Lippert 10K Oil Disc Brake Rotor, 5/8-Inch Studs - 2020111739
Ready to order
Lippert 10K Oil Disc Brake Rotor, 5/8-Inch Studs - 2020111739
---
Lippert 10K Oil Disc Brake Rotor, 5/8-Inch Studs - 2020111739
Lippert 2020111739 is a disc-brake rotor assembly for a matched 10,000-lb axle application using oil-bath lubrication. It has an 8-on-6-1/2-inch wheel bolt pattern, 5/8-inch studs and a 16- through 17-1/2-inch wheel application. The exact product title specifies a threaded dust-cap configuration.
The page lists an inner bearing and seal in its included-items section. Gallery images show the hub/rotor assembly, installed wheel studs, center opening and rear seal area. The title identifies a threaded dust cap, but the source does not itemize a complete brake conversion with caliper, pads, brackets, hydraulic actuator or brake lines. Quantity is one assembly.
Why Choose This Replacement?
- Oil-bath: Oil-bath rotor assembly for a matched 10,000-lb axle.
- 8-on-6-1/2-inch: 8-on-6-1/2-inch wheel bolt pattern with 5/8-inch studs.
- Cast-iron: Cast-iron construction for the stated 16- to 17-1/2-inch wheel application.
- Inner: Inner bearing and seal explicitly listed by the source.
Technical Specifications
- SKU: 2020111739
- Brand: Lippert
- Weight Capacity: 10,000 lbs.
- Stud Size: 5/8"
- Lubrication System: Oil Bath
- Axle Capacity: 10,000 lbs.
- Hub Style: Brake Hub
- Hub Bolt Pattern: 8 on 6.5"
- Wheel Size: 16" - 17-1/2"
- Hardware Type: Brake Rotor
- Material Type: Cast Iron
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- UPC: 848150067203
- Shipping Dimensions: 27" L x 16" W x 15" H, 66 lbs.
Before You Order
Match the original axle, spindle, bearing and seal specifications, wheel pattern, stud size and disc-brake system. The 10,000-lb rating describes the axle application; it is not a per-wheel-end load claim or an increase to the trailer rating. Similar bolt patterns on drum hubs or other axle ratings do not establish interchange. No exact complete-system parent SKU is supported by this focused source.
Installation and Source Notes
CCD-0011271 is the linked family installation guide. It gives general rotor service and wheel-fastener guidance, including grease-style components and cap procedures. This exact listing is oil bath with a threaded dust-cap interface. Use instructions matched to the actual oil-lubricated axle, bearings and cap, and do not apply a generic press-in cap procedure to the threaded arrangement. The manual does not independently establish this exact SKU or a universal conversion. Its general diagrams are not a packing list for this product. The manufacturer publishes a 27 x 16 x 15-inch shipping box and 66-lb shipping weight; these are not installed rotor dimensions. Confirm brake and wheel clearances before ordering.
Manuals and Documents
| Sku | 2020111739 |
|---|---|
| Brand | Lippert |
| Weight capacity | 10,000 lbs. |
| Stud size | 5/8" |
| Lubrication system | Oil Bath |
| Axle capacity | 10,000 lbs. |
| Hub style | Brake Hub |
| Hub bolt pattern | 8 on 6.5" |
| Wheel size | 16" - 17-1/2" |
| Hardware type | Brake Rotor |
| Material type | Cast Iron |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Upc | 848150067203 |
| Shipping dimensions | 27" L x 16" W x 15" H, 66 lbs. |
- Is this a drum-brake hub? No. The exact product is a disc-brake rotor assembly. Match the original disc-brake and spindle arrangement.
- Which parts are explicitly listed as included? The source included-items section names an inner bearing and seal; the product is one rotor assembly with the titled threaded-cap configuration.
- Does it include a full hydraulic brake conversion? No complete conversion is itemized. Calipers, brackets, pads, actuator and lines are not established as kit contents.
- Which lubricant and wheel pattern are stated? Lippert specifies oil-bath lubrication, an 8-on-6-1/2-inch wheel pattern and 5/8-inch studs for the 10,000-lb axle application.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.







