MORryde TV1-087H Legacy Swinging TV Wall Mount - 25 lb (Discontinued)
---
TV1-087H is the legacy double-joint swinging/extension wall mount with a 25 lb maximum TV weight. Its original manual, archived manufacturer catalog and gallery label agree on 25 lb. Match the actual mount label and TV mounting pattern; the separate TV1-123H’s 35 lb rating does not increase TV1-087H’s limit.
Features & Specifications
- Legacy TV1-087H: 25 lb maximum; up to 200×200 mm VESA—verify actual TV holes
- 25-inch extension, 180° swing, up to 350° swivel and 0–10.5° tilt; clearance-dependent
- Handle or optional strap releases lock; thumbscrews lock tilt; verify locked before travel
- Vertical support must carry five times combined TV/mount weight; successor and adapter fit unconfirmed
Why Choose TV1-087H?
The original TV1-087H manual supports VESA hole patterns up to 200×200 mm; the listing identifies 75×75, 100×100 and 200×200 mm patterns. Match actual TV hole spacing, screw thread, allowed insertion depth and rear recess. An exact adapter, TV-model pairing or replacement plate part number was not established; a similar catalog adapter is not proof of fit. The exact TV1-087H manual describes 25-inch extension out from the wall, 180° swing, up to 350° TV swivel and 0–10.5° tilt. Available movement may vary with TV size or installed position. The archived catalog identifies 25 inches as open overall depth, not an individual arm-link measurement. Check screen edges, wall/cabinet obstacles and cable slack before moving it.
Fitment limit: match this item to your existing MORryde part number, RV measurement, or MORryde documentation. If your measurement, frame, door width, capacity, or application does not match the listing, choose the correct sibling part instead of forcing the wrong one.
Compare TV mounts
Compare exact mount designs and instructions. These are separate listings; a comparison link is not approval for interchangeable hardware or replacement fit.
| Model / Part # | Listing | Best For | View Details |
|---|---|---|---|
| TV1-087H | Swinging TV Mount - 25 lbs Capacity - TV1-087H [DISCONTINUED - See TV1-123H] | Compare exact model, label, VESA, support and clearance; no interchangeable-part approval | Current Product |
| TV1-080H | TV1-080H Drop Down Ceiling TV Mount - 25 lb. capacity - | Compare exact model, label, VESA, support and clearance; no interchangeable-part approval | View Details |
| TV1-122H | TV1-122H Extension Swivel TV Mount for RV - 50 lb. capacity | Compare exact model, label, VESA, support and clearance; no interchangeable-part approval | View Details |
| TV1-051H | TV1-051H Snap-In TV Mount - 25 lb. capacity - | Compare exact model, label, VESA, support and clearance; no interchangeable-part approval | View Details |
Tip: MORryde part numbers are specific. Check the SKU and the physical measurement or rating on your RV before choosing between similar listings.
Technical Specifications
| Part Number | TV1-087H |
| Brand | MORryde |
| Shipping Weight | 15 lb |
| Barcode | 08586392 |
| Product Type | RV TV Mounts |
What's Included
The original manual illustrates M4/M5 × 12/30 mm and M6/M8 × 12/35 mm TV bolts, lock washers, washers and optional spacers for recessed mounting holes. It illustrates 1/4×1 inch self-drilling screws or 1/4×1 or 1-1/2 inch lag bolts with 1/4 inch washers, selected for the supporting material; lag bolts use 1/8 inch pilot holes. Match the TV thread, permitted screw depth and actual supporting structure. Not all illustrated hardware is used, some TVs require separately obtained hardware, and the actual supplied pack/revision is unconfirmed. Avoid fasteners long enough to puncture exterior structure; two people may be needed to lift and secure the TV.
Compatible Models & Alternatives
The earlier listing marked TV1-087H discontinued and said “See TV1-123H.” That historical note is retained as comparison context, not proof of a drop-in replacement. MORryde’s current TV1-123H page and its own manual specify 35 lb, 24-inch extension, up to 360° swivel/swing, ±8° forward/back tilt and ±5° side tilt, with a separate stud-and-nylock TV plate. These are different specifications from the original 25 lb TV1-087H. Formal manufacturer supersession, old-hole reuse, plate/receiver interchangeability and hardware reuse remain unconfirmed. Follow the actual model’s instructions; the TV1-087H manual linked on the comparison listing does not become TV1-123H instructions.
Frequently Asked Questions
How do I confirm this is the right MORryde part?
TV1-087H is the legacy double-joint swinging/extension wall mount with a 25 lb maximum TV weight. Its original manual, archived manufacturer catalog and gallery label agree on 25 lb. Match the actual mount label and TV mounting pattern; the separate TV1-123H’s 35 lb rating does not increase TV1-087H’s limit. Mount TV1-087H to a vertical wall or supporting surface capable of five times the combined TV-and-mount weight; RV structure may require reinforcement. The original manual excludes brick, concrete and concrete block. The TV bolts to its mounting plate; this is not documented as a portable snap-in dock. Ceiling or countertop installation is not established for this model. The manual permits reversing the VESA plate for right-side orientation only through its illustrated disconnect-and-remount procedure.
Is this an OEM MORryde replacement?
The earlier listing marked TV1-087H discontinued and said “See TV1-123H.” That historical note is retained as comparison context, not proof of a drop-in replacement. MORryde’s current TV1-123H page and its own manual specify 35 lb, 24-inch extension, up to 360° swivel/swing, ±8° forward/back tilt and ±5° side tilt, with a separate stud-and-nylock TV plate. These are different specifications from the original 25 lb TV1-087H. Formal manufacturer supersession, old-hole reuse, plate/receiver interchangeability and hardware reuse remain unconfirmed. Follow the actual model’s instructions; the TV1-087H manual linked on the comparison listing does not become TV1-123H instructions.
What should I measure before ordering?
The archived MORryde catalog gives TV1-087H overall dimensions of 14.8 W × 10.5 H × 3.3 D inches closed and 25 D inches open. Earlier listing/retailer width of 14.75 inches differs slightly; measure the actual assembly. These are overall dimensions, not packed size, a guaranteed moving-clearance envelope or an individual arm length. The former 15.75 W × 9 H × 1 D inch claim is not supported for TV1-087H; it appears on the separate TV1-123H manufacturer page. Retained shipping weight and separate operational measurement fields were not certified by this review. The exact TV1-087H manual describes 25-inch extension out from the wall, 180° swing, up to 350° TV swivel and 0–10.5° tilt. Available movement may vary with TV size or installed position. The archived catalog identifies 25 inches as open overall depth, not an individual arm-link measurement. Check screen edges, wall/cabinet obstacles and cable slack before moving it.
What if my RV uses a similar but different MORryde part?
The original TV1-087H manual supports VESA hole patterns up to 200×200 mm; the listing identifies 75×75, 100×100 and 200×200 mm patterns. Match actual TV hole spacing, screw thread, allowed insertion depth and rear recess. An exact adapter, TV-model pairing or replacement plate part number was not established; a similar catalog adapter is not proof of fit. The earlier listing marked TV1-087H discontinued and said “See TV1-123H.” That historical note is retained as comparison context, not proof of a drop-in replacement. MORryde’s current TV1-123H page and its own manual specify 35 lb, 24-inch extension, up to 360° swivel/swing, ±8° forward/back tilt and ±5° side tilt, with a separate stud-and-nylock TV plate. These are different specifications from the original 25 lb TV1-087H. Formal manufacturer supersession, old-hole reuse, plate/receiver interchangeability and hardware reuse remain unconfirmed. Follow the actual model’s instructions; the TV1-087H manual linked on the comparison listing does not become TV1-123H instructions.
Why Buy from Elkhart RV Parts?
Elkhart RV Parts focuses on real RV replacement parts with clear part-number identification, practical fitment notes, and fast support from a team located in Elkhart, Indiana.
Handle, optional strap and travel lock
Thread the release handle into place; the original instructions allow an optional strap for extra reach. Pull the handle or strap to release the lock and extend or swivel the arm. Use the thumbscrews to adjust and lock tilt. The manual requires the mount locked during travel; stow it, verify lock engagement and secure fasteners before vehicle movement. Exact replacement handle, strap or latch part numbers were not established.
Vertical support and plate orientation
Mount TV1-087H to a vertical wall or supporting surface capable of five times the combined TV-and-mount weight; RV structure may require reinforcement. The original manual excludes brick, concrete and concrete block. The TV bolts to its mounting plate; this is not documented as a portable snap-in dock. Ceiling or countertop installation is not established for this model. The manual permits reversing the VESA plate for right-side orientation only through its illustrated disconnect-and-remount procedure.
Dimensions and moving clearance
The archived MORryde catalog gives TV1-087H overall dimensions of 14.8 W × 10.5 H × 3.3 D inches closed and 25 D inches open. Earlier listing/retailer width of 14.75 inches differs slightly; measure the actual assembly. These are overall dimensions, not packed size, a guaranteed moving-clearance envelope or an individual arm length. The former 15.75 W × 9 H × 1 D inch claim is not supported for TV1-087H; it appears on the separate TV1-123H manufacturer page. Retained shipping weight and separate operational measurement fields were not certified by this review.
Historical discontinued and successor note
The earlier listing marked TV1-087H discontinued and said “See TV1-123H.” That historical note is retained as comparison context, not proof of a drop-in replacement. MORryde’s current TV1-123H page and its own manual specify 35 lb, 24-inch extension, up to 360° swivel/swing, ±8° forward/back tilt and ±5° side tilt, with a separate stud-and-nylock TV plate. These are different specifications from the original 25 lb TV1-087H. Formal manufacturer supersession, old-hole reuse, plate/receiver interchangeability and hardware reuse remain unconfirmed. Follow the actual model’s instructions; the TV1-087H manual linked on the comparison listing does not become TV1-123H instructions.
Original instructions and model comparison
Original TV1-087H MORryde instructions · Archived MORryde catalog, page 22 · Compare the separate TV1-123H mount
| Weight capacity (pounds) | 25 |
|---|---|
| Vesa identification (mm) | 75×75;100×100;up to200×200 — verifyactualholes |
| Swing angle (degrees) | 180 |
| Swivel angle (degrees) | Up to350;clearance-dependent |
| Tilt angle (degrees) | 0–10.5;clearance-dependent |
| Extension and open overall depth (inches) | 25;notanindividualarm-linklength |
| Closed dimensions (w × h × d inches) | 14.8 × 10.5 × 3.3 — archivedmanufacturer catalog |
| Motion and clearance | The exact TV1-087H manual describes 25-inch extension out from the wall, 180° swing, up to 350° TV swivel and 0–10.5° tilt. Available movement may vary with TV size or installed position. The archived catalog identifies 25 inches as open overall depth, not an individual arm-link measurement. Check screen edges, wall/cabinet obstacles and cable slack before moving it. |
| Release and travel lock | Thread the release handle into place; the original instructions allow an optional strap for extra reach. Pull the handle or strap to release the lock and extend or swivel the arm. Use the thumbscrews to adjust and lock tilt. The manual requires the mount locked during travel; stow it, verify lock engagement and secure fasteners before vehicle movement. Exact replacement handle, strap or latch part numbers were not established. |
| Structure and orientation | Mount TV1-087H to a vertical wall or supporting surface capable of five times the combined TV-and-mount weight; RV structure may require reinforcement. The original manual excludes brick, concrete and concrete block. The TV bolts to its mounting plate; this is not documented as a portable snap-in dock. Ceiling or countertop installation is not established for this model. The manual permits reversing the VESA plate for right-side orientation only through its illustrated disconnect-and-remount procedure. |
| Hardware and actual pack | The original manual illustrates M4/M5 × 12/30 mm and M6/M8 × 12/35 mm TV bolts, lock washers, washers and optional spacers for recessed mounting holes. It illustrates 1/4×1 inch self-drilling screws or 1/4×1 or 1-1/2 inch lag bolts with 1/4 inch washers, selected for the supporting material; lag bolts use 1/8 inch pilot holes. Match the TV thread, permitted screw depth and actual supporting structure. Not all illustrated hardware is used, some TVs require separately obtained hardware, and the actual supplied pack/revision is unconfirmed. Avoid fasteners long enough to puncture exterior structure; two people may be needed to lift and secure the TV. |
| Dimension and measurement limits | The archived MORryde catalog gives TV1-087H overall dimensions of 14.8 W × 10.5 H × 3.3 D inches closed and 25 D inches open. Earlier listing/retailer width of 14.75 inches differs slightly; measure the actual assembly. These are overall dimensions, not packed size, a guaranteed moving-clearance envelope or an individual arm length. The former 15.75 W × 9 H × 1 D inch claim is not supported for TV1-087H; it appears on the separate TV1-123H manufacturer page. Retained shipping weight and separate operational measurement fields were not certified by this review. |
| Historical discontinued/successor context | The earlier listing marked TV1-087H discontinued and said “See TV1-123H.” That historical note is retained as comparison context, not proof of a drop-in replacement. MORryde’s current TV1-123H page and its own manual specify 35 lb, 24-inch extension, up to 360° swivel/swing, ±8° forward/back tilt and ±5° side tilt, with a separate stud-and-nylock TV plate. These are different specifications from the original 25 lb TV1-087H. Formal manufacturer supersession, old-hole reuse, plate/receiver interchangeability and hardware reuse remain unconfirmed. Follow the actual model’s instructions; the TV1-087H manual linked on the comparison listing does not become TV1-123H instructions. |
| Adapter and service-part limits | The original TV1-087H manual supports VESA hole patterns up to 200×200 mm; the listing identifies 75×75, 100×100 and 200×200 mm patterns. Match actual TV hole spacing, screw thread, allowed insertion depth and rear recess. An exact adapter, TV-model pairing or replacement plate part number was not established; a similar catalog adapter is not proof of fit. |
- What is the maximum weight capacity of the morryde tv1-087h swinging tv mount? TV1-087H is the legacy double-joint swinging/extension wall mount with a 25 lb maximum TV weight. Its original manual, archived manufacturer catalog and gallery label agree on 25 lb. Match the actual mount label and TV mounting pattern; the separate TV1-123H’s 35 lb rating does not increase TV1-087H’s limit.
- How far can the double-joint extension arm of the tv mount extend? The exact TV1-087H manual describes 25-inch extension out from the wall, 180° swing, up to 350° TV swivel and 0–10.5° tilt. Available movement may vary with TV size or installed position. The archived catalog identifies 25 inches as open overall depth, not an individual arm-link measurement. Check screen edges, wall/cabinet obstacles and cable slack before moving it.
- What range of motion does the morryde tv1-087h swinging tv mount offer? The exact TV1-087H manual describes 25-inch extension out from the wall, 180° swing, up to 350° TV swivel and 0–10.5° tilt. Available movement may vary with TV size or installed position. The archived catalog identifies 25 inches as open overall depth, not an individual arm-link measurement. Check screen edges, wall/cabinet obstacles and cable slack before moving it. Thread the release handle into place; the original instructions allow an optional strap for extra reach. Pull the handle or strap to release the lock and extend or swivel the arm. Use the thumbscrews to adjust and lock tilt. The manual requires the mount locked during travel; stow it, verify lock engagement and secure fasteners before vehicle movement. Exact replacement handle, strap or latch part numbers were not established.
- Which vesa mounting patterns are compatible with this tv mount? The original TV1-087H manual supports VESA hole patterns up to 200×200 mm; the listing identifies 75×75, 100×100 and 200×200 mm patterns. Match actual TV hole spacing, screw thread, allowed insertion depth and rear recess. An exact adapter, TV-model pairing or replacement plate part number was not established; a similar catalog adapter is not proof of fit.
- What items are included in the box with the morryde tv1-087h swinging tv mount? The original manual illustrates M4/M5 × 12/30 mm and M6/M8 × 12/35 mm TV bolts, lock washers, washers and optional spacers for recessed mounting holes. It illustrates 1/4×1 inch self-drilling screws or 1/4×1 or 1-1/2 inch lag bolts with 1/4 inch washers, selected for the supporting material; lag bolts use 1/8 inch pilot holes. Match the TV thread, permitted screw depth and actual supporting structure. Not all illustrated hardware is used, some TVs require separately obtained hardware, and the actual supplied pack/revision is unconfirmed. Avoid fasteners long enough to puncture exterior structure; two people may be needed to lift and secure the TV. Thread the release handle into place; the original instructions allow an optional strap for extra reach. Pull the handle or strap to release the lock and extend or swivel the arm. Use the thumbscrews to adjust and lock tilt. The manual requires the mount locked during travel; stow it, verify lock engagement and secure fasteners before vehicle movement. Exact replacement handle, strap or latch part numbers were not established.
- How is tv1-087h mounted and locked for travel? Mount TV1-087H to a vertical wall or supporting surface capable of five times the combined TV-and-mount weight; RV structure may require reinforcement. The original manual excludes brick, concrete and concrete block. The TV bolts to its mounting plate; this is not documented as a portable snap-in dock. Ceiling or countertop installation is not established for this model. The manual permits reversing the VESA plate for right-side orientation only through its illustrated disconnect-and-remount procedure. Thread the release handle into place; the original instructions allow an optional strap for extra reach. Pull the handle or strap to release the lock and extend or swivel the arm. Use the thumbscrews to adjust and lock tilt. The manual requires the mount locked during travel; stow it, verify lock engagement and secure fasteners before vehicle movement. Exact replacement handle, strap or latch part numbers were not established.
- Is tv1-123h a confirmed drop-in replacement for tv1-087h? The earlier listing marked TV1-087H discontinued and said “See TV1-123H.” That historical note is retained as comparison context, not proof of a drop-in replacement. MORryde’s current TV1-123H page and its own manual specify 35 lb, 24-inch extension, up to 360° swivel/swing, ±8° forward/back tilt and ±5° side tilt, with a separate stud-and-nylock TV plate. These are different specifications from the original 25 lb TV1-087H. Formal manufacturer supersession, old-hole reuse, plate/receiver interchangeability and hardware reuse remain unconfirmed. Follow the actual model’s instructions; the TV1-087H manual linked on the comparison listing does not become TV1-123H instructions.
Product Documents & Manuals
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.













