Lippert 16K Threaded Brake Hub, 8 on 275 mm, M22 - 353325
Ready to order
Lippert 16K Threaded Brake Hub, 8 on 275 mm, M22 - 353325
---
Lippert 16K Threaded Brake Hub, 8 on 275 mm, M22 - 353325
Lippert 353325 is a cast-iron brake hub assembly for a matched 16,000-lb axle application. It uses an 8-on-275-mm wheel bolt pattern, M22 studs and a 17-1/2-inch wheel application. The published brake-hub size is 12-1/4 inches. This is a drum-brake hub, not a disc rotor or an idler hub.
Lippert states that races and wheel studs are pre-installed. The hub accepts Valcrum threaded dust caps. The exact page does not itemize a complete bearing kit, lubricant, lug nuts or an included dust cap; compatibility with a threaded cap is not an inclusion claim. Quantity is one hub assembly, not an axle pair.
Why Choose This Replacement?
- 16,000-lb: 16,000-lb axle application with 12-1/4-inch brake hub size.
- 8-on-275-mm: 8-on-275-mm bolt pattern and M22 wheel studs.
- Races: Races and wheel studs pre-installed according to the exact page.
- Cast-iron: Cast-iron construction with a Valcrum threaded-cap interface.
Technical Specifications
- SKU: 353325
- Brand: Lippert
- Weight Capacity: 16,000 lbs.
- Axle Capacity: 16,000 lbs.
- Brake Size: 12-1/4"
- Hub Style: Brake Hub
- Hub Bolt Pattern: 8 on 275 mm
- Wheel Size: 17-1/2"
- Hardware Type: Hub
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- UPC: 848150069023
- Shipping Dimensions: 20" L x 20" W x 20" H, 139 lbs.
Before You Order
Match the original axle rating, spindle and bearing/seal arrangement, drum-brake dimensions, wheel bolt pattern, M22 studs and wheel clearance. The source describes use with electric or hydraulic drum brakes, but the hub alone does not convert the brake actuation system. The 16,000-lb value is the axle application rating, not a promise that one hub supports an entire 16,000-lb axle load.
Installation and Source Notes
The source title identifies an oil application and the exact page specifies a threaded cap interface. CCD-0011132 is a general brake-hub guide and its exploded view is expressly representative. Its grease-related parts, pry-off cap removal and mallet-installed cap steps are not exact instructions for this threaded oil hub. Obtain service instructions matched to the installed oil-lubricated axle and cap. The manual stresses proper coach support, brake inspection and wheel torque matched to the wheel/fastener combination. Do not transfer a generic torque row to an unverified wheel assembly. Published 20 x 20 x 20-inch and 139-lb values are shipping references, not measured bare-hub dimensions.
Manuals and Documents
| Sku | 353325 |
|---|---|
| Brand | Lippert |
| Weight capacity | 16,000 lbs. |
| Axle capacity | 16,000 lbs. |
| Brake size | 12-1/4" |
| Hub style | Brake Hub |
| Hub bolt pattern | 8 on 275 mm |
| Wheel size | 17-1/2" |
| Hardware type | Hub |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Upc | 848150069023 |
| Shipping dimensions | 20" L x 20" W x 20" H, 139 lbs. |
- Is this one hub or an axle pair? The manufacturer lists quantity one. Order and verify each wheel-end component required for the axle.
- Are bearings and a cap included? The exact page confirms pre-installed races and wheel studs, but does not itemize a bearing kit or included dust cap.
- Which wheels and studs does it use? Lippert specifies a 17-1/2-inch wheel application, 8-on-275-mm bolt pattern and M22 studs. Match the original assembly.
- Can i use the generic dust-cap steps? The linked guide shows grease-style cap procedures. Use service instructions matched to this threaded oil-hub arrangement.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.







