Lippert Standard-Angle Weld-On Slide-Out Head with Nut - 159624
---
Standard-Angle Weld-On Head for a Hydraulic Through-Frame Slide-Out
Lippert 159624 is a replacement standard-angle weld-on head assembly with nut for a hydraulic 2 x 2 Through-Frame slide-out. Use the exact original head configuration and system service information to identify the replacement.
One head assembly is listed per package, sold each. Lippert warns that head assemblies may vary within a single slide-out system, so the general system description alone does not establish the correct head at every position. A complete cylinder, arm or slide-out assembly is not part of this head-and-nut listing.
Why Choose This Standard-Angle Head?
- Replacement weld-on head assembly for a hydraulic 2 x 2 Through-Frame slide-out.
- Standard-angle head with nut, Lippert SKU 159624.
- Jayco reference 0713456, Keystone 290460 and Winnebago 20292301000.
- One assembly per package, sold each.
- USA origin and one-year warranty.
- Manufacturer warns that head assemblies can vary within one slide-out system.
Technical Specifications
- SKU: 159624
- Brand: Lippert
- Country of Origin: USA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Unit of Measure: EA
- Jayco Part Number: 0713456
- Keystone RV Part Number: 290460
- Winnebago Part Number: 20292301000
- Shipping Dimensions: 6.5" L x 6.5" W x 6" H, 1 lbs.
Before You Order
Consult the system manual and compare the original standard-angle head, hydraulic application, slots and nut position with SKU 159624. Head assemblies may differ within the same system. The manufacturer does not provide slot spacing, nut thread or installed head measurements here; do not use the shipping package as a mounting template.
What does this head assembly fit?
Lippert identifies a hydraulic 2 x 2 Through-Frame slide-out application. The page does not name exact complete slide-out models or provide mounting measurements. Match the system manual and original head configuration.
Can one slide-out system use different heads?
Yes. Lippert explicitly warns that head assemblies may vary within a single slide-out system and tells buyers to consult the system manual before purchasing. Do not assume every position uses this standard-angle head.
What is included?
The source identifies a standard-angle weld-on head with nut and lists quantity one, unit EA. The manufacturer drawing shows the angled plate, two elongated slots and a nut at the lower flange. It does not itemize a separate fastener pack or include a complete cylinder, arm or slide-out mechanism.
Which OEM numbers are listed?
Jayco 0713456, Keystone RV 290460 and Winnebago 20292301000 are the manufacturer-published references. Match the original parts information; these do not establish fit for every vehicle from those RV manufacturers.
Is this the same as an electric drop head?
No such interchangeability is established. This page states hydraulic 2 x 2 Through-Frame and standard angle. Electric applications, drop-head offsets and other angles must be selected using their own exact service references.
What are the installed measurements and nut thread?
Lippert does not publish overall installed head dimensions, slot-center spacing, nut thread or offset on the focused page. The 6.5 x 6.5 x 6-inch, one-pound values are shipping-package fields rather than installed geometry.
Are weld specifications or installation instructions linked?
The focused Support link opens general Lippert support, with no exact 159624 PDF linked. Weld-on describes the component type; the page does not provide a welding method, material grade, fastener torque or installation procedure. Consult the applicable system manual.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 159624 |
|---|---|
| Brand | Lippert |
| Country of origin | USA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Unit of measure | EA |
| Jayco part number | 0713456 |
| Keystone rv part number | 290460 |
| Winnebago part number | 20292301000 |
| Shipping dimensions | 6.5" L x 6.5" W x 6" H, 1 lbs. |
- What does this head assembly fit? Lippert identifies a hydraulic 2 x 2 Through-Frame slide-out application. The page does not name exact complete slide-out models or provide mounting measurements. Match the system manual and original head configuration.
- Can one slide-out system use different heads? Yes. Lippert explicitly warns that head assemblies may vary within a single slide-out system and tells buyers to consult the system manual before purchasing. Do not assume every position uses this standard-angle head.
- What is included? The source identifies a standard-angle weld-on head with nut and lists quantity one, unit EA. The manufacturer drawing shows the angled plate, two elongated slots and a nut at the lower flange. It does not itemize a separate fastener pack or include a complete cylinder, arm or slide-out mechanism.
- Which oem numbers are listed? Jayco 0713456, Keystone RV 290460 and Winnebago 20292301000 are the manufacturer-published references. Match the original parts information; these do not establish fit for every vehicle from those RV manufacturers.
- Is this the same as an electric drop head? No such interchangeability is established. This page states hydraulic 2 x 2 Through-Frame and standard angle. Electric applications, drop-head offsets and other angles must be selected using their own exact service references.
- What are the installed measurements and nut thread? Lippert does not publish overall installed head dimensions, slot-center spacing, nut thread or offset on the focused page. The 6.5 x 6.5 x 6-inch, one-pound values are shipping-package fields rather than installed geometry.
- Are weld specifications or installation instructions linked? The focused Support link opens general Lippert support, with no exact 159624 PDF linked. Weld-on describes the component type; the page does not provide a welding method, material grade, fastener torque or installation procedure. Consult the applicable system manual.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


