Lippert 29.5-Inch Inside-Mount Landing Gear Follow Leg - 119101
Ready to order
Lippert 29.5-Inch Inside-Mount Landing Gear Follow Leg - 119101
---
Lippert 29.5-Inch Inside-Mount Landing Gear Follow Leg - 119101
Lippert 119101 is the standard-length, inside-frame-mount follow leg for a correctly matched Venture-style power landing-gear assembly. Its 29.5-inch measurement is the length of the outer black tube, not jack travel or overall extended height. The follow/idler leg works opposite the motor-driven lead leg; it is not the motor mounting side.
One replacement leg is listed. The current exact sales page explicitly sells the pin, foot pad and mounting hardware separately, even though the representative product image shows a lower pin. A motor, gearbox, cross shaft, switch, harness and second leg are not itemized as included. This is not a complete two-leg power landing-gear system.
Why Choose This Part?
- Configuration: Follow / idler leg for a matched Venture-style system.
- Mount: Inside-frame configuration confirmed by the exact sales page and component chart.
- Size: Standard 29.5-inch outer black tube.
- Package: One leg; pin, foot pad and mounting hardware separate.
- Identification: Press-fit cap confirmed by the exact TI-155 119101 column.
Technical Specifications
- SKU: 119101
- Brand: Lippert
- Jack Mounting Location: Inside Mount
- Jack Type: Landing Gear
- Warranty Term: 1 Year
- Quantity In Package: 1
- Product Length: 29.5" (Standard)
- Country of Origin: CHN
- Unit of Measure: EA
- Keystone RV Part Number: 120238
- Winnebago Part Number: 203088-02-000
- Shipping Dimensions: 38" L x 8" W x 4" H, 27 lbs.
Before You Order
The electric landing-gear component chart identifies 119101 at callout A as the 29.5-inch inside-mount follow leg. Match the original part number, tube length, frame mounting, drive/idler role, mounting tabs and cap construction. TI-155 / CCD-0002050 also names 119101 in the matching column. Keystone RV 120238, Winnebago 203088-02-000 are part cross-references, not fit to every RV of those brands. Lead/follow describes the mechanism role, not a universal driver/passenger vehicle position.
Installation and Reference Notes
The older component chart describes 119101 with a snapper pin, but the current sales page explicitly says pin, foot pad and mounting hardware are sold separately. The older wording is not a current accessory promise. The assembly guide shows the complete system layout rather than this SKU’s package inventory. No numerical load rating or jack travel is published on the focused page; a generic 6K family manual does not establish this exact leg’s rating. Use the matched installation/service procedure and prescribed vehicle supports. Do not use the landing-gear assembly alone for tire changes or vehicle servicing. Other mounting locations, lengths and extra-tab versions are separate options, not automatic substitutes.
Published shipping reference: 38" L x 8" W x 4" H, 27 lbs.. These are transport data, not installed dimensions.
Related Parts
Compare another follow-leg mounting and length option. Match its configuration independently. Browse landing gear and leveling parts.
Manuals and Documents
| Sku | 119101 |
|---|---|
| Brand | Lippert |
| Jack mounting location | Inside Mount |
| Jack type | Landing Gear |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Product length | 29.5" (Standard) |
| Country of origin | CHN |
| Unit of measure | EA |
| Keystone rv part number | 120238 |
| Winnebago part number | 203088-02-000 |
| Shipping dimensions | 38" L x 8" W x 4" H, 27 lbs. |
- What does 29.5 inches measure? The outer black tube, not jack travel, fully extended height or carton length.
- Which mechanism side and mount is this? Follow / idler configuration with inside-frame mounting. Match the original leg’s exact geometry.
- Does it include the pin, footpad or hardware? The current sales page sells all three separately. The older component chart says with snapper pin, and the representative image shows a pin; neither overrides the current package statement.
- Does a motor or second leg come with it? No motor, gearbox, cross shaft, harness, switch or second leg is itemized as included. One replacement leg is listed.
- Can i substitute a different length or mounting location? Verify the complete original application first. Tube length, frame mount, drive/idler role and cap construction are separate selection attributes.
- Is the numerical capacity or travel established? No exact load rating or stroke is published on the focused sales page. Do not infer one from a generic family guide or shipping size.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


