Lippert J-33 Flush-Mount Slide-Out Service Roller - 244838
Ready to order
Lippert J-33 Flush-Mount Slide-Out Service Roller - 244838
---
Lippert J-33 Flush-Mount Roller 244838
Replace the matching slide-out service roller with Lippert J-33 assembly 244838. The nylon roller is attached to a solid steel plate that mounts flush to the floor. Matching the original roller style and position helps maintain the intended support as the slide-out extends and retracts.
This listing supplies one roller assembly with the roller, base, shaft and two push nuts. Lippert lists J-33 as the Forest River part reference; it does not identify specific Forest River RV models. Installation screws and a complete slide-out system are not itemized as included.
Why Choose This Exact Roller?
- J-33 identity: Lippert part 244838, also listed as Forest River J-33
- Nylon roller supported by a solid steel plate
- Flush floor mounting for the matching original installation
- One assembly with roller, base, shaft and two push nuts
- Published height 1.55 inches and overall width 4 inches
- Roller length 3.63 inches; confirm original system dimensions
Technical Specifications
- SKU: 244838
- Brand: Lippert
- Hardware Type: Roller
- Country of Origin: USA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Unit of Measure: EA
- Reference Vendor/Manufacturer Name: Lippert
- Forest River Part Number: J-33
- UPC: 848150048080
- Shipping Dimensions: 4.5" L x 1.5" W x 1.2" H, 0.53 lbs.
- Service Roller Type: J-33
- Roller Material: Nylon
- Base Material: Steel
- Mounting Style: Flush to floor
- Assembly Height (Inches): 1.55
- Assembly Width (Inches): 4
- Base Depth (Inches): 1.75 (approximate manufacturer drawing)
- Roller Length (Inches): 3.63
- Included Components: Roller, base, shaft and two push nuts
Before You Order
Confirm Lippert 244838 or J-33 in the original RV service information. Lippert states compatibility with multiple Lippert slide-out systems and directs buyers to check their manual. The reviewed page does not name numbered parent assemblies or specific RV model years.
Compare the 1.55-inch height from the bottom of the base to the top of the roller, 4-inch assembly width and 3.63-inch roller length. The approximate-dimensions drawing also labels a 1.75-inch base depth. Mounting-hole spacing, roller diameter, load rating, screw size and tightening specifications are not supplied on the reviewed page.
Compare Roller Styles
The J-13 roller assembly 115622 uses elongated mounting slots and has different published height, width and base depth. It is a comparison for identifying the original service style; interchangeability with J-33 is not established.
Product Images and Installation
The gallery retains five original studio views, an approximate-dimensions drawing, a feature graphic, two representative slide-out graphics and a campsite trailer photo. Representative RV scenes do not establish fitment to a particular vehicle.
Lippert recommends professional installation with assistance from the original RV manufacturer. The product support link opens the general support homepage, without a directly linked J-33 manual or exact component diagram. Use the installed system service instructions for roller quantity, placement and fasteners.
Shipping Measurements
Lippert publishes a 4.5 x 1.5 x 1.2-inch shipping package and a shipping weight of 0.53 lb. These packed measurements are separate from the assembly measurements above.
California Proposition 65 Warning
WARNING: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 244838 |
|---|---|
| Brand | Lippert |
| Hardware type | Roller |
| Country of origin | USA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Unit of measure | EA |
| Reference vendor/manufacturer name | Lippert |
| Forest river part number | J-33 |
| Upc | 848150048080 |
| Shipping dimensions | 4.5" L x 1.5" W x 1.2" H, 0.53 lbs. |
| Service roller type | J-33 |
| Roller material | Nylon |
| Base material | Steel |
| Mounting style | Flush to floor |
| Assembly height (inches) | 1.55 |
| Assembly width (inches) | 4 |
| Base depth (inches) | 1.75 (approximate manufacturer drawing) |
| Roller length (inches) | 3.63 |
| Included components | Roller, base, shaft and two push nuts |
- What is included? One roller assembly with roller, base, shaft and two push nuts. Installation screws are not itemized.
- Which materials are listed? Nylon roller and a solid steel plate.
- What are the assembly dimensions? 1.55 inches high from base bottom to roller top, 4 inches wide and a 3.63-inch roller. The approximate drawing labels a 1.75-inch base depth.
- Does the forest river j-33 reference identify my rv? It is a part cross-reference, not a vehicle fitment list. Check the original RV manual and roller dimensions.
- Does it fit every lippert slide-out? The page states multiple systems but provides no exact numbered parent list. Confirm the installed system before purchase.
- Is j-13 interchangeable? Interchangeability is not established. J-13 has different dimensions and elongated mounting slots.
- How should it be installed? Lippert recommends professional assistance from the original RV manufacturer; follow the installed system instructions.
- What shipping data and warranty are listed? Shipping package 4.5 x 1.5 x 1.2 inches, 0.53 lb; USA origin and one-year warranty term.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.











