Lippert White Power Stabilizer Switch, Bezel & Harness - 144214
Ready to order
Lippert White Power Stabilizer Switch, Bezel & Harness - 144214
---
Lippert White Power Stabilizer Switch 144214
Replace a correctly matched white power stabilizer control with Lippert 144214. The switch is labeled Extend and Retract and comes with its bezel and harness. Lippert describes its use in electric stabilizer, rear electric stabilizer and ultra light electric stabilizer kits.
This listing supplies one switch assembly rather than a complete stabilizer jack or motor. A waterproof enclosure is not itemized as included. TI-221 explicitly identifies 144214 as non-waterproof, so the mounting location and protection around the switch matter when selecting a replacement.
Why Choose This Switch Assembly?
- White Extend/Retract control: Switch, bezel and harness are described by Lippert.
- Documented face size: TI-221 Figure 3 shows 2.75-inch height and 1.625-inch width.
- Non-waterproof construction: A waterproof enclosure is needed for an exposed exterior application; Lippert directs unenclosed exterior use to 387874.
- PSX1 parts identification: CCD-0002579 page 3 names 144214 as callout M.
- Published OEM references: Heartland 63814, Jayco 0502801, Keystone 168049 and Winnebago 202493-01-000.
Technical Specifications
- SKU: 144214
- Brand: Lippert
- Quantity In Package: 1
- Warranty Term: 1 Year
- Country of Origin: CHN
- Unit of Measure: EA
- Heartland Part Number: 63814
- Jayco Part Number: 0502801
- Keystone RV Part Number: 168049
- Winnebago Part Number: 202493-01-000
- Shipping Dimensions: 13" L x 2.75" W x 1.5" H, 0.25 lbs.
- Color: White
- Included Components: Switch, bezel and harness
- Function Labels: Extend / Retract
- Switch Face Height: 2.75 inches, TI-221 Figure 3
- Switch Face Width: 1.625 inches, TI-221 Figure 3
- Waterproof: No, TI-221 Figure 3
- PSX1 Component Callout: M, CCD-0002579 page 3
Before You Order
Confirm Lippert 144214 and compare the original switch face, harness and enclosure. Published cross-references are Heartland 63814, Jayco 0502801, Keystone 168049 and Winnebago 202493-01-000. The 2.75 x 1.625-inch face dimensions come from TI-221 Figure 3. The separate 13 x 2.75 x 1.5-inch, 0.25-pound figures describe shipping and do not establish harness length or the installed cutout size.
The PSX1 component sheet identifies this white switch at callout M on page 3. The same page identifies the white system kit 369774 and directs buyers to replacement kit 2025012487 at callout P. Check the installed switch, wiring and protective enclosure rather than assuming every PSX1 or every white switch configuration is identical.
Waterproof Exterior Comparison
Lippert’s TI-221 directs buyers to waterproof switch 387874 for exterior use without a waterproof enclosure box. That switch has a different face size and construction. This comparison does not make 144214 an unenclosed exterior replacement or establish a direct mechanical interchange.
Manuals and Documents
- TI-221 Electric Stabilizer Switch Comparative — Rev. 09.20.18
- PSX1 Electric Stabilizer Components — Rev. 02.16.26
The comparison and component sheet identify the switch and its system context. They do not provide a 144214 terminal pinout, wire gauge, current rating, mounting-hole spacing or step-by-step wiring procedure. Use the correct installed-system instructions before service.
Frequently Asked Questions
What is included?
Lippert describes a white switch, bezel and harness, with one assembly per package. A stabilizer jack, motor and waterproof enclosure are not itemized as included.
Is this switch waterproof?
No. TI-221 identifies 144214 as non-waterproof. For exterior use without a waterproof enclosure box, Lippert directs buyers to switch 387874. Do not treat a white bezel as weather protection.
What are the physical dimensions?
TI-221 Figure 3 shows a switch face 2.75 inches high by 1.625 inches wide. The product page’s 13 x 2.75 x 1.5-inch measurements and 0.25-pound weight are shipping data, not the face size or a verified harness length.
Which systems use this switch?
The product page names Lippert electric, rear electric and ultra light electric stabilizer kits. The PSX1 component sheet identifies white switch 144214 at callout M and lists the white kit 369774 as obsolete with replacement 2025012487 at callout P. Confirm the installed switch, enclosure and wiring before replacement.
What OEM references are listed?
Lippert lists Heartland 63814, Jayco 0502801, Keystone 168049 and Winnebago 202493-01-000. These references do not establish fitment to every RV from those manufacturers.
Does this include a wiring diagram or pinout?
The linked switch comparison and component sheet identify the part and system context. They do not provide an exact 144214 pinout, wire gauge, electrical rating, mounting-hole centers or terminal-by-terminal installation procedure. Follow the instructions for the installed stabilizer.
Can I substitute it for a black switch?
Check the exact part, mounting dimensions, harness and enclosure requirement. TI-221 distinguishes the non-waterproof 144214 from waterproof 387874 and other switch assemblies; color alone does not establish interchangeability.
| Sku | 144214 |
|---|---|
| Brand | Lippert |
| Quantity in package | 1 |
| Warranty term | 1 Year |
| Country of origin | CHN |
| Unit of measure | EA |
| Heartland part number | 63814 |
| Jayco part number | 0502801 |
| Keystone rv part number | 168049 |
| Winnebago part number | 202493-01-000 |
| Shipping dimensions | 13" L x 2.75" W x 1.5" H, 0.25 lbs. |
| Color | White |
| Included components | Switch, bezel and harness |
| Function labels | Extend / Retract |
| Switch face height | 2.75 inches, TI-221 Figure 3 |
| Switch face width | 1.625 inches, TI-221 Figure 3 |
| Waterproof | No, TI-221 Figure 3 |
| Psx1 component callout | M, CCD-0002579 page 3 |
- What is included? Lippert describes a white switch, bezel and harness, with one assembly per package. A stabilizer jack, motor and waterproof enclosure are not itemized as included.
- Is this switch waterproof? No. TI-221 identifies 144214 as non-waterproof. For exterior use without a waterproof enclosure box, Lippert directs buyers to switch 387874. Do not treat a white bezel as weather protection.
- What are the physical dimensions? TI-221 Figure 3 shows a switch face 2.75 inches high by 1.625 inches wide. The product page’s 13 x 2.75 x 1.5-inch measurements and 0.25-pound weight are shipping data, not the face size or a verified harness length.
- Which systems use this switch? The product page names Lippert electric, rear electric and ultra light electric stabilizer kits. The PSX1 component sheet identifies white switch 144214 at callout M and lists the white kit 369774 as obsolete with replacement 2025012487 at callout P. Confirm the installed switch, enclosure and wiring before replacement.
- What oem references are listed? Lippert lists Heartland 63814, Jayco 0502801, Keystone 168049 and Winnebago 202493-01-000. These references do not establish fitment to every RV from those manufacturers.
- Does this include a wiring diagram or pinout? The linked switch comparison and component sheet identify the part and system context. They do not provide an exact 144214 pinout, wire gauge, electrical rating, mounting-hole centers or terminal-by-terminal installation procedure. Follow the instructions for the installed stabilizer.
- Can i substitute it for a black switch? Check the exact part, mounting dimensions, harness and enclosure requirement. TI-221 distinguishes the non-waterproof 144214 from waterproof 387874 and other switch assemblies; color alone does not establish interchangeability.
Compatible With
Fitment and included components
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


