Lippert 10K Slipper Spring Center Axle Hanger - 184079
Ready to order
Lippert 10K Slipper Spring Center Axle Hanger - 184079
---
Lippert 10K Slipper Spring Center Axle Hanger - 184079
Lippert 184079 is a weld-on center hanger for slipper leaf spring suspension used with 10,000-pound trailer axles. The hanger attaches to the chassis to provide a mounting point for axle and suspension components. Lippert specifies 1/4-inch-thick steel and item dimensions of 3-1/4 inches long by 4-1/8 inches wide.
The package contains one axle hanger in a kraft box. A complete axle, leaf springs, equalizer, suspension bolts, nuts, bushings and welding supplies are not listed as included. Select the center-hanger position and match the original equipment before ordering; front and rear hangers serve different positions.
Why Choose This Axle Hanger?
- Center position: Replacement center hanger for slipper leaf spring suspension.
- 10,000-pound axle application: Match the original axle and suspension; no trailer capacity increase is implied.
- Steel construction: Lippert specifies 1/4-inch material thickness.
- Weld-on attachment: Designed to attach directly to the trailer chassis.
- Published item dimensions: 3-1/4 inches long by 4-1/8 inches wide.
- Single replacement: One hanger per package; one-year limited warranty listed.
Technical Specifications
- SKU: 184079
- Brand: Lippert
- Axle Capacity: 10,000 lbs.
- Hardware Type: Bracket/Brace
- Product Length: 3.25"
- Unit of Measure: EA
- Item Length (Inches): 3.25
- Item Width (Inches): 4.125
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: CHN
- UPC: 848150068446
- Shipping Dimensions: 6" L x 6" W x 6" H, 5 lbs.
- Position: Center hanger
- Spring type: Slipper leaf spring
- Material: 1/4-inch-thick steel
- Attachment: Welded to trailer chassis
- Hanger height / hole diameter: Not specified on focused product page
- Exact axle / chassis model: Not identified; capacity alone does not establish fit
Before You Order
Confirm the original suspension type, hanger position, axle identification label and required dimensions. Lippert lists compatibility with 10,000-pound axles and slipper leaf springs, including most competitor trailer axle springs, but supplies no exact competitor model or parent chassis list for this SKU. The source’s universal-fit wording is not a substitute for matching the installed hardware. This hanger does not increase the rated capacity of the axle, frame, springs or trailer.
Item Dimensions
The published part dimensions are 3.25 inches long by 4.125 inches wide. Hanger height, hole diameter, hole-center locations and installation spacing are not supplied on the focused product page. The original photo shows the bracket and its holes for visual comparison; do not scale the image to select a bolt or lay out a weld.
Installation Information
Lippert states that this hanger welds to the trailer chassis. The product page does not supply a SKU-specific welding procedure, weld size, placement drawing or installation torque. Use the service information for the identified suspension and chassis and have the attachment work performed by someone qualified for that structural work. The linked CCD-0011277 manual covers leaf spring and bushing replacement generally; it does not identify hanger 184079 or authorize a welding or spacing specification for it. Its standard and heavy-duty sections use different hardware requirements, so they must not be treated as a torque prescription for this hanger.
Shipping Measurements
Shipping specifications are a 6 x 6 x 6-inch package weighing 5 pounds. Those are packed measurements and shipping weight, separate from the 3.25 x 4.125-inch item dimensions. They do not establish hanger height or bare-part weight.
Part Identification
Lippert SKU 184079 and UPC 848150068446 identify this listing. No OEM cross-reference or superseded part number is supplied on the focused source page.
Related Hangers to Compare
Compare the separately listed 10K front hanger 182242 and 10K rear hanger 182245 by position and dimensions. The 298458 center hanger has a different capacity range and dimensions. These comparison links do not establish interchangeability or a complete matched suspension kit.
Manuals and Documents
Lippert leaf spring and bushing installation manual CCD-0011277 is general suspension reference, not a part-specific hanger welding guide.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 184079 |
|---|---|
| Brand | Lippert |
| Axle capacity | 10,000 lbs. |
| Hardware type | Bracket/Brace |
| Product length | 3.25" |
| Unit of measure | EA |
| Item length (inches) | 3.25 |
| Item width (inches) | 4.125 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | CHN |
| Upc | 848150068446 |
| Shipping dimensions | 6" L x 6" W x 6" H, 5 lbs. |
| Position | Center hanger |
| Spring type | Slipper leaf spring |
| Material | 1/4-inch-thick steel |
| Attachment | Welded to trailer chassis |
| Hanger height / hole diameter | Not specified on focused product page |
| Exact axle / chassis model | Not identified; capacity alone does not establish fit |
- Where does this hanger install? Lippert identifies 184079 as a center hanger for 10,000-pound axles with slipper leaf springs, welded to the trailer chassis. Confirm the original position and exact suspension before ordering.
- What is included? The package contains one axle hanger in a kraft box. A complete axle, leaf springs, equalizer, suspension bolts, nuts, bushings and welding supplies are not listed as included. Select the center-hanger position and match the original equipment before ordering; front and rear hangers serve different positions.
- What size and material is the hanger? The published part dimensions are 3.25 inches long by 4.125 inches wide. Hanger height, hole diameter, hole-center locations and installation spacing are not supplied on the focused product page. The original photo shows the bracket and its holes for visual comparison; do not scale the image to select a bolt or lay out a weld. Lippert specifies 1/4-inch-thick steel.
- Will it fit every 10,000-pound axle? Confirm the original suspension type, hanger position, axle identification label and required dimensions. Lippert lists compatibility with 10,000-pound axles and slipper leaf springs, including most competitor trailer axle springs, but supplies no exact competitor model or parent chassis list for this SKU. The source’s universal-fit wording is not a substitute for matching the installed hardware. This hanger does not increase the rated capacity of the axle, frame, springs or trailer.
- Does the linked manual give welding instructions for 184079? Lippert states that this hanger welds to the trailer chassis. The product page does not supply a SKU-specific welding procedure, weld size, placement drawing or installation torque. Use the service information for the identified suspension and chassis and have the attachment work performed by someone qualified for that structural work. The linked CCD-0011277 manual covers leaf spring and bushing replacement generally; it does not identify hanger 184079 or authorize a welding or spacing specification for it. Its standard and heavy-duty sections use different hardware requirements, so they must not be treated as a torque prescription for this hanger.
- Are package and hanger dimensions different? Shipping specifications are a 6 x 6 x 6-inch package weighing 5 pounds. Those are packed measurements and shipping weight, separate from the 3.25 x 4.125-inch item dimensions. They do not establish hanger height or bare-part weight.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.



