establish a compatible suspension.
What is the difference between 25 inches and 26-7/8 inches?
The specification table and gallery call 25 inches the loaded length. The title says 26-7/8 inches eye-to-eye, and the table records Eye To Eye Length and item length as 26.88. This single-eye slipper design does not have two eyes, and the source does not define the endpoints or explicitly call the 26.88-inch field unloaded. Confirm the original measurement convention before ordering.
Is the 4,000-pound figure for a pair?
The page states 4,000 pounds per spring assembly and one spring per package. It is not a certified axle-pair or trailer rating increase. Retain the ratings of the axle, frame, tires and other suspension components.
Which older part numbers does it replace?
Lippert lists 156446 and 2023071984 as superseded SKUs. Its Standens spring number is 72-33 and its Dexter-compatible reference is 072-033-00. Check the equipment label and physical geometry as well as the reference.
What is included?
One slipper leaf spring is listed, with the eye bushing pre-installed according to the manufacturer. Hangers are separate. The gallery explicitly excludes the axle and other suspension components; mounting bolts, U-bolts and nuts are not itemized as supplied.
Does Load Arch Length 2 define the installed ride height?
The source field gives 2 without a unit or a measurement diagram. It is retained as printed, without assigning it a verified arch height or using it to promise a ride-height change.
Will it fit a competitor axle?
Lippert describes compatibility with most competitor trailer axles. Confirm spring width, rating, eye and slipper shape, actual length measurements, bushing bore and the hanger arrangement. The focused page does not identify an exact parent axle or mounting-kit SKU.
Can I substitute the six-leaf 3,500-pound spring?
Lippert 797547 differs in capacity, leaf count and its published length. These are separate spring specifications, not a proven interchangeable capacity selector. Match the original suspension rather than substituting by width alone.
Are detailed installation instructions linked?
The Support tab opens the general Lippert support hub, without an exact-model PDF on this page. Eye bore, center-bolt position, bolt thread and installation torque are not specified for this SKU. Use the applicable equipment instructions after confirming the exact suspension.
Compare a Different Spring Specification
The Lippert 797547 six-leaf, 3,500-pound spring is a separate specification with a different published length. It is linked for comparison, without an interchangeable-fit claim.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 710494 |
|---|---|
| Brand | Lippert |
| Weight capacity | 4,000 lbs. |
| Standens leaf spring number | 72-33 |
| Load length | 25" |
| Spring layer count | 7 |
| Eye to eye length | 26.88 |
| Axle spring type | Slipper Leaf |
| Load arch length | 2 |
| Axle type | Spring |
| Hardware type | Spring |
| Unit of measure | EA |
| Item length (inches) | 26.88 |
| Item width (inches) | 2 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | CHN |
| Supersedes sku | 156446,2023071984 |
| Dexter compatible part number | 072-033-00 |
| Upc | 848150054029 |
| Shipping dimensions | 27" L x 8" W x 3" H, 28 lbs. |
- What is the difference between 25 inches and 26-7/8 inches? The specification table and gallery call 25 inches the loaded length. The title says 26-7/8 inches eye-to-eye, and the table records Eye To Eye Length and item length as 26.88. This single-eye slipper design does not have two eyes, and the source does not define the endpoints or explicitly call the 26.88-inch field unloaded. Confirm the original measurement convention before ordering.
- Is the 4,000-pound figure for a pair? The page states 4,000 pounds per spring assembly and one spring per package. It is not a certified axle-pair or trailer rating increase. Retain the ratings of the axle, frame, tires and other suspension components.
- Which older part numbers does it replace? Lippert lists 156446 and 2023071984 as superseded SKUs. Its Standens spring number is 72-33 and its Dexter-compatible reference is 072-033-00. Check the equipment label and physical geometry as well as the reference.
- What is included? One slipper leaf spring is listed, with the eye bushing pre-installed according to the manufacturer. Hangers are separate. The gallery explicitly excludes the axle and other suspension components; mounting bolts, U-bolts and nuts are not itemized as supplied.
- Does load arch length 2 define the installed ride height? The source field gives 2 without a unit or a measurement diagram. It is retained as printed, without assigning it a verified arch height or using it to promise a ride-height change.
- Will it fit a competitor axle? Lippert describes compatibility with most competitor trailer axles. Confirm spring width, rating, eye and slipper shape, actual length measurements, bushing bore and the hanger arrangement. The focused page does not identify an exact parent axle or mounting-kit SKU.
- Can i substitute the six-leaf 3,500-pound spring? Lippert 797547 differs in capacity, leaf count and its published length. These are separate spring specifications, not a proven interchangeable capacity selector. Match the original suspension rather than substituting by width alone.
- Are detailed installation instructions linked? The Support tab opens the general Lippert support hub, without an exact-model PDF on this page. Eye bore, center-bolt position, bolt thread and installation torque are not specified for this SKU. Use the applicable equipment instructions after confirming the exact suspension.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.





