MORryde - 2.9" Wet Bolt UO115-966 - Suspension Replacement Hardware with Bonded Rubber Bushings

MORryde 2.9" Wet Bolt Suspension Hardware - Maintenance-Free Performance

The MORryde 2.9" Wet Bolt (Part UO115-966) is a precision-engineered suspension replacement component featuring bonded rubber bushings for maintenance-free operation. Designed specifically for MORryde wet bolt suspension systems, this high-grade steel bolt delivers superior vibration damping, quiet operation, and exceptional durability compared to traditional greaseable bushings.

Measuring 2.9 inches in length, this wet bolt is engineered to exact OEM specifications for specific suspension mounting locations where this length is required to maintain proper suspension geometry. The integrated bonded rubber bushings eliminate the need for regular greasing while providing superior articulation and load distribution across the suspension system.

Why Choose MORryde Wet Bolt Technology?

Maintenance-Free Operation: Unlike traditional greaseable bushings that require regular lubrication every 3,000-5,000 miles, MORryde wet bolts feature bonded rubber bushings that are permanently lubricated. This eliminates the time-consuming maintenance schedule and ensures consistent performance without the mess and hassle of greasing.

Superior Vibration Damping: The bonded rubber bushing design absorbs road shock and vibration far more effectively than metal-on-metal or bronze bushing designs. This translates to a smoother, quieter ride with reduced stress on your RV's frame, suspension components, and interior fixtures.

Extended Service Life: MORryde wet bolts are engineered for longevity, typically outlasting traditional greaseable bushings by 2-3 times. The bonded rubber construction resists wear, compression set, and environmental degradation, maintaining optimal performance for years of trouble-free service.

Corrosion Resistant Construction: High-grade steel construction with protective coating resists rust and corrosion even in harsh environments including salt exposure, moisture, and temperature extremes. This ensures reliable performance regardless of climate or road conditions.

Quiet, Smooth Operation: The rubber bushing design eliminates the squeaking, binding, and noise associated with worn greaseable bushings or bronze bushings. Your suspension operates smoothly and quietly, enhancing ride comfort and reducing driver fatigue.

Technical Specifications

• Part Number: UO115-966
• SKU: UO115-966
• Length: 2.9 inches
• Bushing Type: Bonded rubber (maintenance-free)
• Material: High-grade steel with protective coating
• Construction: Precision-engineered with bonded rubber bushings
• Lubrication Required: None (self-lubricating design)
• Compatibility: MORryde wet bolt suspension systems requiring 2.9" length
• Application: RV and trailer suspension systems
• Manufacturer: MORryde International
• Sold As: Individual wet bolt

Understanding Wet Bolt Suspension Technology

What is a Wet Bolt? A wet bolt is a specialized suspension component that combines a bolt with integrated bonded rubber bushings. Unlike traditional "dry" bolts that rely on separate greaseable bushings or bronze sleeves, wet bolts have the rubber permanently bonded to the bolt shaft, creating a maintenance-free pivot point.

How Wet Bolts Work: The bonded rubber bushings flex and compress as the suspension articulates, absorbing shock and vibration while allowing smooth rotation. The rubber's natural lubricity eliminates metal-on-metal contact, preventing wear and noise without requiring external lubrication.

Advantages Over Traditional Bushings: Wet bolt technology eliminates maintenance intervals, reduces noise and vibration, extends component life, and provides more consistent performance over time. The sealed design also prevents contamination from dirt, water, and road debris that can accelerate wear in greaseable bushing systems.

Complete Your Wet Bolt Suspension System

Building or servicing a MORryde wet bolt suspension? We carry the complete range of components:

• MORryde 3.4" Wet Bolt (UO115-967) - Longer wet bolt for different suspension mounting locations
• MORryde Wet Bolt Nut (UO116-421) - Precision-engineered fastener for wet bolt assemblies
• MORryde Bronze Bushing (UO136-592) - Premium bronze bearing surface for hybrid suspension designs
• MORryde 2 Hole Shackle Plate (RE150-004) - Shackle mounting component for wet bolt systems
• MORryde Shackle Assembly with Bolts (RE43-004) - Complete shackle kit for wet bolt suspension
• MORryde Heavy Duty Shackle Upgrade Kit (UO12-016) - Complete upgrade kit for tandem axle trailers

Compare MORryde Wet Bolt Options

Helpful Tip: Wet bolt length is critical for proper suspension geometry and safe operation. Always verify the required bolt length for your specific suspension mounting location before ordering. Using the wrong length can result in improper suspension alignment, premature wear, and potential safety issues. Consult your suspension documentation or measure the existing bolt if replacing a worn component.

Installation & Replacement

Replacing a wet bolt in your MORryde suspension system requires basic mechanical skills and proper tools:

1. Safety First: Park on level ground, chock wheels, and support the RV or trailer with jack stands rated for the weight
2. Remove Load: Use a floor jack to slightly lift the suspension and relieve load on the wet bolt
3. Remove Old Bolt: Remove the nut and carefully drive out the old wet bolt using a brass drift or soft hammer
4. Inspect Mounting Points: Check shackle plates, hangers, and mounting holes for wear, cracks, or damage
5. Install New Wet Bolt: Insert the new wet bolt through the mounting points, ensuring proper alignment
6. Torque to Specification: Install the nut and torque to MORryde's specifications (consult your suspension manual)
7. Lower and Test: Remove jack stands, lower the suspension, and test for proper operation

If you're uncomfortable performing suspension work, consult a qualified RV technician or mobile RV service provider. Proper installation is critical for safe operation.

When to Replace Wet Bolts

Visible Rubber Deterioration: If you notice cracking, tearing, or separation of the bonded rubber bushings, replacement is necessary to maintain proper suspension function and safety.

Excessive Play or Movement: Worn wet bolts will develop play in the suspension, causing clunking noises, poor handling, and uneven tire wear. Check for movement by rocking the suspension while parked.

Suspension Noise: Squeaking, creaking, or clunking from the suspension during travel often indicates worn wet bolts that need replacement.

Routine Inspection Findings: During annual suspension inspections, technicians may identify wet bolts showing early signs of wear that should be replaced preventatively.

After Suspension Damage: If your suspension experiences impact damage from road hazards or accidents, inspect and replace wet bolts as needed even if they appear intact.

Maintenance Tips

• Inspect wet bolts annually for signs of rubber deterioration, cracking, or separation
• Check for excessive play or movement in suspension pivot points
• Verify proper torque on wet bolt nuts during routine maintenance
• Keep suspension components clean and free from road debris buildup
• Address suspension noise promptly to prevent accelerated wear
• Replace wet bolts in pairs (left and right) for balanced suspension performance

Frequently Asked Questions

What makes wet bolts better than greaseable bushings?
Wet bolts eliminate maintenance requirements, provide superior vibration damping, operate more quietly, and typically last 2-3 times longer than traditional greaseable bushings. The sealed design also prevents contamination that accelerates wear in greaseable systems.

Do wet bolts require any lubrication?
No, wet bolts are completely maintenance-free. The bonded rubber bushings are permanently lubricated and never require greasing, eliminating a major maintenance task.

How do I know if I need the 2.9" or 3.4" wet bolt?
The required length depends on your specific suspension mounting location. Measure your existing bolt or consult your MORryde suspension documentation to determine the correct length for each position.

Can I replace just one wet bolt or should I replace them in pairs?
While you can replace individual wet bolts as needed, replacing them in pairs (left and right sides) ensures balanced suspension performance and prevents uneven wear patterns.

How long do MORryde wet bolts typically last?
With proper installation and normal use, MORryde wet bolts typically provide 100,000+ miles of service, often outlasting traditional greaseable bushings by 2-3 times.

Are these wet bolts compatible with other suspension brands?
These wet bolts are specifically engineered for MORryde suspension systems. While dimensions may be similar to other brands, always use MORryde OEM parts to ensure proper fit, performance, and warranty coverage.

Why Buy From Elkhart RV Parts?

• Authorized Dealer: We are an authorized distributor of genuine MORryde products
• OEM-Grade Quality: Every part meets or exceeds original equipment manufacturer specifications
• Expert Support: Our team has deep product knowledge - use our AI Live Chat for assistance with part identification and compatibility
• Fast Shipping: Nationwide delivery with careful packaging to prevent damage
• Competitive Pricing: Direct pricing on premium RV suspension components
• Complete Selection: We stock the full range of MORryde wet bolt suspension parts and accessories

Order Your MORryde Wet Bolt Today

Maintain your MORryde suspension system with genuine OEM wet bolt hardware. The 2.9" wet bolt delivers maintenance-free performance, superior vibration damping, and extended service life for reliable, quiet operation mile after mile.

Need help identifying the correct wet bolt for your suspension? Use our AI Live Chat for expert assistance with part identification, compatibility verification, and installation guidance.