Lippert V-Tech Tall 1-3/8-Inch Adjustable Drop Head - 151474
Ready to order
Lippert V-Tech Tall 1-3/8-Inch Adjustable Drop Head - 151474
---
Tall Adjustable V-Tech Drop Head for Hydraulic Slide-Outs
Lippert 151474 is a replacement adjustable V-Tech tall 1-3/8-inch drop head assembly for hydraulic 2.5 x 2.5 through-frame slide-out systems. It replaces the matching head component at the passive/follow-side position; confirm the original configuration before ordering.
The package contains one head assembly, sold each. This is a replacement head component rather than a complete slide-out, hydraulic cylinder, pump or room bar. Lippert warns that head assemblies may vary within a single system and recommends checking the system manual before purchase.
Why Choose This Tall V-Tech Head?
- Tall adjustable V-Tech head with the manufacturer’s 1-3/8-inch drop designation.
- For hydraulic 2.5 x 2.5 through-frame slide-out systems.
- Adjustable heads are used on the passive/follow side.
- One head assembly per package, sold each.
- Check each head location: assemblies can vary within the same system.
Technical Specifications
- SKU: 151474
- Brand: Lippert
- Warranty Term: 1 Year
- Quantity In Package: 1
- Unit of Measure: EA
- Shipping Dimensions: 11.95" L x 5.5" W x 4.75" H, 7 lbs.
Before You Order
Match Lippert SKU 151474, the tall adjustable drop-head layout, hydraulic V-Tech application and passive/follow-side position to your existing equipment. Compare the slotted brackets and mounting arrangement with the original. No OEM cross-reference, superseded SKU or exact parent-model list is published on this page. Similar-looking flush, fixed or electric heads are not established substitutes.
Which slide-out system is this head for?
Lippert identifies 151474 as an adjustable V-Tech tall 1-3/8-inch drop head assembly for hydraulic 2.5 x 2.5 through-frame slide-out systems. It does not name an exact complete mechanism model; match the original head and applicable system manual.
Does it fit the active or passive side?
The manufacturer states adjustable heads are used on the passive/follow side. This listing does not establish active-drive-side or electric-system fitment.
What does tall 1-3/8-inch drop mean?
Tall and 1-3/8-inch drop are the manufacturer’s head-configuration designations. The focused page provides no datum drawing, overall installed height, slot spacing or adjustment range. Compare the complete original bracket arrangement rather than relying on that number alone.
Are all heads in the same slide-out identical?
No. Lippert warns that head assemblies may vary within a single slide-out system and directs buyers to consult the system manual before purchasing. Check each position separately.
What is included?
Lippert lists one head assembly, sold each. Its illustration shows slotted bracket sections and a square nut on the lower ledge. A room bar, hydraulic cylinder, pump, motor or complete slide-out system is not listed as included, and no separate mounting-hardware count is provided.
Are the published dimensions installed dimensions?
The 11.95 x 5.5 x 4.75-inch dimensions and seven-pound weight are shipping-package specifications. They do not establish the installed head size, mounting pattern or adjustment travel. The hydraulic 2.5 x 2.5 system designation is also not an overall head measurement.
Is a part-specific installation manual provided?
The page’s Support link opens general Lippert support, with no exact 151474 PDF linked in this focused review. Use the applicable system manual for head identification and adjustment. No thread specification or welding procedure is published on the page.
Compare a Different Hydraulic Head
The hydraulic V-Tech adjustable flush head 119157 has a different head configuration. Compare only against your original and manual; the shared system description does not establish interchangeability.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 151474 |
|---|---|
| Brand | Lippert |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Unit of measure | EA |
| Shipping dimensions | 11.95" L x 5.5" W x 4.75" H, 7 lbs. |
- Which slide-out system is this head for? Lippert identifies 151474 as an adjustable V-Tech tall 1-3/8-inch drop head assembly for hydraulic 2.5 x 2.5 through-frame slide-out systems. It does not name an exact complete mechanism model; match the original head and applicable system manual.
- Does it fit the active or passive side? The manufacturer states adjustable heads are used on the passive/follow side. This listing does not establish active-drive-side or electric-system fitment.
- What does tall 1-3/8-inch drop mean? Tall and 1-3/8-inch drop are the manufacturer’s head-configuration designations. The focused page provides no datum drawing, overall installed height, slot spacing or adjustment range. Compare the complete original bracket arrangement rather than relying on that number alone.
- Are all heads in the same slide-out identical? No. Lippert warns that head assemblies may vary within a single slide-out system and directs buyers to consult the system manual before purchasing. Check each position separately.
- What is included? Lippert lists one head assembly, sold each. Its illustration shows slotted bracket sections and a square nut on the lower ledge. A room bar, hydraulic cylinder, pump, motor or complete slide-out system is not listed as included, and no separate mounting-hardware count is provided.
- Are the published dimensions installed dimensions? The 11.95 x 5.5 x 4.75-inch dimensions and seven-pound weight are shipping-package specifications. They do not establish the installed head size, mounting pattern or adjustment travel. The hydraulic 2.5 x 2.5 system designation is also not an overall head measurement.
- Is a part-specific installation manual provided? The page’s Support link opens general Lippert support, with no exact 151474 PDF linked in this focused review. Use the applicable system manual for head identification and adjustment. No thread specification or welding procedure is published on the page.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


