Lippert Schwintek Hall Effect Bed Tilt Controller - 260793
Ready to order
Lippert Schwintek Hall Effect Bed Tilt Controller - 260793
---
Lippert Schwintek Hall Effect Bed Tilt Controller - 260793
Lippert 260793 is a replacement Hall Effect controller module for a matching Schwintek bed tilt system. It replaces Lippert 287196 and restores the control component without purchasing a complete bed tilt or slide-out assembly. Match the original controller and the installed system documentation before ordering; a shared Schwintek name alone is not a universal-fit guarantee.
This listing includes the controller module only, sold as one each. It does not include a complete slide mechanism, bed platform, motor, switch or separate wiring harness. The source photos show the controller housing, mounting ears, motor connector, configuration control and switch/battery terminals. Labels in the gallery show both 15001-C and 15001-A with LCI number 260793; the page does not promise which label revision will be supplied.
Why Choose This Bed Tilt Controller?
- Bed tilt replacement: manufacturer identifies Schwintek bed tilt system compatibility, subject to the original system manual.
- Predecessor reference: Lippert lists 287196 as the superseded SKU.
- OEM identification: Heartland 0167078, Keystone RV 388754 and Winnebago 179390-01-000 are source-listed cross-references.
- Compact module: manufacturer graphics show approximate 3.99 x 2.51-inch face dimensions and 1-inch housing depth.
- Controller only: one module, with a source-listed one-year warranty under manufacturer terms.
Technical Specifications
- SKU: 260793
- Brand: Lippert
- Quantity In Package: 1
- Warranty Term: 1 Year
- Country of Origin: USA
- Unit of Measure: EA
- Supersedes SKU: 287196
- Reference Vendor/Manufacturer Name: Lippert
- Heartland Part Number: 0167078
- Keystone RV Part Number: 388754
- Winnebago Part Number: 179390-01-000
- UPC: 848150047465
- Shipping Dimensions: 6" L x 4" W x 4" H, 0.31 lbs.
Before You Order
Check the original controller label, LCI part number, installed Schwintek bed tilt system and connector arrangement. Compare the OEM references where applicable. Keep the system-specific wiring and setup instructions available; do not substitute a general room-slide controller procedure.
Will this work with every Schwintek slide-out?
The focused page identifies a Schwintek bed tilt controller, while some generic text calls it a slide-out replacement. Use the bed tilt system manual and original controller identity to confirm the match. The page does not establish interchangeability with all Schwintek room-slide controllers or name an exact parent-unit SKU.
Which part does it replace?
The source Supersedes SKU field lists 287196. OEM references are Heartland 0167078, Keystone RV 388754 and Winnebago 179390-01-000. These references help identify the component, not every compatible vehicle model or model year.
What is included?
One controller module only. The complete slide-out or bed tilt assembly is excluded. Motors, bed platform, separate harnesses, wall switches and mounting fasteners are not itemized as included. RV/trailer and slide photographs are representative applications, not supplied equipment.
Which label revision will arrive?
The main photo reads 15001-C and LCI260793, while the rendering reads 15001-A and LCI260793. Both appear in the manufacturer gallery; the page does not specify the supplied revision or prove every revision interchangeable. Compare the original controller and confirm the exact replacement requirements.
How large is the controller?
Manufacturer graphics marked Approximate Dimensions show 3.99 inches across the mounting-ear envelope, 2.51 inches in the face direction drawn, and a 1-inch housing depth in the side view. These are not a mounting-hole center spacing or connector-clearance specification. Separately, published shipping dimensions are 6 x 4 x 4 inches and shipping weight 0.31 pounds.
Does the controller add 18 inches of travel?
Lippert describes an 18-inch space benefit for the complete Schwintek bed tilt system. Quick facts and graphics say fully inclined/free space, while narrative copy says fully reclined/sleeping space. This is not an 18-inch controller dimension, a verified travel specification or a promised gain from swapping the module alone.
What voltage and wiring procedure should I use?
The photos identify motor connector, configuration, DOWN SW, UP SW, BATT(-) and BATT(+) markings. The page provides no voltage, current, fuse size, wire gauge, terminal-level wiring procedure or programming sequence. Use the exact system instructions; visible labels do not replace a wiring diagram.
Is a controller-specific manual supplied here?
The product Support link opens the general Lippert Customer Care Center, not an exact controller PDF. No product-specific installation manual is linked on the focused page. Although the source says no assembly required, that is not a statement that wiring, system setup or installation checks are unnecessary.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 260793 |
|---|---|
| Brand | Lippert |
| Quantity in package | 1 |
| Warranty term | 1 Year |
| Country of origin | USA |
| Unit of measure | EA |
| Supersedes sku | 287196 |
| Reference vendor/manufacturer name | Lippert |
| Heartland part number | 0167078 |
| Keystone rv part number | 388754 |
| Winnebago part number | 179390-01-000 |
| Upc | 848150047465 |
| Shipping dimensions | 6" L x 4" W x 4" H, 0.31 lbs. |
- Will this work with every schwintek slide-out? The focused page identifies a Schwintek bed tilt controller, while some generic text calls it a slide-out replacement. Use the bed tilt system manual and original controller identity to confirm the match. The page does not establish interchangeability with all Schwintek room-slide controllers or name an exact parent-unit SKU.
- Which part does it replace? The source Supersedes SKU field lists 287196. OEM references are Heartland 0167078, Keystone RV 388754 and Winnebago 179390-01-000. These references help identify the component, not every compatible vehicle model or model year.
- What is included? One controller module only. The complete slide-out or bed tilt assembly is excluded. Motors, bed platform, separate harnesses, wall switches and mounting fasteners are not itemized as included. RV/trailer and slide photographs are representative applications, not supplied equipment.
- Which label revision will arrive? The main photo reads 15001-C and LCI260793, while the rendering reads 15001-A and LCI260793. Both appear in the manufacturer gallery; the page does not specify the supplied revision or prove every revision interchangeable. Compare the original controller and confirm the exact replacement requirements.
- How large is the controller? Manufacturer graphics marked Approximate Dimensions show 3.99 inches across the mounting-ear envelope, 2.51 inches in the face direction drawn, and a 1-inch housing depth in the side view. These are not a mounting-hole center spacing or connector-clearance specification. Separately, published shipping dimensions are 6 x 4 x 4 inches and shipping weight 0.31 pounds.
- Does the controller add 18 inches of travel? Lippert describes an 18-inch space benefit for the complete Schwintek bed tilt system. Quick facts and graphics say fully inclined/free space, while narrative copy says fully reclined/sleeping space. This is not an 18-inch controller dimension, a verified travel specification or a promised gain from swapping the module alone.
- What voltage and wiring procedure should i use? The photos identify motor connector, configuration, DOWN SW, UP SW, BATT(-) and BATT(+) markings. The page provides no voltage, current, fuse size, wire gauge, terminal-level wiring procedure or programming sequence. Use the exact system instructions; visible labels do not replace a wiring diagram.
- Is a controller-specific manual supplied here? The product Support link opens the general Lippert Customer Care Center, not an exact controller PDF. No product-specific installation manual is linked on the focused page. Although the source says no assembly required, that is not a statement that wiring, system setup or installation checks are unnecessary.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.











