Lippert V-Tech Tall Extended Fixed Flush Head - 124000
Ready to order
Lippert V-Tech Tall Extended Fixed Flush Head - 124000
---
Tall and Extended Fixed V-Tech Flush Head
Lippert 124000 is a replacement fixed V-Tech flush head assembly for hydraulic 2.5 x 2.5 through-frame slide-outs. Lippert identifies this version as tall and extended. Match that head configuration and the original mounting arrangement before choosing a replacement.
One head assembly is supplied per package, sold each. It is a replacement bracket/head component rather than a complete room mechanism, pump or cylinder. Lippert warns that head assemblies may vary within a single slide-out system and directs buyers to consult the system manual before purchasing.
Why Choose This Fixed V-Tech Head?
- Fixed V-Tech flush head in the tall and extended configuration.
- For hydraulic 2.5 x 2.5 through-frame slide-outs.
- Replacement head component, supplied one per package.
- Manufacturer identifies hardware type as bracket/brace.
- Check the original head at each position; assemblies may vary within one system.
Technical Specifications
- SKU: 124000
- Brand: Lippert
- Hardware Type: Bracket/Brace
- Warranty Term: 1 Year
- Quantity In Package: 1
- Unit of Measure: EA
- Shipping Dimensions: 9.25" L x 6.25" W x 4.75" H, 12 lbs.
Before You Order
Confirm SKU 124000, fixed flush configuration, tall and extended form and hydraulic V-Tech application against the original head and system manual. The focused page does not establish an exact parent model, OEM cross-reference, superseded number or drive/follow-side designation. Check each head position individually; shared names and similar illustrations do not prove a substitute will fit.
Which system is this head for?
The manufacturer assigns SKU 124000 to a fixed flush head in its hydraulic V-Tech 2.5 x 2.5 through-frame slide-out range. The focused source does not name an exact parent mechanism model.
Is this the adjustable tall drop head?
No. Lippert identifies 124000 as a fixed flush head, tall and extended. Adjustable drop heads such as 151474 have a different stated configuration; the common V-Tech name does not establish interchangeability.
Does fixed identify an active or passive position?
The page calls this head fixed but does not state its active/drive or passive/follow position. Confirm that position from the original equipment and system manual rather than transferring a side rule from an adjustable-head listing.
Can I use the same head at every location?
Lippert warns that head assemblies may vary within a single slide-out system and says to consult the system manual before purchase. Compare each original head, its mounting arrangement and location separately.
What is included?
One head assembly, sold each. The manufacturer illustration shows bracket sections, openings and a square nut on the lower ledge. A room bar, cylinder, hydraulic pump, motor or full slide-out mechanism is not listed as included; no separate mounting-hardware quantity is provided.
How tall and extended is the head?
Tall and extended are the manufacturer’s configuration descriptions. The page does not publish overall installed height, extension length, hole spacing or a dimensional reference drawing. The 2.5 x 2.5 designation describes the stated slide-out system application, not the full head size.
Are the box dimensions the installed head dimensions?
No. Lippert lists 9.25 x 6.25 x 4.75 inches and 12 pounds in its shipping-package specifications. Use the original part and applicable system manual to confirm installed geometry.
Is a model-specific manual linked?
The Support link opens general Lippert support; no exact 124000 PDF was linked in this focused pass. Obtain the applicable system manual before installation. The page provides no welding procedure, thread specification or exact OEM cross-reference.
Compare a Different V-Tech Head
The tall adjustable 1-3/8-inch drop head 151474 is a different configuration. Compare only with your original and manual; this link does not establish interchangeability.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 124000 |
|---|---|
| Brand | Lippert |
| Hardware type | Bracket/Brace |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Unit of measure | EA |
| Shipping dimensions | 9.25" L x 6.25" W x 4.75" H, 12 lbs. |
- Which system is this head for? The manufacturer assigns SKU 124000 to a fixed flush head in its hydraulic V-Tech 2.5 x 2.5 through-frame slide-out range. The focused source does not name an exact parent mechanism model.
- Is this the adjustable tall drop head? No. Lippert identifies 124000 as a fixed flush head, tall and extended. Adjustable drop heads such as 151474 have a different stated configuration; the common V-Tech name does not establish interchangeability.
- Does fixed identify an active or passive position? The page calls this head fixed but does not state its active/drive or passive/follow position. Confirm that position from the original equipment and system manual rather than transferring a side rule from an adjustable-head listing.
- Can i use the same head at every location? Lippert warns that head assemblies may vary within a single slide-out system and says to consult the system manual before purchase. Compare each original head, its mounting arrangement and location separately.
- What is included? One head assembly, sold each. The manufacturer illustration shows bracket sections, openings and a square nut on the lower ledge. A room bar, cylinder, hydraulic pump, motor or full slide-out mechanism is not listed as included; no separate mounting-hardware quantity is provided.
- How tall and extended is the head? Tall and extended are the manufacturer’s configuration descriptions. The page does not publish overall installed height, extension length, hole spacing or a dimensional reference drawing. The 2.5 x 2.5 designation describes the stated slide-out system application, not the full head size.
- Are the box dimensions the installed head dimensions? No. Lippert lists 9.25 x 6.25 x 4.75 inches and 12 pounds in its shipping-package specifications. Use the original part and applicable system manual to confirm installed geometry.
- Is a model-specific manual linked? The Support link opens general Lippert support; no exact 124000 PDF was linked in this focused pass. Obtain the applicable system manual before installation. The page provides no welding procedure, thread specification or exact OEM cross-reference.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


