Lippert J-2 Slide-Out Service Roller Assembly - 115612
Ready to order
Lippert J-2 Slide-Out Service Roller Assembly - 115612
---
Lippert J-2 Slide-Out Service Roller 115612
Replace a correctly matched J-2 roller in a Lippert RV slide-out installation. The nylon roller is attached to a solid steel base to help support smooth movement during extension and retraction. Elongated screw holes allow placement adjustment when the base is mounted in the correct arrangement.
Lippert supplies one assembly and itemizes the roller, base, shaft and two push nuts. This is an individual service roller rather than a complete slide-out mechanism or multi-roller kit. Separate mounting screws are not listed as included. The RV, slide-out and topper photographs illustrate use and do not identify an exact compatible RV model.
Why Choose This Service Roller?
- Nylon roller on steel base: Helps a correctly matched slide-out extend and retract smoothly.
- Elongated mounting holes: Allow placement adjustment within the existing mounting arrangement.
- One assembly per package: Roller, base, shaft and two push nuts are itemized by Lippert.
- Published physical dimensions: 1.454-inch height, 4.1875-inch width and 5.197-inch depth.
- OEM references: Keystone 104111 and Winnebago 201484-01-000 are listed by Lippert.
- Professional installation recommended: Consult the original RV manufacturer and the system manual before service.
Technical Specifications
- SKU: 115612
- Brand: Lippert
- Hardware Type: Roller
- Country of Origin: USA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Unit of Measure: EA
- Reference Vendor/Manufacturer Name: Lippert
- Keystone RV Part Number: 104111
- Winnebago Part Number: 201484-01-000
- UPC: 848150060440
- Shipping Dimensions: 5.19" L x 4" W x 1.45" H, 1.06 lbs.
- Service Roller Model: J-2
- Roller Material: Nylon
- Base Material: Steel
- Physical Height: 1.454 inches, bottom of base to top of roller
- Physical Width: 4.1875 inches (4-3/16 inches)
- Physical Depth: 5.197 inches
- Included Components: Roller, base, shaft and two push nuts
- Mounting Feature: Elongated screw holes; exact hole spacing not published
Before You Order
Confirm SKU 115612 / J-2 against the original roller and the RV or slide-out manual. Compare the 1.454-inch base-to-roller-top height, 4.1875-inch width, 5.197-inch depth and mounting arrangement. Lippert lists Keystone 104111 and Winnebago 201484-01-000 as OEM references; a brand name alone does not establish fitment.
The manufacturer describes compatibility with multiple Lippert slide-out systems but does not name exact parent models on this focused page. Hole spacing, screw size, torque, roller load rating and required roller count are not published here. Check the original RV manufacturer instructions rather than treating a visually similar roller as interchangeable.
Installation Guidance
Lippert recommends professional installation assistance from the original RV manufacturer. The product support link opens the general support homepage and does not supply an exact J-2 installation manual. Obtain the instructions for the installed system before service.
Compare Another Service Roller
The J-32 floor-edge service roller 249845 is a separately identified part with a different bracket design. Use the part number and physical mounting arrangement to distinguish them; this comparison does not establish interchangeability.
Frequently Asked Questions
What comes in the package?
Lippert itemizes one roller assembly with roller, base, shaft and two push nuts. This is not a complete slide-out mechanism or a multi-roller kit. Mounting screws are not listed among the included components.
What are the physical dimensions?
Lippert states 1.454 inches from the bottom of the base to the top of the roller, 4-3/16 inches (4.1875 inches) wide and 5.197 inches deep. The same values appear in the approximate dimension drawing.
Are the shipping measurements the installed size?
No. Shipping data is 5.19 x 4 x 1.45 inches at 1.06 pounds. The physical dimensions are separately stated as 5.197 inches deep, 4.1875 inches wide and 1.454 inches high. Use the physical drawing for comparison, not the rounded shipping data.
Which slide-outs does J-2 fit?
Lippert describes use with multiple Lippert slide-out systems and directs buyers to check their manual. The focused page and linked general support homepage do not identify exact parent systems, RV models or model years. Verify the original roller and mounting arrangement before ordering.
What OEM part numbers are listed?
The published references are Keystone 104111 and Winnebago 201484-01-000. They do not mean this roller fits every RV from either manufacturer.
Are the mounting holes adjustable?
The elongated screw holes allow placement adjustment. The focused source does not publish the slot spacing, screw size, torque or adjustment range. Compare the installed base and follow the original RV manufacturer instructions.
Can I install it myself?
Lippert recommends professional assistance through the original RV manufacturer. Consult the correct system manual and service department; the product page does not give an exact J-2 installation procedure.
Is J-2 the same as J-32?
J-2 is the designation for SKU 115612. The separately listed J-32 249845 has a different part identity and bracket design. Similar names do not establish interchangeability.
What is the load rating?
The focused product page does not publish a numeric load capacity or the number of rollers needed for an installation. Do not infer a rating or roller count from the representative RV photographs.
| Sku | 115612 |
|---|---|
| Brand | Lippert |
| Hardware type | Roller |
| Country of origin | USA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Unit of measure | EA |
| Reference vendor/manufacturer name | Lippert |
| Keystone rv part number | 104111 |
| Winnebago part number | 201484-01-000 |
| Upc | 848150060440 |
| Shipping dimensions | 5.19" L x 4" W x 1.45" H, 1.06 lbs. |
| Service roller model | J-2 |
| Roller material | Nylon |
| Base material | Steel |
| Physical height | 1.454 inches, bottom of base to top of roller |
| Physical width | 4.1875 inches (4-3/16 inches) |
| Physical depth | 5.197 inches |
| Included components | Roller, base, shaft and two push nuts |
| Mounting feature | Elongated screw holes; exact hole spacing not published |
- What comes in the package? Lippert itemizes one roller assembly with roller, base, shaft and two push nuts. This is not a complete slide-out mechanism or a multi-roller kit. Mounting screws are not listed among the included components.
- What are the physical dimensions? Lippert states 1.454 inches from the bottom of the base to the top of the roller, 4-3/16 inches (4.1875 inches) wide and 5.197 inches deep. The same values appear in the approximate dimension drawing.
- Are the shipping measurements the installed size? No. Shipping data is 5.19 x 4 x 1.45 inches at 1.06 pounds. The physical dimensions are separately stated as 5.197 inches deep, 4.1875 inches wide and 1.454 inches high. Use the physical drawing for comparison, not the rounded shipping data.
- Which slide-outs does j-2 fit? Lippert describes use with multiple Lippert slide-out systems and directs buyers to check their manual. The focused page and linked general support homepage do not identify exact parent systems, RV models or model years. Verify the original roller and mounting arrangement before ordering.
- What oem part numbers are listed? The published references are Keystone 104111 and Winnebago 201484-01-000. They do not mean this roller fits every RV from either manufacturer.
- Are the mounting holes adjustable? The elongated screw holes allow placement adjustment. The focused source does not publish the slot spacing, screw size, torque or adjustment range. Compare the installed base and follow the original RV manufacturer instructions.
- Can i install it myself? Lippert recommends professional assistance through the original RV manufacturer. Consult the correct system manual and service department; the product page does not give an exact J-2 installation procedure.
- Is j-2 the same as j-32? J-2 is the designation for SKU 115612. The separately listed J-32 249845 has a different part identity and bracket design. Similar names do not establish interchangeability.
- What is the load rating? The focused product page does not publish a numeric load capacity or the number of rollers needed for an installation. Do not infer a rating or roller count from the representative RV photographs.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.










